}

Tender For Renovation Of Govt Higher Secondary School In Thevur Town Panchayat, Salem-Tamil Nadu

Local Bodies has published Tender For Renovation Of Govt Higher Secondary School In Thevur Town Panchayat. Submission Date for this Tender is 18-10-2024. Screws Tenders in Salem Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

45674293
Tender For Renovation Of Govt Higher Secondary School In Thevur Town Panchayat
Open Tender
Indian
Tamil Nadu
Salem
18-10-2024

Tender Details

Tender For Renovation Of Govt Higher Secondary School In Thevur Town Panchayat; 1 Dismantaling existing Damaged Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Cuddapah Slab including removing the debries away from the site and all labour charges etc. complete. 2 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 3 Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (M- Sand)), 20mm thick laid in-situ and pointed with same coloured cement 4 Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specificationsfor 10 sqm 5 Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. 6 Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) etc.SD-20) 7 Supply and fixing of 20W LED Tube Light Fitting with LEDof approved quality including cost andconveyance of all materials and labour chargesand other incidental charges to site etc., complete.as per standard specification 8 supply and fixing of 1200mm (48) sweep AC ceiling fan 5 star ratedcomplete ( Lower end)with 2 module 100W fan step regulator (Lower end)with 300mm down rod with fan clamp with side plates and cross arm of size 450mm (18) 9 Supply and delivery of following pipe line (with ISI mark) materials should be got approved by the Engineer incharge before fixing as directed and including conveyance of all materials to site etc., Complete as per standard specification etc complete.32mm PVC Pipe 10 32mm PVC Bend 11 Tap 12 Ball Valve 13 110mm PVC Pipe 14 110mm PVC Bend 15 110mm PVC TEE 16 Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with P trap or S trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. 17 S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in positionwith necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications. - White Colour 18 Supply and Fixing of Bison Panel Doors with Necessay Accessories and Locking Arrangements including cost and conveyance of all materials and labour charges etc., complete as per standard specification 19 Painting two coats over the new wood work using ready mixed enamel paint including cost of all materials to site and all labour charges for mixing applying etc., Complete as per Standard Specifications Rate for 10 Sqm 20 Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains

Key Value

Document Fees
Refer document
EMD
INR 7600.0 /-
Tender Value
Refer document
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail