Tender For Maintenance Of Water Supply (Annual Repairing Of Pvc Water Line In Sector-46, 47 And 48), Noida. (For Two Years), 1 Dismentaling Manualy/By Mechanical Means I/C Stacking Of Servisable Material And Disposal Of Unserviceble Material Within 50 M, noida-Uttar Pradesh

Tender For Maintenance of Water supply (Annual Repairing Of Pvc Water Line In Sector-46, 47 And 48), Noida. (For Two Years), 1 Dismentaling manualy/by mechanical means i/c stacking of servisable material and disposal of unserviceble material within 50 mtr. lead as per direction of E/I. bituminous road. 2 Earth work in excavation by mecanical means (hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 Sqm. on plan) i/c dressing of sides and ramming of bottoms, lift upto 1.5 m, i/c getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. The contractor has to detect different utilities like sewer line, water supply line, electric cable, telephone cable, gas pipe line etc. using utility detecting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-Charge. All kind of soil. 3 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, lead upto 50 m and lift upto 1.5 m. 4 Supply of PVC pipe 6Kg/cm2 pressure with required PVC standard special confirming to IS : 4985-2000 with latest amendment Make- Finolex Industries Ltd./Kisan/Supreme Industries Ltd. (Rate as per comparative statement per Rm.) 5 a) 90 mm dia with coupler @ 6 Kgf/Cm2 Pressure 6 b) 110 mm dia with coupler @ 6 Kgf/Cm2 Pressure 7 c) 140 mm dia with coupler @ 6 Kgf/Cm2 Pressure 8 d) 160 mm dia with coupler @ 6 Kgf/Cm2 Pressure 9 e) 200 mm dia with coupler @ 6 Kgf/Cm2 Pressure 10 f) 250 mm dia with coupler @ 6 Kgf/Cm2 Pressure 11 P/F M.S. Special such Tee, Bends, collars, Taperscap pieces pipes including flange ends as required painting, cutting, welding as per site requirement of MS pipe thickness etc. complete in all respect as per the direction of E/I. 12 Reparing of existing PVC water line I/c bailing out of water by / Manually / Diesel Engine, P/F PVC coupler, CID joint etc. complete work as per direction of E/I (But Excluding cost of excavation filling and PVC pipe) 13 a) 90 mm dia. 14 b) 110 mm dia. 15 c) 140 mm dia. 16 d) 160 mm dia. 17 e) 200 mm dia. 18 f) 250 mm dia. 19 P/L in position Cement Concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth level in 1:2:4 (1 Cement : 2 coarse sand(Zone-III) derived from natural souress : 4 graded stone aggregate 20 mm nominal size derived from natural souress. 20 Cemnet concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all material, labour, Tools & plants etc. required for proper completion of the work. 21 Repairing of sulice valve with the change of spendle (i.e. S.S. non megnated) flapper adjusting nut & bolts & rod & welding machining of body for fitting the flapper properly complete as per direction of E/I. 22 a) 150 mm dia 23 b) 250 mm dia 24 c) 300 mm dia 25 d) 400 mm dia 26 e) 450 mm dia 27 Repairing of Reflex valve with the change of flapper sheet i/c new lever, rubber sheet,m MS ring, S.S pin shaft & shaft rubber etc. complete. 28 a) 150 mm dia 29 b) 300 mm dia 30 c) 400 mm dia 31 d) 450 mm dia 32 Hiring of Gas cutting set with oxygen and LPG running time @ 6 Hrs. 33 Hiring of welding set runnign time @ 6 Hrs. 34 Hiring of Diesel Engine (Including cost of diesel, lubricant & operation) 35 Hire Charge of Generator (Including cost service of operating staff, supply of lubricating oil and diesel also. 36 DG Set/Generator 50 KVA

INR 2832 /-

INR 108500.0 /-

INR 54.15 Lakhs /-