KTW TEMBHI TQ.VAIJAPUR DIST. CHHSAMBHAJINAGAR - Excavation in all kinds of soil including boulders upto 0.60 m. diameter (0.113 cum.) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or for formation of service road/embenkment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift 2 Excavation in hard murum including boulders upto 0.60 m diameter (0.113 cum) for canal, seating of embankment, filter drains/ catch water drains etc. and placing excavated stuff neatly in dump area or formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc with 1 km lead and 6 m. lift. 3 Excavation in soft rock without blasting including boulders upto 0.60 m. diameter (0.113 cum) for canal, seating of embankment, filter drains/ catch water drains etc and placing excavated stuff neatly in dump area or for formation of service road as directed including cost of all machinery, labour, dressing bed and sides to required level and profile etc. with 1 km. lead and 6 m. lift 4 Excavation in hard rock of all toughness by blasting including boulders above 0.60 m diameter (0.113 cum) minimising damage to sides slope of excavation in water prism area by adopting any one or combination of line drilling / pre- spliting / smooth blasting techniques and placing the excavated rock neatly in approved dump area as directed including cost of all machinery, labour, levelling bed etc with lead upto 15 m and lift 6 m 5 Providing laying rubble soling below foundation in layers including filling with rubble chips, murum etc. complete as directed 6 Providing and fixing in position TMT-FE-500 bar reinforcement steel of various diameter for R. C. C. pile, caps, footing, foundation, slabs, beams, columns, canopies, staircase, newels, chajjas, lintel, pardies, copings, fins, arches etc as per detailed design drawing and schedules 7 Providing and laying in situ cement concrete of grade M. 150 (40 MSA) of trap/granite / gneiss/quartzite graded metal for PCC with or without surface reainforcement/ RCC concreting requiring heavy of special type of shuttering for works of gallery. sluice, spillway crest, spillway down stream face, energy dissipating structurs, intake structurs, training walls, piers, abutment etc with batching plants and Transit mixer with shuttering and scaffolding curing etc. completed with an initial lead 50 m and lift 1.50 m. 8 Providing and fixing sill beams RSJ 150 x 100 mm sizeas per detailed design and drawing including one coat of anticorrosive paint with two coats of oil paints etc. completed with all leads and lifts as directed and as per specification. 9 Providing and fixing M. S. channels 150 x 100 mm size fabricated from 8 mm. plate including fabrication with 12 mm. dia hooks of 50 cm in length including one coat of anticorrosive paint with two coats of oil paints etc Complete with all leads and lifts as directed and as per specification. 10 Providing and fixing in position M.S. Needles 2 12 x 0.50 mm size as per detailed design and drawing including two coat of anticorrosive paint with two coats of oil paints etc. complete with all leads and lifts as directed and as per specification 11 Back filling upto ground level behind the ground level behind the canal structures etc completed (without royalty) with suitable material of approved quality in layers not exceeding 20 cm. without disturbing the structeur etc. completed. 12 Providing casing embankment using selected impervious material available directly from excavation in layers including cost of materials, machinery, labour, all other operations such as collection of material, spreading soil in layer of specified thickness, sorting out, breaking clods, levelling, sectioning edges/ sides, watering compacting each layer to density control of not less then 95 percent or as stipulated using vibratory compactor etc., completed with lead upto 1 km for watering and 6m lift. 13 Providing and constructing 230 mm thick dry nuttie stone pitching with pin headers at 2 per sig using stones and stone chipe from approved sources including cost of all material labour, hard packing wedging stone chips, finishing ats.completed with lead upts 50 m and its as directed
