}

Tender For Providing Additional Infrastructure In Amma Unavagam At Pammal Zone No.01 Tcmc, Chengalpattu-Tamil Nadu

Municipal Adminitration And Water Supply Department has published Tender For Providing Additional Infrastructure In Amma Unavagam At Pammal Zone No.01 Tcmc. Submission Date for this Tender is 25-10-2024. Kitchen Equipment Tenders in Chengalpattu Tamil Nadu. Bidders can get complete Tender details and download the document.




Tender Notice

45645373
Corrigendum : Tender For Providing Additional Infrastructure In Amma Unavagam At Pammal Zone No.01 Tcmc
Open Tender
Indian
Tamil Nadu
Chengalpattu
25-10-2024

Tender Details

Tender For Providing Additional Infrastructure In Amma Unavagam At Pammal Zone No.01 Tcmc; 1 Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specificationspecification. 2 Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. 3 Supplying, fabricating, erecting and fixing Hilux (or) Equivalent Board False Ceiling upto a ceiling height of 4.5m from floor levelUsing Perforated Sheets (10mm thick) 4 Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic(USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., LowPressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact. 250 Litres 5 Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer.The colour & quality of tiles should be got approved by Municipal Engineer before use on work 6 Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 7 Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 8 Supply and fixing of 24W LED 4000K 2 x 2 Square Type Recessed Fitting with LEDcomplete with electronic ballast with TW round blockson wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting. 9 Supply and fixing of 450mm (18) sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wal SD-118 10 Supply and fixing of 1200 mm (48) sweep AC ceiling fan complete with stepped electronic 300W regulator, with 1 metre down rod with fan clamp with side plates and cross arm of size 450 mm (18) SD-106 11 Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mm x 100mm x 113mm TW switch box with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point SD-38 12 Supply of Commericial Refrigator per direction by departmental officers 13 Repair and Maintenance of Double Burner Commercial Type LPG Gas Stove to change brass burner, Gas tube, Regulator and Replacement of Open close Brass Vales as per direction by departmental officers 14 Supply, Delivery and Fixing of New Double Burner Commercial Type LPG Gas Stove for brass burner, ISI mark Gas tube, Regulator as per direction by departmental officers 15 Repair and Maintenance Commercial Type Wet Grinder to replace the Grinder Blade, Ball Bearing, Shafts and Rewinding of Motor as per direction by departmental officers 16 Supply of Numeric Counter Billing Machine using 220 volt and billing specification stored as per direction by departmental officers

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 23-10-2024 Extension of Date Date 25-10-2024

Key Value

Document Fees
Refer document
EMD
INR 16200.0 /-
Tender Value
INR 16.20 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail