Tender For Addn/ Altn Of Store Sheds At Talegaon Under Ge Dehu Road.; 1 Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital orsimilar pattern roof covering, in wall cladding and valley gutters complete all as specified and directed. 2 Taking down steel gates of size (3.8 m x 3.7 m) containing two shutters and weighing approximately 500 kg (2 shutters) and refixing after carrying out repair to door covering sheets, steel members, rollers, bottom channels, greasing of wheels etc. complete all as specified and directed.NOTE: Replacement and repairs to door covering sheets, steel members, rollers, bottom channels, wheels etc. shall be measured and paid separately. 3 Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed. 4 Dismantling structural steel work including doors, gates but excluding framed trusses, complete all as specified and directed. 5 Running welding in repairs for thickness of metal to be welded exc 6mm but not exc 9 mm, complete all as specified and directed. 6 Demolition of concrete (unreinforced) of any description and in any position not otherwise specifically provided; complete all as specified and directed. 7 Demolition of brick work or stone boulder masonry, built in cement mortar, in any position including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles; complete all as specified and directed. 8 M&L for providing 75 mm thick PCC 1:4:8 mix, type D-2 (using 40 mm graded stone aggregate) as in sub base; complete all as specified and directed. 9 M&L for providing 100mm thick plain cement concrete 1:2:4 type B-2 (using 40mm nominal size graded crushed stone aggregates) as in flooring finished even and smooth without using extra cement complete; complete all as specified and directed. 10 M&L Brickwork with fly ashbricks of class designation 75 (kgf/cm²), straight or curved on plan exceeding 6 metre mean radius and built in cement mortar 1:6 ; complete all as specified and directed. 11 M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing surface even & smooth without using extra cement; complete all as specified and directed. 12 M&L for preparation of newly plastered or unplastered surfaces of walls and applying three coats of white wash; complete all as specified and as directed. 13 M&L precast RCC 1:2:4 type B1 (using 20mm graded stone aggregates) in landings, cover slabs (for manholes, drain etc.), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:6;complete all as specified and as directed. 14 M&L Plain cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregates) in surface channels and drains; complete all as specified and directed. 15 M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc.; complete all as specified and as directed. NOTE: Inner girth only shall be measured. 16 M&L Plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregates) as in coping, bed blocks etc including weathering, slightly rounded or chamfered angles and throating and use and waste of formwork, complete all as specified and directed. 17 S&F Mild steel screw bolts (machine made) diameter of neck5 mm to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long; complete all as specified and directed.. 18 S&F Galvanised, corrugated mild steel sheeting 0.80 mm thick with two corrugations side lap, fixed with L-type or J-type hooks with washers, in roofs, bent to a curve (to any radius) as required at site etc.,with grade of zinc coating 275;complete all as specified and directed. 19 S&F Galvanised, corrugated mild steel sheeting 0.80 mm thick with two corrugations side lap, fixed with L-type or J-type hooks with washers, in walls etc., with grade of zinc coating 275;complete all as specified and directed. 20 S&F Machine pressed 1.00 mm thick plain galvanised mild steel sheeting as in ridges, hips, valley gutters (Trapezoidal section) drip and straight flashing with grade of Zinc coating 275; complete all as specified and directed. 21 M&L surface excavation as in soft loose soil n.exc 30cm deep and averaging 15 cm in deep and getting out;complete all as specified and directed. 22 Removing excavated materials to a distance exc 250 m but n.exc 500 m and depositing where directed. 23 M&L Hardcore of broken stone or boulders of gauge exc 63 mm but n.exc 100 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered, rolled and rammed to a true surface; complete all as specified and directed. 24 M&L Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in 100 mm thick sub base; complete all as specified and directed. 25 M&L 150 mm thick plain cement concrete work as in pavement/ hard standing of flexural strength 40 Kg/Sq.cm in field using 400 kg of cement per cum of concrete; complete all as specified and directed. 26 M&L for forming expansion joints 12 mm thick, 150 mm deep, filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound grade A, complete all as specified and directed. 27 M&L for forming construction joint 30 mm deep x 10 mm wide sealed with sealing compound grade A for 100 mm thick flooring complete all as specified and directed. 28 M&L for forming contraction (Dummy) joint 65 mm deep x 10 mm wide sealed with sealing compound grade A for 100 mm thick flooring complete all as specified and directed. 29 S&F Rolled mild steel sections framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe 410 Gde E-250; complete all as specified and directed. 30 S&F in repairs cast iron work grade FG 150, machined, in pulleys and similar articles not exceeding 5 kg each; complete all as specified and directed. 31 Supply, fabricate and erect or fix Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guide for sliding doors; fixed with angle cleat or other connecting plates conforming to Fe 410 W Gde E-250 quality A; complete all as specified and directed. 32 S&F Mild Steel work as in wind tie for roof including securing bolt or any other work including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165; complete all as specified and directed. 33 Supply, fabricate and erect or fix Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment with MS Gde Fe 410-0 Gde-E- 250) quality-A; complete all as specified and directed. 34 M&L for preparation of new steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 35 M&L for preparation of old painted steel surface of any description over 10 cm width or girthand applying two coats of synthetic enamel paint over one coat of red oxide primer completeall as specified and directed 36 M&L for preparation of new or previously untreated concrete surfaces of any description over 10 cm girth or width, not otherwise described and applying two coats of Synthetic enamel paint over a coat of primer; complete all as specified and directed. 37 S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with coach screw and washer in roof or wall etc; completeall as specified and as directed by Engineer-in-Charge. 38 M&L writing letters or figures (Block. Roman, Italic or Indian) in synthetic enamel paint in two coats n exc. 30 cm high complete all as specified and directed. 39 M&L obliterating old writing of any description, n exc 0.1 Sq.m, with paint to match existing work; complete all as specified and directed. 40 Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc; complete all as specified and directed. 41 M&L Point wiring with 1.5 sqmm single core multistranded copper conductor FRLSH cable of PVC insulated and unsheathedtype alongwith 1.5 sqmm PVC insulated unsheathed single core multistranded copper conductor FRLSH cable for continuous earthing in & including stove enamelled steel conduit& accessories having ISI markedsurface type to be fixed with proper screws/ (MS steel strips if required) including hard PVC boards/Boxes of suitable sizes & making arrangement for fixing switches, sockets, switch socket combination, fan, regulator etc; complete all as specified and directed for the following:-NOTE:Color coding to be followed as given R, Y & B - Phase, Black-Neutral & G- Earthing 42 (a) Two light points controlled by one switch. 43 (b)One 3 pin socket outlet, 5 amps on same board with cables of size 1.5 sq.mm. 44 (c)One 3 pin socket outlet, 5 amps on independent board with cables of size 1.5 sq.mm. 45 S&F Switch piano flush type single pole one way 5 Amps all as specified and directed. 46 S&F Switch socket combination 2 in 1, 5 pin 5 Amps flush type all as specified and directed. 47 S&F One 3 pin socket outlet, 5 amps all as specified and directed. 48 S&F Ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on and including PVC block of suitable size; complete all as specified and directed. 49 S&F in repair MCB DB SPN sheet metal enclosure double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 8 way; complete all as specified and directed. 50 S&F6 - 32 amp rating SP, 240V, C curve miniature circuit breaker (MCB) in the MCB DB complete with connection testing and commissioning; complete all as specified and directed. 51 M&L Sub main wiring for light pointwith 2 x 2.5 sqmm PVC insulated unsheathed single core multistranded copper conductor cableFRLSH drawn through & including stove enamelled steel conduit alongwith 2.5 sqmm copper conductor FRLSH cable for earth continuity. NOTE :The scope of work and rate quoted shall be inclusive of the following:-(i)2 runs of 2.5 sqmm cable, one run of 2.5 sqmm cable and one run of stove enamelled steel conduit will be measured as one RM, with all necessary accessories having ISI marked, surface type to be fixed with proper screws/ (MS steel strips if required) including hard steel boxes of suitable sizes & making arrangement for fixing DB for MCB.(ii) One MCB control by two light point, and light point shall be measured as sub main due to item required to be executed in work shop building,(iii)Color coding to be followed shall be R-Phase, B-Neutral & G- Earthing 52 S&F in repair35 W, 5700 K, AL PDC Housing LED Wellglass Luminaries (low bay light) equipped with 4 kv inbuilt surge protection, IP 65 protection rating; complete all as specified and directed. (Eye bolt shall be provided for mounting fitting).MAKE: CAT No. BY 300P LED 27S CW PSU S1 PC of Philips or equivalent model in makes specified in Appendix C. 53 S&F32Amp rating SPN, 240V, 10 KA, C curve miniature circuit breaker (MCB)in the MCB DB complete with connection testing and commissioning. 54 S&F 16 Amp rating SPN, 240V, 10 KA, C curve miniature circuit breaker (MCB)in the MCB DB complete with connection testing and commissioning; complete all as specified and directed. 55 M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel; connected to earthing test point all as specified or indicated, connected to main switch board or any other electrical equipment all as shown in electrical plate No -3 of SSR-2009 Part-I; including necessary excavation and earth work in any type of soil, 20mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4) type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc. including testing on completion; complete all as specified and directed.NOTE : The unit rate includes earth lead and 15mm medium grade GI protection pipe maximum upto 7.5 Metre from earth plate to earth point/test point. 56 M&L Earth continuity conductor or main earthing lead 4mm dia galvanised iron or steel wire; fixed to wall on batten or recess or in chases or buried in ground / floor or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc. as required. 57 S&F pedestal fan sweep 450 mm, high speed 1350 RPM, 240V, single phase with copper motor complete all as specified and directed. 58 Supply, Laying , jointing and testing in repairs LT underground cable 2 Core 10 Sq.mm, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls including cable gland of suitable sizesand aluminium lugs for connection complete all as specified and directed. 59 Excavation in trenches n. exc. 1.5 mtr in width and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in hard / dense soil complete all as specified and directed. 60 Returning, filling in excavated soil in trenches including spreading, levelling, watering and well rammingin layers n. exc. 25 cm thick complete all as specified and directed. 61 Removing excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed. 62 S&F HDPE DWC pipe 40 mm dia, ISI Marked, fixed on walls, ceilings or in floors, trenches etc. for cable protection all as specified and directed. MAKE: Infra/Supreme/Prince 63 M&L for road cutting for laying of cables and refilling the excavated materials in trenches and top disturbed surface shall be made good the in PCC 1:3:6 type C-2(using 40 mm graded stone aggregates) complete all as directed. 64 Design, fabricating, supplying, erecting, connecting and testing totally enclosed LT cubicle panel board 3 Phase 4 wire system outdoor double door front and back sloped canopy (Hood) on top, incoming and outgoing feeders duly marked on riveted plates etc complete, CPRI approved factory made, fabricated out of3 mm thick CRCA sheet duly treatedthrough 7 tank pre treatment process andpainted with epoxy powder coated matt finish ofSIEMENS GREY structural RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor of suitable size for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on and including MS angle iron frame of suitable size of 50mm x 50mm x 6mm thick, 30 cm above ground level & 30 cm below ground level land complete all as specified and directed and shall also consist of the following:- 65 (a)Busbar Chamber: Electrical grade Bus bar aluminium of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeveand mounted on suitable size of F class insulators made of non hygroscopic, non combustible, track resistant high strength FRP insulatorsfor phases andneutral set of 4 for RYB &N-01 set 66 (b) Digital Voltmeter -01 No 67 (c) Digital Ammeter with set of CTs -01 No 68 (d) Blank 69 (e) Blank 70 (f)Indicating lamp RYB -01 Set 71 (g)MCB SPN 32 A,10 KA C Curve 72 S&F Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including galvanised steel earth strip of size of 32 mm x 6 mmby means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated,connected to main switch board or any other electrical equipment all as shown in electrical plate No -3 of SSR-2009 Part-I and including necessary excavation and earth work in any type of soil, 20mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4) type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS handle iron frame etc complete including testing on completion, all as specified & directed.NOTE : The unit rate includes earth lead and 40mm light grade GI protection pipe maximum upto 7.5 Metre from earth plate to earth point/test point.
