|
| 1 | Dismantling of aluminium partition wall of any description all as directed |
| 2 | Excavation in trenches n,exc 1.5 mtr deep & wideand getting out in any type of soil and n.exc 10 sqm on plant complete all as specified and directed. |
| 3 | M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggt in foundation, filling, mass concrete complete all as specified and directed. |
| 4 | Returning ,filling in ,including ,spreading , levelling , wateringand well ramming in layers n, exc, 25 cm complete all as specified and directed. |
| 5 | Removing excavated material n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point complete all as specified and directed. |
| 6 | Demolition ofBrick work or stone/boulder masonry, built in cementmortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 7 | M&L fly ash brick old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 8 | M&L for PCC 1:4:8 type D2 using 20mm graded coarse aggregates as in sub base, filling , mass concrete complete all as specified and directed. |
| 9 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished and light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchincl 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 10 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished and light shade, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick backing coat of tiles in CM (1:4) complete all as specified and directed. |
| 11 | Dismantling plain or corrugated steel sheeting, any guage, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 12 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mmthick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 13 | M&L for Rendering 15 mm thick in cement mortar 1:4 , mixed with water proofing compound, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement with WPC and WPC to be measured separately complete all as specified. |
| 14 | Supply only Water proofing compound complete. |
| 15 | M&L for Rendering 10 mm thick in cement mortar 1:6, on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified. |
| 16 | M&L for Rendering 5 mm thick in cement mortar 1:3 as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified. |
| 17 | M&L for Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade)by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer complete all as specified and directed. |
| 18 | M&L for Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) to wall surfaces over & including a coat of interior wall primer complete all as specified and directed. |
| 19 | M&L for Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade)to ceiling surfaces of wall or false ceiling over & including a coat of interior primercomplete all as specified and directed. |
| 20 | M&L hardcore of guage n.exc 63mm deposited spread and levelled in layers n.exc 15cm thick using broken stone complete all as specified and directed. |
| 21 | M & L for 75 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) as in sub base of flooring complete all as specified. |
| 22 | M&L for 25mm thick cement cocnrete type B- 0 1:2:4 (12.5mm graded agg ) as in flooring complete. |
| 23 | M&L 18-20mm thick Granite (of any type) work (tablee rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms, floors and like including 15mm thick screed ofcement mortar (1:4), including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed. |
| 24 | S&F 16mm thick toughned glass as in hinged doors, partitions and similar work including cutting to shape, drilling holes required including all necessary fittings(patches, connectors, brackets etc) all as specified and directed.. |
| 25 | S&F Stain less steel of grade 304, chromium plated \"H\" type handle of 32mm dia and length 300mmcomplete all as specified and directed. |
| 26 | S&F stainless steel door lock to glass complete all as specified and directed. |
| 27 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 28 | Demolition of cement concrete (reinforced) in roofs , floors ( other than ground floors ), beams, staircases, landing, chajjas and similar suspended work. |
| 29 | M&L for RCC type B0 1:2:4 using 12.5 graded stone aggregate as in slab supported on walls, chajjas, beams and columns, landing, balconies and the like complete all as specified and directed |
| 30 | M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 31 | M&L for TMT Mild steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 32 | M&L form work to edges of concrete flats, RCC/PCC bandsfloors roofs and similar works exc 10 cm and not exc 20 cm wide surface finished rough to receive plastercomplete all as specified and directed. |
| 33 | Material & Labour for mild steel works for framed work such as in grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 34 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 35 | Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position / height( single storey/ double storey/ tripple storey) by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcherwith cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with MS chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes, including scaffolding upto tripple storey, complete all as specified and directed.Note : (i) The extra area of 300mm around the actual affected area will be checked and repaired and only repaired portion will be taken for measurement.(ii) Rate of scaffolding is deemed to be included in quoted rate. |
| 36 | M&L for preparation of new plastered surfaces and applying 02 coats of exterior emulsion paint (light shade)by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primerover and includingacrylic wall care putty 1.5 to 2.5 mm thickcomplete all as specified and directed. |
| 37 | S&F Mild steel framed work( Fe 290, Gde E-165) for roof trusses (framed), Balconies Chajjas trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed. |
| 38 | M&L for two coat of synthetic enamel paint (finishing coat) over one coat of primer to newsteel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified & directed. |
| 39 | M & L rubber moulded coloured chequeredtiles 30 cmx30 cm x22 mm thick with grey cement and pigment , set jointed and pointed in neat cement slurry as in floorover 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed. |
| 40 | Providing and Laying Premium (1st) quality straight edge, ceramic tiles exterior grade WA value between 3% to 6% , flexural strength greater than 22N/mm², scratch resistance on mohs scale greater than 4 and crazing resistance of 2 cycles in 300x300x7 to 8 mm thick in floors etc. in any shade and design/pattern of light & dark tiles etcset & jointed in neat cement slurry & incl and over 20 mm thick screed in cement mortar (1:4) pointed in matching colored polymer cement based grout to match complete all as specified and directed. |
| 41 | M&L for 75mm thick in PCC 1:3:6 type C-1 as in plinth protection surface finished even and smooth without using extra cement comlete all as specified and directed |
| 42 | Taking down Shutters of any description exc 1 sq. m but n.exc 2 Sqm eachcomplete all as specified and directed |
| 43 | Taking down Wooden/steel Chowkat or Frame with Shutter (without taking off Shutter from the Frame), not exc. 1.50 Square Metre Each,complete and all as directed by Engineer in Charge. |
| 44 | Taking down chowkhats or frames of any description exc 1.5 Sqm and n. exc. 4 sqm each (without taking off shutters from the frame) including cutting hole to size for receive fresh PCC of hold fast and making good the disturbed surface same complete all as specified and directed. |
| 45 | M&L for Powder coated (Minimum thickness of powder coating 50 micron) Anodised aluminium frames for shutters , windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 46 | S&F 5mm thick tinted glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete all as specified and directed. |
| 47 | S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDm gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete all as specified and directed. |
| 48 | S&F powder coated aluminium butt hinges 100mm complete all as specified and directed. |
| 49 | S&F powder coated aluiminium tower bolt 150mm long complete all as specified and directed.. |
| 50 | S&F powder coated aluminium handles 100mm complete all as specified and directed. |
| 51 | S&FPressed steel frames made of MS sheet of 1.20mm thickness of size 125 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts,complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish.Cost of the same will be included in this items). |
| 52 | M&LPCC 1:3:6 type C-0 in 12.5 mm graded stone aggregates as in hold fast filling inside frame etc complete all as specified |
| 53 | S&F secondclass hard wood 35 mm thick factory made plain framed panelled shutters (any numbers of panels) with panels of timber flat on both sides (feather edged) or of veneered particles board medium density wood particle board with commercial face veneers,supplied and fitted to chowkats complete all as specified and directed. |
| 54 | S&F 35 mm thick factory made second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges for receiving glass etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed. |
| 55 | M&L for two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to newwooden surfaces of any description over 10 cm width or girth incl preparation of surfaces complete all as specified and directed. |
| 56 | S&F 100 mm size mild steel butt hinges, medium weight cold rolled (including fixing with nails/screws or welded as required) complete all as specified and directed. |
| 57 | S&F Aluminium alloy anodised sliding door bolt250mm long , of extruded sections or cast-aluminum alloy complete all as specified and directed. |
| 58 | S&F 150 mm aluminium anodised barreltower bolt of extruded section and fixed. |
| 59 | S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 60 | S&F in stainless steel wire cloth 0.36mm normal dia of wire and average with apparture 1.40mm and fixed with tinned tacks or stainless steel wire staples complete all as specified and directed. |
| 61 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
