Tender For Certain Repair In Ncc Ota Under Ge Gwalior; 1 Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and directed. 2 M&L for 9 to 10 mm thick vitrified, light shade coloured and printed tiles (Square/Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in CM (1:6)set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 3 M&L for 9 to 10 mm thick vitrified, coloured and printed tiles of width as directed as in skirting fixed over and including 10 mm thick cement screed in CM (1:6)set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 4 M&L for 7mm to 8 mm thick non skid ceramic tiles, joint free, coloured tiles(Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in CM (1:4)set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 5 M&L for same as Item No 4 above for 7mm to 8 mm thick ceramic tiles, joint free, as in skirting fixed over and including 10 mm thick cement screed in CM (1:6)set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 6 M&L for 300mm x 450mm x 7 to 8 mm thick digital glazed ceramic tiles, coloured tiles on vertical faces i.e. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4)complete all as specified and directed. 7 M&L for 300mmx300mmx 6 to 7 mm thick non skidjoint free ceramic coloured tiles in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6)complete all as specified and directed. 8 Demolition of cement concreteof any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed. 9 M&L for 75mm thick PCC (1:2:4) Type C2using 40mm graded stone aggregate as in plinth protection surface even and fair without using extra cement including forming and filling expension joints of size 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and directed. 10 M&L for Plain cement concrete (1:5:10) type D2 (using 40 mm graded stone aggregate) as in foundations/mass concrete complete all as specified and directed. 11 M&L for PCC (1:4:8) Type D2using 40mm graded stone aggregate as in foundation filling mass concrete, complete all as specified and directed. 12 M&L for PCC (1:2:4) Type B2using 40mm graded stone aggregate as in foundation filling mass concrete, complete all as specified and directed. 13 Material and labour for Preparing of old decoratedsurface of walls of plastered or unplastered surfaces bybrooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots andapplying one coat of cement base paint complete all as specified and directed. 14 Material and labour for Preparing of old decoratedsurface of walls of plastered or unplastered surfaces bybrooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots andapplying two coats of cement base paint complete all as specified and directed. 15 Material and labour for Prepartion of old or new plastered surfaces of wall, chajjas etc and applying one coat of weather proof water based emulsion paint(Acrylic paint exterior grade) complete all as specified and directed. 16 M&L for complete removal of existing treatment(internal and external suraces) on wallsby scrapping with steel wire brush or any other meansand applying two coats of distamper oil emulsion over and including two coats of wall care putty on wall complete all as specified and directed. 17 Material and labour for Preparation of old decoratedsurface of walls of plastered or unplastered surfaces bybrooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots andapplying one coat of white wash complete all as specified and directed. 18 Material and labour for Preparing of old decoratedsurface of Ceilings of plastered or unplastered surfaces bybrooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed. 19 Material and labour for applying one coat of white wash on ceilings complete all as specified and directed. 20 Material and labour for Preparing of old decoratedsurface of walls of plastered or unplastered surfaces bybrooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots complete all as specified and directed. 21 Material and labour for applying two coats of white wash on walls complete all as specified and directed. 22 Material and labour for applying two coats of white wash on ceilings complete all as specified and directed. 23 Material and labour for applying one coat of distamper oil emulsion on walls complete all as specified and directed. 24 Taking downcement or cement lime plaster on brick or stone walls or ceilings including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. 25 M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces, applied in two layers i.e. 1st layer of 10 mm thick rendering in cement mortar (1:6) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4) and top layer mixed with water proofing compound as per manufacturers instruction & finished even and smooth without using extra cement complete all as specified and directed.(Note:- Water proofing compound shall be measured and paid seperately under appropriate item of BOQ as supply only) 26 M&L for 10 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cementcomplete all as specified and as directed. 27 M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed. 28 M&L for preparation of new plastered surfaces of wall applying two coats of oil bound distemper over a coat of Birla wall care putty on plastered surfaces on wall including preparation of surfaces complete all as specified and directed. 29 M&L for preparation of the newly plastered surfacesof ceiling & applyingtwo coats of white wash on ceiling surfaces complete all as specified and directed. 30 M&L for preparation of the newly plastered surfacesof wall & applyingtwo coats of cement base paint surfaces & applying one coat of priming paint complete all as specified and directed. 31 S&F in renewal of galvanised wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mmand fixed with tinned tacks or galvanisedstaples complete all as specified and directed. 32 Supply only 3mm thick sheet glass ordinary quality in square n.exc 0.5 sqm each pane in new glazed shutter, complete all as specified and directed. 33 Supply only 3mm thick pin headed sheet glass quality in square n.exc 0.5 sqm each pane in new glazed shutter, complete all as specified and directed. 34 S&F in renewal of600x450 mm size looking mirror of selected quality glass mounted on 4mm thick AC building board or commercial plywood and fixed to wooden plug with chromiun plated screws complete all as specified and directed. 35 S&F for PVC bath room cabinate mirror of Size 500mmx400 mm complete all as specified and directed. 36 S&F in renewal of curtain rod stainless steel decorative type 25 mm diaincluding fixing bracket and end knobs complete all as specified and directed. 37 Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed. 38 Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed. 39 Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe complete all as specified and directed. 40 S&F for 15 mm medium grade galvanized tube with all fitting all fixed to wall and ceiling or laid in floor, complete all as specified and directed. 41 S&F for 20 mm medium grade galvanized tube with all fitting all fixed to wall and ceiling or laid in floor complete all as specified and directed. 42 S&F for 25 mm medium grade galvanized tube with all fitting all fixed to wall and ceiling or laid in floor,complete all as specified and directed. 43 S&F for rotational moulded poly-ethylene three layered insulation puff tanks(cylinderical vertical) 500 litres capacity, white colour hoisted and fixed in position complete all as specified and directed. 44 S&F for rotational moulded poly-ethylene three layered insulation puff tanks(cylinderical vertical) 1000 litres capacity, white colour hoisted and fixed in position complete all as specified and directed. 45 S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. 46 S&F for renewal of 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod& high density plastic ball screwed for iron pipe and fixed 20mm dia of pipe (Minimum weight 15mm-142gms/ 20mm-210gms/25mm-455gms/40mm - 690 gms) complete all as specified and directed. 47 S&F for renewal of gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed. 48 S&F for renewal of gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 25mm bore complete all as specified and directed. 49 S&F for renewal of sheet glass shelf assembly consisting of 5.5mm thick sheet glass 12 cm wide with CP bracket guard and railing 60 cm long, complete all as specified and directed. 50 S&F for renewal of CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. 51 S&F for peg set of six S.S. fixed to wall with PVC plugs and screw complete all as specified and directed. 52 M&L for renewal of vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete and making good to floor complete all as specified and directed. 53 S&F for renewal ofvitreous china wash basin, white, flat back, of size 550 x 400mm Including waste coupling, waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed.Note : Pillar tap andPVC connection will be measured paid separetly. 54 S&F for renewal of PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle including bracket complete of capacity 10 litres, complete all as specified and directed. 55 Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed. 56 S&F for renewal of viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device including CP Jet complete all as specified and directed. 57 S&F for renewal of Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. 58 S&F for renewal of 15mm size pillar taps fancy type long body chromium plated, cast copper alloy, with capston heads, screwed down high pressure, with lettered hot or Cold with long screwed shanks and flynuts, screwedfor iron pipe complete all as specified and directed. 59 S&F for renewal of 15mm size angle cock chromium plated, cast copper alloy, with capston heads, screwed down high pressure, with lettered hot or Cold with long screwed shanks and flynuts, screwedfor iron pipe fixed and complete all as specified and directed. 60 S&F for renewal of 15mm, bib tapFancy type long body chromium plated, cast copper alloy, with capston heads, screwed down high pressure, with lettered hot or Cold with long screwed shanks and flynuts, screwedfor iron pipe complete all as specified and directed. 61 S&F for renewal of shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed. 62 S&F for renewal of PVC waste pipe flexible type 32mm bore, complete all as specified and directed. 63 S&F for renewal of waste couplingfittings, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified and directed. 64 S&F for renewal of 40 mm dia bore waste coupling fittings, brass chromium plated for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other fixedcomplete all as specified and directed. 65 S&F in renewal of 8mm thick glass corner of radius300mm with decorative SS ring and fixed to wall with SS D type brackets complete all as specified and directed. 66 S&F in renewal of stainless steel Toilet paper holder recessed type, complete all as specified and directed. 67 S&F for renewal of Health Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed. 68 S&Fin renewal of wall mixer with Two in one pattern in of brass CP, complete all as specified and directed. 69 Excavation in post holes (or similar holes)each not exc 0.5 cum, getting out, in soft/loose soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm each layer watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed. 70 M&L for plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. 71 M&L for MS flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. 72 Supply only Chain link fencing including line wire any mesh, size and type to any standards, rails straining bolts etc including provision of binding wire complete all as specified and directed. 73 Fixing only chain link fencing including line wires, any mesh, size and any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. 74 S&F for mild steel screw bolts (machine made) exceeding 5cm and not exceeding 10cm long withhexagonal or square heads at one end and screwed the other fitted with washer and one hexagonal or square nut complete all as specified and directed. 75 Taking down existing tarfelt and plaster from roof and removing from site complete all as specified and directed. 76 M&L for 15mm thick rendering in CM (1:4) over roof, surface finished even and smooth mixed with water proofing compound complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately under appropriate item of BOQ as Supply only 77 M&L for plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. 78 M&L for applying water proofing treatment with the following coats:- (a) First coat of bitumen primer conforming to IS- 3384 @ 0.3 kg/sqm (b) Second Layer of APP based polymeric membrane minimum weighing 3 kg /sqm and minimum 3 mm thick reinforced with polyster non wooden fabric (Wt. not less than 150 gms/ Sqm) land on primed surface by torch application complete all as specified and directed. 79 M&L for one coat of aluminium bituminous paint over polymetric membrane complete all as specified and directed. 80 Suply only Liquid water proofing compound complete all as specified and directed. 81 M&L for mild steel Round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and welding with with flats of chain link fencing Fe-410 W (Gde E-250) quality-A or Fe-290 (Gde E-165) complete all as specified and directed. 82 M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 83 M&L for preparation of new steel surface of any description not exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 84 Removing excavated materiel exc 250 m but n.exc 500m and deposting where directed complete all as specified and directed. 85 M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion, drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc wind ties for roof including securing bolts posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets or securing wire mesh etc including all necessary drilling, bolting or rivetting, etc and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed. 86 S&F for 4 mm thick False ceiling HPSC pre-prime non asbestos fibre cement building board (E-classic size 600mm x 600 mm/ 595 mm x 595 mm) decorative finish fixed with clips and screw includingpowder coated galvanised MS grid frame work false ceiling of (Main Tee size 32mmx24mmx0.45mm cross tee 24mmx24mmx0.35mm) and with slot for fixing including suspended with 2mm dia GIwirehangers fixed with steel dash through fasteners from purline of the roof complete all as specified and directed.
