|
| 1 | Supply of following Decentralized materials at the works site as per RESSPO norms |
| 2 | Stone pad 300x300x75 mm |
| 3 | X-arms holding clamps with bolts & nuts for ST poles. |
| 4 | F-bracket with bolts & nuts for ST/PCC poles |
| 5 | Al. binding wire |
| 6 | M.S clamp for Top, T-off channel with bolts & nuts for ST poles |
| 7 | P.G clamps for ACSR Weasel/Rabbit conductor |
| 8 | Danger board with clamp & bolts for ST poles |
| 9 | 24 Volt Battery and Battery Charger with Cabinate |
| 10 | 11 KV TPMO complete |
| 11 | 11 KV Fuse set complete |
| 12 | Clamp with nuts & bolts for TPMO & Fuse Set |
| 13 | Clamp for C/B with nuts & bolts |
| 14 | 11 KV Porcelien Vaccum circuit Breaker |
| 15 | Cartage of following materials from Store Center, Mirzapur to work site including loading & unloading charge |
| 16 | ST Poles 13 mtr long |
| 17 | ST Poles 11 mtr long |
| 18 | PCC Poles 8.5 mtr long |
| 19 | Line materials with ACSR Rabbit/ Dog Conductor |
| 20 | 11 KV VCB O/G, 200/100/5A |
| 21 | 11 KV XLPE Cable size 3x300 mm2 |
| 22 | 33 KV VCB with single/double T/F control pannel and CT 200/100/1 A with structure(i) 33 KV VCB (ii) Control pannel I/C for 33 KV single/double T/F(iii) CT 200/100/1-1A(iv) Steel Structure |
| 23 | 33 KV Post Insulator set |
| 24 | Structure for above |
| 25 | 33 KV Lightening Arrestor |
| 26 | Structure for above |
| 27 | 33 KV Bus Isolator |
| 28 | Structure for above |
| 29 | Erection |
| 30 | Erection of single support ST pole 13 mtr long for construction of 11 KV line including digging of pit, fitting of all accessories, back filling of earth & others required work. |
| 31 | Erection of single support ST pole 11 & PCC Pole 8.5 mtr long for construction of 11 KV line including digging of pit, fitting of all accessories, back filling of earth & others required work. |
| 32 | Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms. (cement sand & brick ballast wil be supplied by the constractoron his own his own cost) |
| 33 | Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESSPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 34 | Earthing of Poles |
| 35 | Stringing & sagging of 3 phase HT line (double ckt) upto proper sag including laying of ACSR Rabbit Conductor, binding with insulators & jumpering. |
| 36 | Layingof O/D 11 KV XLPE cable size 3x300 mm2(Duble CKT) as per RESSPO norms |
| 37 | Replacement of Damaged ACSR Weasel Conductor to ACSR Dog conductor |
| 38 | Erection of Sectional Double Pole Structure of ST pole13 mtr long including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets as per RESSPO norms (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 39 | Erection of Sectional Double Pole Structure of ST pole11 mtr long including digging of pit, fitting of all accessories, back filling of earth, grouting of each pole & stay sets as per RESSPO norms (cement sand & brick ballast wil be supplied by the constractor on his own his own cost) |
| 40 | Drill/cut of stone in hilly area for erection of pole |
| 41 | Filling of I/D/O/D 11 KV cable jointing kit size 3x300 mm2 as per RESSPO norms |
| 42 | Installation of 11 KV VCB pannel (O/G), 200/100/5A as per RESSPO norms |
| 43 | Testing & commissioning of O/G 11 KV VCB Pannel as per RESSPO norms |
| 44 | Installation of 33 KV VCB with single/double T/F control pannel and CT 200/100/1 A with structure, 33 KV VCB,Control pannel I/C for 33 KV single/double T/F, CT 200/100/1-1A and Steel Structure |
| 45 | Testing & commissioning of 33 KV VCB with single/double T/F control pannel and CT 200/100/1 A with structure, 33 KV VCB,Control pannel I/C for 33 KV single/double T/F, CT 200/100/1-1A and Steel Structure |
| 46 | Installation of 11 KV TPMO Set as per RESSPO norms |
| 47 | Installation of 11 KV Fuse Set as per RESSPO norms |
| 48 | Installation of 33KV Post Insulatoras per RESSPO norms |
| 49 | Installation of Structure for above as per RESSPO norms |
| 50 | Installation of 33KV Lightening Arreestoras per RESSPO norms |
| 51 | Installation of Structure for above as per RESSPO norms |
| 52 | Installation of 33KV Bus isolatoras per RESSPO norms |
| 53 | Installation of Structure for above as per RESSPO norms |
| 54 | Installation ofPorcelien Vaccum Circuit Breakeras per RESSPO norms |
| 55 | Chemical Earthing of 11 KV VCB pannel etc & connect of all structure through G.I. Strip as per RESSPO norms (All materials will be supplied by the contractor on his own cost). |
| 56 | Chemical Earthing of T\F& connect of all structure through G.I. Strip as per RESSPO norms (All materials will be supplied by the contractor on his own cost). |
| 57 | Received Back Scrap ACSR Weasel Conductor |
| 58 | Received Back Scrap Iron |
