|
| 1 | S/F of steeel Tubuler pole 9.5mtr long Designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc comp. in all respect.(Sch No. 619) |
| 2 | Painting of the electric pole with 2 coats of aluminium paint over red oxide primer .complete in all res.(Sch.No. 634) |
| 3 | Cables S/L of alluminium conducter PVC insulated armoond served sheated 10 sqmm 2 core cable complete in all respect.(Sch.No. 501-B) |
| 4 | S/F of 6way square MS Frame L.E.D light complete in all respect…..market rate |
| 5 | Supply and wiring of submains with 2 nos. 4 sq mmPVC insulated 1100 V grade single core multistrand copper conductor cable in existing PVC conduit complete, including supply of all material, labour and T & P etc. required for proper completion (Sch. No. 291-A) |
| 6 | supply & buring 600x600x6mm of vertical G.I. plate erthing (Sch. No. 702) |
| 7 | S/F of LED Flood Light fiting having die cast alluminium body and diffuser/reflector with driver set suitable for 175 to 200watt confirming to IP66 protection …complete in all respect (Sch. No. 1455)Cat-AAA |
| 8 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN (Sch.No. 807-A) |
| 9 | S/F of Sign Board 60x90mm redium numbering and photo of light(Market Rate) |
| 10 | S/F of 20 mm dia Flexible pipe …. Complete in all respect.. |
| 11 | 12.5Mtr pole semi high mast light |
| 12 | Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect (Sch. No. 651) |
| 13 | Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over acushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface thecable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 25sq. mm 3.5 core (Sch. No. 501-J) |
| 14 | Supply and Wiring of submains with 04 no. wire of 4 sq.mm. FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of the work as directed at site by Engineer in charge.(Sch. No.289-C) |
| 15 | Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.25 sq. mm 3-1/2 core (Sch. No.503-J) |
| 16 | Supply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge.(Sch No. 504-E) |
| 17 | S/f of PVC 20mm dia Flexible pipe ….. Complete item |
| 18 | Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) (Sch. No. 725-D) |
| 19 | Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 175 to 200 Watt. Confirming to IP 66 protection complete in all respect. CAT- AAA (Sch.No. 1455) |
| 20 | Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN,complete in all respect.40 A TPN(Sch.No. 807-F) |
| 21 | S/F of Sign Board…………Complete item |
| 22 | Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc complete in all respect.(Sch No.409 Cat-AAA) |
