Tender For Certain Repair To Road And Misc Works At Bakloh Cantt., bakloh-Himachal Pradesh

Tender For Certain Repair To Road And Misc Works At Bakloh Cantt.; 1 Repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc. cutting around edges to at least 25mm in depth, making good by filling screened and graded raod metal. watering and ramming applying tack coat @ 10 Kg/10 Sqm, putting in premixed bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content by weight of total mix using 20mm crushed stone aggregate rolled and compacted to required camber and gradient with 8 to 10 tonne power rollerfor depth of pot holes exceeding 30mm complete all as specified and directed. 2 Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with power sweeper or compressor to remove all loose dirt etc., applying evenly a priming/ tack coat with bituminous primer using paving bitumenat 5 kg per 10 sq metre of road surface, laying bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% bitumen binder content by weight of total mix using 20mm crushed stone aggregate, rolled and compacted to required camber and gradient with 8 to 10 tonne vibrator power roller, complete all as specified and directed. Note:- Bituminous premix semi dense asphaltic concrete shall be mixed in automatic temperature controlled hot mixing plant, transported and premix carpet shall be laid in single layer with self propelled mechanical paver, rolled with vibrator roller. 3 Cat eye two way reflective ABSbodyof size 100mm x 100mm x 18.5mm with reflective panel (Amber red or white) , weight 133 Grams fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and as directed.Make: 3M, SHAKTI, DARKEYE. 4 Convex Mirror 1000mm dia made out of polycarbonate material provided with suitable MS pipe post duly powder coated, meant for road turning, intersection curve, T-junctions, Hospitlas , parking lots etc. with clear and definite mirror image having 130 degree of viewing angle, unbreakable glass, spring post (710 x 80 x 210mm) body of spring is made of special flexile material (polyurethane) without it can be quickly resoted to its original state without doing any damage to spring post as well as vehicle in case of high speed collsion by vehicles. Two bands of reflective tape to be pasted on the spring post. Eposy bond will beused to fix the spring post with road surace. The bond should be so strong that post will not be deviated by strong impact after installation, length of spring post 710 mm upper dia 80mm & botttom dia is 210 mm, fixed in repair complete all as specified and as directed by Engr-in-Charge. 5 Demolition of cementconcrete (unreinforced) of any description and in any position not otherwise specifically provided for complete and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m complete all as specified and directed. 6 Cement concrete work as in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete slab 25 cm or less including use and waste of form work complete all as specified and directed. 7 Finishing surface of concrete roads, pavements, by brooming complete all as specifiedand directed. 8 Forming 12 mm thick expansion joint filled with pre- formed bituminous filler and top with 30 mm primed and sealed with sealing compound grade A for 150 mm thick cement concrete slab complete all as specified and directed. 9 Forming Contraction (Dummy) joints 150mm deep x 10mm wide, filled with sealing compound grade A for , complete all as specified and directed. 10 75mm thick PCC 1:4:8type D-2 (using 40 mm graded crushed stone aggregates)as insub basefinished even and fair to receive topfinish complete all as specified and directed. 11 Machine pressed coloured rubber moulded precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade with grey cement and pigmentlaid over and including 50mm thick sand cushioning, joints of tiles filled with dry sand and compacted with mechanical vibrator complete all as specified and directed. 12 PCC 1:2:4 (nominal mix) type B-1(using 20mm graded crushed stone aggregates) as in kerbs and mud stops, rounded or chamfered on edges and similar works, complete all as specified and directed. 13 Marking lines, dashes, arrows etc of width 10 cms on black top/ concrete surfaces of road using hot applied thermo plastic road marking paint 2.5 mm thick (white/ gold, yellow) mixed with radium glass beads @ 250gm/ Sqm with automatic machine to provide reflectivity and night vision (approx temp being 200°C at the time of laying) including cleaning the surface of all dirt, dust and other foreign material complete all as specified. Note:- Road marking lines at the centre of road shall not be continuous, whereas the lines at outer sides of road shall be continuous i.e in one length. 14 Deduct Credit Amount as per Schedule of credit as details given on Srl Page No 20 of tender doucments.

INR 500 /-

INR 44000.0 /-

INR 22 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB