|
| 1 | Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed. |
| 2 | M&L for Brickwork with burnt brick old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)complete all as specified and directed. |
| 3 | All as per srl item No. 2 here-in-before but except brick. |
| 4 | All as per srl item No. 2 here-in-before but except brick in cement mortar 1:4. |
| 5 | Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed . |
| 6 | M & L for 75mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed. Note:- Finishing surfaces of concrete to be even and rough to receive the topping layer. |
| 7 | M&L for cement concrete tiles 30cm x 30cm x 25mm thick machine pressed set and jointed and pointed in neat cement slurry in floor with grey cement and pigment, coloured made in PVC mould with vibration process prelaminated for glossy finish over 15 mm thick screed bed in CM 1;4 , complete all as specified and directed. |
| 8 | M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete al as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by Engr-In-Charge and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 9 | Material and labour for machine pressed precast concrete interlocking paver block of glossy/ polished finished in any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-40 grade rubber moulded glossy finish (50% Red and 50% Yellow) with grey cement and pigment incl the dismentling and removing of the exsiting tilescomplete all as secified and as directed.Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks & laying pattern approved by Engr-In-Charge. |
| 10 | M & L for machine pressed precast concrete interlocking paver block of glossy/ polished finished in any shape & size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade rubber moulded glossy finish (50% Red and 50% Yellow) with grey cement and pigment incl the dismentling and removing of the exsiting tilescomplete all as secified and as directed.Note-Shapes of interlocking paver block shall be triangular/Zigzag/Haxagon/or other ,Colour of paver blocks & laying pattern approved by Engr-In-Charge. |
| 11 | M & L for sand filling under floors or in foundations including watering and consolidation or layer of sand cushioning below interlocking paver blockcomplete all as specified and as directed. |
| 12 | S&F 70 mm thick factory made precast RCC manholes covers including precast frame of any size & shape ( Squre/rectangular/circular ), light duty , conforming to IS 12592, Fixed at site etc including demolition / dismentling of the existing manhole covers of area not exc 1.5 Sqm each and deposited and all as complete all as specified and directed by Engr-In-Charge. |
| 13 | Excavation in trenches not exceeding 1.50 metres wide and not exceeding. 1.50 metre in depthand getting out inany type of soil etc., complete all as specified and directed by Engr-in-Charge. |
| 14 | M & L for providing cement concrete type D-1 (1:4:8) using 40 mm graded crushed stone aggregate as in foundations,filling and massconcrete including necessary form work complete all as specified. |
| 15 | M & L for cement concrete1:2:4 type B2, including necessary formwork using 40mm graded crushed stone aggregate, as in surface channels and drains etc including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge |
| 16 | S&F in repair, stack clamps out of 50mm by 5mm flat iron and 16mm dia roundiron stays including bolts and nuts and securing ends of stays to wall or roofsuitable for 110mm dia including drilling holes and fixed complete all as specified and directed. |
| 17 | Taking down eaves gutter and rain water pipe any size any pattern ,PVC/ AC pipeincluding all fittings ,Internal dia of pipe in 75/110mm complete all as specified and directed. |
| 18 | Demolition and breaking up drain pipe SGSW pipe set in cement mortar incl. Haunching and bed concrete for 300mm dia SWG pipe and rubbish off the premises. |
| 19 | M&Lfor concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 300 mm bore pipe, complete all as specified and directed by Engr-in-Charge. |
| 20 | M & L for Reinforced concrete pipes, 300 mm class NP 3 with one collar per length of pipe complete all as specified. |
| 21 | S&F 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 22 | S&F in repair 110mm bore, PVC (SWR), bends any radius complete all as specified and directed. |
| 23 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etcincluding necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed. |
| 24 | M&L for Rendering 15 mm thick 1:4 on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement complete all specified and as directed. |
| 25 | M & L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement complete all as specified and as directed.(Note:- WPC shall be measured and paid separately) |
| 26 | Supply only liquid water proofing compound |
| 27 | M&L for Preparing newly plaster surfaces & applyingone Coat of Cement Primer of, any colour over two coats of cement base paint complete all as specified & directed. |
| 28 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25mm thick with excavated soil all as specified. |
| 29 | Removing excavated material not exceeding 50m and deposited where directed by Engr-in-Charge at a level not exceeding 1.50m above starting point, complete all as specified and directed by Engr-in-Charge. |
| 30 | Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only . |
| 31 | M & L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately). |
| 32 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and as directed |
| 33 | M & L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and as directed. |
| 34 | Dismantling posts or struts (RCC) any section, including taking out embedded portion and making good disturbed ground surfaces. |
| 35 | Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete. |
| 36 | M & L for cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in post/strut/foundation filling in mass concrete complete and all as specified and directed. |
| 37 | Dismentling wrought iron or mild steel work of any description, Complete all as specified and as directed. |
| 38 | M&L for MS work conforing to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work andflat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete and all as specified and directed. |
| 39 | S & F in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete. |
| 40 | Dismantling chanlink fencing of any gauge & size complete all as directed by Engr-in-Charge. |
| 41 | S&F Chain link fencing using 4mm dia GI wire 75x75mm mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed. |
| 42 | Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long. |
| 43 | S&F Barbed rozor tap concertina coil SG hot galvanised spring tensile wire manufactured by M/S Special Steel Ltd or M/S Super Fence or M/S Global Engg or other equivalent make as approved by GE of UTS 145 to 150 Kg/mm2 and dia of coil when stretched 610mm having minimum number of circles 10/RM, minimum number of clips 25/RM & minimum weight of coil 1.625Kg/RM hot dip galvanised including taking out existing damaged concertina coil complete all as specified and directed by Engr-in-Charge. |
| 44 | Restraining and resecuring of barbed wire including removal & refixing of concerntina coil wherever required in single/double security fencing/on security wall complete all as directed. |
| 45 | M & L for preparation of new steel and iron surfaces of any description over 10cms width or girth & applying two coat of synthetic enamel paint over one coat of red oxide primer complete. |
| 46 | M & L for preparation of old steel and iron surfacesarea of each not exe 0.80 Sqm of steel and iron posts & applying 2 coats of synthetic enamel paintcomplete. |
| 47 | M&L Providing precast RCC Jali 35 mm thick (measured solid), incl all moulding type B0 1:2:4 using 12.5 mm graded stone aggregate set in cement mortar 1:4 incl demolition of the existing jali complete all as specified and directed. |
| 48 | M&L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in coping,kneelers, kerbs, water troughs, and the like weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge. |
| 49 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 68,550.00and any other reduction if any from quoted amount. |
