Tender for renovation of ward office located in Naini Ward 20, 1 Dismantling existing plaster including disposal of refuse with in a distance of 60 m. 2 Dismantling of CC ON FLOOR SOR 3 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to 15: 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete 4 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 5 12 MM thick cement plaster 1:4 with cement and sand mortar 6 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 7 Wall painting (two coats) with plastic emulsion paint of first quality approved brand manufacture on undecorated wall surface to give an even shade i/c thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared smooth as 8 Fixing of Mild steel or iron work in Angle iron Door window frame including cutting welding & wastage including supply of all material etc required for proper completion of work. 9 Providing and fixing 1mm thick, M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm thick M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of read lead paint on all sides and digonal bracing etc complete. As Per DSR Code 10.5.2Using flats30x6mm for diagonal braces and central cross piece. 10 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 11 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1.2 (1 cement hardener mix 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed 2 litre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. 11 Providing and fixing ISI marked flush door shutters conforming to IS2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters DSR 18.9.21.1.135 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 12 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes 13 S/F of 24 guage Aluminum sheet on toilet door shutters bottom including fising with aluminum greeves 14 Supplying and fixing of 20 mm thick Kota stone in flooring, risers of steps. skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing all work complete as per direction of E-1-C 15 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operationsApplying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound onforming to 15. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. 1Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to 15: 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement 5 coarse sand) admixed with water proofing compound conforming to 15: 2645 and approved by Engineer- in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to 15: 2645 and approved by Engineerin-charge.Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement:4 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge 16 Providing and placing on terrace polythlene water storage tank IS: 12701 marked with cover and suitable locking aggangement and making necessary holes for inlet, outlet and overflow pipes but out fitting and baser support tank etc. all complete. 17 P/F EUROPEAN TYPE WC with seat and 10 lit flushing cistern & CP flush bend with fittings & C.I brackets 40mm flush bend etc complete all fittings as per required 18 P/F INDIAN TYPE WC with seat and 10 lit flushing cistern & CP flush bend with fittings & C.I brackets 40mm flush bend etc complete all fittings, as per required 19 P/F white viterous china wash basin with CI/MS brackests 15 mm CP brass waste of standard pattern 550*400mm with 15 mm cp brass pillar tap. 20 P/F flexible PVC flexible waste pipe for wash basin including waste fittings32 mm dia 21 Providing & fixing soil, waste and vent pipes.100mm dia centrifugally cast iron S & S pipe 22 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes 23 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes 24 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes 25 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931a) 15mm nominal bore 26 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931a) 15mm nominal bore 27 Providing and fixing factory made three track three panels uPVC white colour Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with 5.5 friction hinges made of (big series) frame 70 mmX 40 mm and above, sash 25x 50 mm and above & mullion 25 x 50 mm and above all having wall thickness of 2.3± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). (DSR 9.147.A4.1)Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardwares and drainage of water etc. After fixing frame the gap 28 Casement cum fixed panel window having both end single casement panel, middle fixed panels and at top completely fixed ventilator with S.S friction hinges made of (big series) frame 64X50 mm and above, sash 64 x 70 mm and above, & mullion 64 x 70 mm and above all having wall thickness of 2.3 0.2 mm and single glazing bead/double glazing bead of appropriate dimension. (Area of window above 3.00 sqm upto 5.00 sqm). 29 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness arld 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineerin- charge Extruded section profile size 48x40 mm 30 Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness arld 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineerin- charge Extruded section profile size 48x40 mm 31 signage 32 main board 33 FALSE CEILING 34 LIGHT FALSE CEILING 35 horticulture 36 providing and fixing of gate 37 Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed In wall & partly laid in slab along with the reinforcement before concreting.complete with 1.5 sq.mm, FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano typeswitches & ceiling rose / angle / batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 38 Wiring point for fan with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor 5.000 No 671.000 3355.000 cable in PVC conduit pipe partly concealed in wall & partly lald in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch& ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 39 Wiring point for plug with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and plano type switches & socket etc., complete in all respects as directed 40 Supply and fixing of 6amp to 32 amp SP MCB 41 Supply and fixing of Ceiling Fans with fan motor of AC permanent insulation cpacitator rating confirming BEE 5 Star rating and IS: 374/79 and Also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1-PH AC the fan assembled should consist of down rod blades, shakel canopies etc. and with double wall bearing system BEE 5 star rated - 1200 mm sweep Sl No. 1501 i 42 Supply and fixing of tubelights including all fittings etc complete
