Thrissur Corporation Koorekanchery Zonal-Gym Equipments For Open Gymatdiv-43 [Panamukku Road,Kanikkamatha Church Road] Project No: 397/24-25, thrissur-Kerala

THRISSUR CORPORATION KOOREKANCHERY ZONAL-GYM EQUIPMENTS FOR OPEN GYMATDIV-43 [PANAMUKKU ROAD,KANIKKAMATHA CHURCH ROAD] PROJECT NO: 397/24-25 - 1 CHEST PRESS Providing and fixing using minimum 100 NB GI pipe for Main Frame , 32 Nb Gi pipe handle frame, 25 Nb Gi pipe clamps, nylon 66 injection molded casing ,foot rest : Lid Roto molded seat within built bolts 3/8”X1.5”pipe Cap: Nylon 66 injection molded. Bearing Housing and pin-seamless pipe and round, Bearings: permanent sealed of reputed makePowder coat: Done by pure polyester powder with 70-80 micron thickness powder 2 ARMROTATOR Providing and fixing using minimum 100NBGIpipeforMainFrame Best Quality bearing Powder coat:Donebypurepolyester powder with 70-80 micron thickness powder 3 ELLIPTICAL Providing and fixing using minimum 100 NB GI pipe for Main Frame minimum 40 NB & 25 NB GI pipe for FOOTRestPipe,minimum40NB&25 NB GI pipe for handle, minimum 25 NB & 40 NB GI pipe for connecting pipe, LLDP roto molded seat within built bolts 3/8” X 1.5” for FOOTREST, nylon 66 injection molded bearing cap & pipe cap , fully done by first coat of primer jotun brad 40-50 micron thickness and top coat ofpure polyester powder with 70-80 micron thickness powder 4 LEG PRESS MainpipeDia-127mm., Thickness-3mmBaseplateDia-200mm.,Thickness-10mm.Powdercoat:Donebypurepolyester powder with 70-80 micron thickness powderSIZE:- 2185*X460*X1700*mm 5 MONKEY BAR Providing and fixingusingminimum 100 NB GI pipe forMainFrame, 32 NbGi pipe handle frame, 25 Nb Gi pipe clamps, nylon 66 injection molded casing, Cap: Nylon 66 injection molded. Bearing Housing and pin-seamless pipe andround, Bearings: permanent sealed of reputed make,Powdercoat:Donebypurepolyster powderwith70-80micronthickness powder . 6 ROWER GALVANIZED IRON:-Fabricated with main post of 114mm dia and rest of the pipes are of 50mm dia . Either GI pipes.WELDING:-All joints of pipe are MIG welded with joints scalloped as necessary and dressed off removing sharp edgesandburrs.Zincprimer paint to be applied at all welding points prior to finishing.POWDERCOATING:-Powdercoated using Akzo Nobel or equivalent of70 - 80 micron thick. 7 TRIPPLE TWISTER Pipe-structuremadeofG.I.PipeOF 114 mm OD.ConnectingPipe–MadeofG.I.Pipe OF 42 OD.HandleFrame-MadeofG.I.Pipe OF 32 OD.Bearing – Thrust ball bearing BearingCaps-MadeupofHDPE Material 62 mmTwisterPlates–MadeofLLDPE Pole Caps – Made up of HDPE Material.PowderCoated(Thickness90 micron) 8 SINGLE STEPPER Providing and fixing using minimum 100 NB GI pipe for Main Frame, minimum 25 NB GI pipe for handle frame,minimum 25NB & 20 NB GI pipeforseatingframestand,molded seatwithinbuilt bolts 3/8”X 1.5” for FOOTRESTnylon66injectionmolded bearingcap&pipecap,fullydoneby first coat of primer jotun brad 40-50 micron thickness and top coat of pure polyester powder with 70-80 micron thickness powder coat 9 BOX LETTER LED BOARD ACRYLIC LED BOARD with GI pipe frame4 Ft x 10 Ft (approx)

INR 2200 /-

INR 25000.0 /-

INR 10 Lakhs /-