|
| 1 | Work |
| 2 | Construction of embankment with approved material obtained from bomow pits with a lift uplo 1.5 m.ransporting to site, spreading, grading to required slope and compacting to meel requirement of Tables 300.1 and 300.2 with a lead upto 1000 m and extra cartage 4.00 km. as per Technical Specification Clause 301.5 |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not evdeoding 1.5 m in width or 10 sqm on plan), excavated soil and disposal of surplus excavated sol as directed, within a lead of 50 m including dressing of sides and ramming of bottoms, lift up to 15 m, including getting out the - All kinds of soil As per DAR(2.8.1) |
| 4 | Providing and layingin cement concrete of specified grade excluding the cost of centring and shuttering all work upto plingth level 1:6:12 (1 cement: 6 Coarse sand : 12 brick ballast40 mm size) as per PWD SORS.I. No.273. |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) Rate as per DAR (6.1.2) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering. shuttering finishing and reinforcement A!! work up to plinth level 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) : 3 graded stone aggregate 20mm. Rate as per DSR 5.1.2 |
| 7 | Centering and shuttering including struting, propping etc. and removal of form work for: Foundations. footings. bases of columns, etc for mass concrete Rate as per DAR (5.9.1) |
| 8 | Centering and shuttering including struting, propping etc. and removal of form work for: lintels. beams, plinth beams. girders, bressumers and cantilevers Rate as per DAR (5.9.5) |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : As Per Cement mortar 1:6 (1 cement : 6 coarse sand) Rate as per DAR (6.4.2) |
| 10 | Reinforcement cement concrete work in beams, suspended floors, roof having slope up to 15° landings, balconies, lintels, chajja etc. excluding cost of centering and shuttering etc. 1:1.5:3 (1 cement :1.5 coarse sand (zone-iii) : 3 graded stone aggregate 20mm. Rate as per DAR 5.3 |
| 11 | Centering and shuttering including struting, propping etc. and removal of form work for: lintel beams, roof beams, suspended floor, sunshade etc. Rate as per DAR (5.9.3) |
| 12 | Steel reinforcement for R.C.C. work including straightening Cutting, bending. placing in posilion and binding all complete upto plinth level.. Rate as per DAR (5.22.1) |
| 13 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) as perD.A.R. 13.4.1 |
| 14 | P/L vitrified floor tiles in diff. sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1;4 (1cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm. including grouting the joints with white cement and matching pigments etc. complete. (600 x 600 mm). Rate as per DAR 11.41.2 |
| 15 | P/L vitrified floor tiles in diff. sizes (thickness to be specified by the manufacture) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, in skirting , riser of steps laid over 12mm thick cement mortar 1:3 (1cement : 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm. including grouting the joints with white cement and matching pigments etc. complete. (600 x 600 mm). Rate as per DAR 11.46.2 |
| 16 | Supply and filling in plinth with sand under floors including watering, ramming, consoilidating and dressing complete As per DAR 2.27 |
| 17 | P/F angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm joints mitred and welded by angle iron 35x355mm or 35x5mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixinf of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-in-charge. Rate as per DAR 10.31 |
| 18 | P/F 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying apriming coat of approved steel primer Using M.S. angles 40x40x6 mm for diagonal braces. As per DAR 10.5.1 |
| 19 | Providing and laying birla white wall care putty to smooth existing surface. complete in all respect as per directed by E/IRate as per DAR .13.80 |
| 20 | Finishing with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (a) New work ( Two or more coats applied @ 1.43 Ltr./10 Sqm. over and including bsae coat of water proofing cement paint applied @ 2.20 Kg/10 Sqm.) (b) Extra for applying water proofing cement paint as primer applied @ 2.20 Kg/10 Sqm. instead of primer for exterior finishing. As per DAR -13.46.1 |
| 21 | Distempring with 1st quality acrylic distemper ( ready mixed ) having VOC content less than 50 gram/ litre of approved manufacturer and of required shade and colour all complete to achieve shade and colour : New work (two or more coats) over and including water thinable priming coatwith cement primer having VOC content less than 50 gram/litre.As per DAR -13.41.1 |
| 22 | Painting with synthitic enamel paint of approved brand and manufacture of required colour to give an even shade : two or more coats on new works over an under coat of suitable shade with ordinary paint of approved brand and manufacture .As per DAR -13.62.1 |
| 23 | Supply and fixing of 10 cm dia PVC Pipe complete with rose heads bends PVC Clamps 2.5 cm x 3 mm fixied to wall by 15 cm long 6 mm dia nail and including perpair of plaster etc as per SOR 2020 (maiterl Page No-4 (31)) |
| 24 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. Rate as per DAR. 4.17 |
| 25 | P/F fly proof wire gauze to windows, clerestory windows & doors with M.S. flat 15x3 mm and nuts & bolts complete. Galvanised M.S.wire gauze with 0.63mm dia wire and 1.4mm aperture on both sides. Rate as per DAR.10.29.1 |
| 26 | Wiring point for light with 1.5 sqmm FRLSH PVC insulated multistrand single core copper condutor cable in PVC conduit partly concealed in wall and partiy laid in slab along with the reinforcement complete with 1.5 sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc.complete in all respects.As per SI No. 138(C)+187(A) |
| 27 | Same as items no.- (50) but for fan and light duty. As per SI No.140c+187(A) |
| 28 | Supply & wiring of submains with 2 nos.2.5 sq.mm 1 no earth wire of 1.5 sqmm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab As per SI No 1307(b) |
