tender for Water Proofing work, Repair of Doors and Windows, Water supply Pipeline, Kitchen Bathroom & Toilets and Fixing ofPVC Water Storage Tank of Residential Quarters at Sector No. 02 of Rihand Colony, Pipri- Sonebhadra (U.P.) Sl. No. Item Description 1 Schedule- 01Water proofing work to prevent rainwater leakage from the roofs of Residential Quarters at Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) 2 Providing and Laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litlr/sqm by the same membrane manufactured of density at 25oC , 0.87-0.89 kg/litre and viscosity 70-160 cpsover the primer coat,the layer of membrane shall be laid using butane torch and sealing all joints etc. and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under- joint strength in longitudinal and transeverse direction at 23oC as 350/300 N/5 cm. Tear strenght inlongitudinal and transeverse direction as 60/80 N. Softnening point of membrane not less than 150oC, Cold flexibility shall be upto 2oC when tested in accordance with ASTM D-5147 The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane 3 Scraping/ Dismantling of existing plaster orold tarfelt/torchshield from roof including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters. 4 Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm (3/8) depth, watering the area and then replastering or repointing of 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. 5 Schedule- 02Repair andMaintenance work of doors and windows of Residential Quarters at Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) 6 Engagement of carpenter mistri for non-measured work in repair and maintenance of wood work as per direction of Engineer-in-charge with all T&P required (Labour rates only). 7 Engagement of helper/ Beldar for non-measured work such as helping carpenter and other miscellaneous work as per direction of Engineer-in-charge. 8 Cement concrete with 2 cm. gauge approved stone ballast, approved coarse sand and cement in the proportion 4:2:1 including cost of all materials, labour and T&P etc. required for proper completion of work. 9 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than one brick thick. 10 Brick work with old or dismentled bricks in 1:6 cement and coarse sand mortar in 230 mm thick wall in super structure including cost of all material, labour and T&P etc. required for proper complition of work but excluding the cost of bricks. 11 Mild steel or iron work in heavy size such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materilas supplied by contractor. 12 S/F welded wire mesh size 75 X 25 mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded asrequired including costs of drilling holes, washer welding etc as required including cost of all labour, materials and T&P required for proper completion of the work. Except cost of M.S. angle and flat. 13 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. 14 Dismantling brick work or stone masonry work in lime or cement mortar and including stacking of material as directed by the Engineer-in-charge within a distance of 60 meters. 15 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters. 16 Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. 17 Dismantling doors and windows chaukhats including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters. 18 Countrywood wrought framed and fixed including simple, mouldings straight work as in chaukhats including supply of all materials, labour and T&P etc. required for proper completionof the work. 19 Dismantling of doors or windows leaves including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters. 20 Supply and fixing of 4cm thick country wood bracedand battened doors / windows shutter including supply and fixing of wooden cleats & stoppers and including fixing & adjustment of hinges, bolts, locks, handles, springs and/or other fittings but excluding their supply. 21 supply and fixing of 32 mm thich single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to I.S.2202 part-1(1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks,handles,springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. 22 supply and fixing of 32 mm thich double leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to I.S.2202 part-1(1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks,handles,springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. 23 S/F of Galvenized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Country wood battens 8cmx1cm and including supply and fixing of necessary screws, all materials, labour and T&P etc. required for proper completion of work. 24 Renewing door cleats including supply of all materials, labour and T&P etc. required for proper completion of work. 25 Providing and replacing of L drops 16 mm Ø x 300 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete . 26 Providing and replacing of L drops 16 mm Ø x 200 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete. 27 Providing and replacing of Tower bolts 10 mm Ø x 250 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 28 Providing and replacing of Tower bolts 10 mm Ø x 100 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 29 Iron Hinges 100 mm size & 12 gauge thick of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 30 Providing and replacing of M.S. Handles 100 to 150 mm size of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 31 Painting one coat of iron oxide/wood primer on new wood/iron surface and one coat of approved superior quality ready mix paint including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc.required for proper completion of work. 32 Painting one coat over Ist coat surface of approved superior quality ready mix enamel paint including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc.required for proper completion of work. 33 Schedule- 03Providing and Fixing of PVC Water storage Tank with necesary fittings of Residential Quarters at Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) 34 Engagement of plumber for non measured work in repair and maintenance work in internal /external water supply pipe line as per direction of engineer-in-charge with all T&P required (Labour rates only). 35 Engagement of helper/ Beldar for non-measured work such as helping carpenter, plumber and other miscellaneous work as per direction of Engineer-in-charge. 36 Excavation in foundation in soil mixed with moorum/ shingle/kankar requiring the use of special such T&P such as pickaxes, sabbals etc. including lift upto 1.5 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of the foundation. 37 Concrete with 4cm. gauge stone ballast down graded, coarse sand of 2.5 fineness modulus and cement in proportion of 12:6:1 in foundation and under floors including cost of all materials, labour, tools and plants etc. required for proper completion of work. 38 Cement concrete with 2 cm. gauge approved stone ballast, approved coarse sand and cement in the proportion 4:2:1 including cost of all materials, labour and T&P etc. required for proper completion of work. 39 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in foundation and plinth including cost of all material, labour and T&P etc. required for proper completion of work. 40 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than one brick thick. 41 Mild steel or iron work in heavy size such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materilas supplied by contractor. 42 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. 43 Dismantling brick work or stone masonry work in lime or cement mortar and including stacking of material as directed by the Engineer-in-charge within a distance of 60 meters. 44 Dismantling cement concrete or brick or granolithic floor, including base concrete and including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 meters. 45 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters. 46 Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. 47 Providing & fixing 15 mm dia ISI approved CPVC / UPVCPipe complete with specials as bends, tee, sockets cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also in includes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete. 48 Supply and fixing of 15mm dia PVC float valve with brass union & rod complete ISI marked including supply of all materials, labour and T&P etc. required for proper completion of work. 49 Providing and fixing Brass stop cock 15 mm dia ISI marked heavy quality including supply of all material, labour and T&P required for proper complition of work. 50 Supply and fixing Brass bib cock heavy quality 15mm dia (200gms) ISI marked including supply of all materials labour. T&P etc. required for the proper completion of the work. 51 Supply and fixing 15mm Dia CI/PVC bib cock including replacing of old bib cock completed. 52 Providing and fixing 15mm dia C.P. brass pillar cock heavy quality of approved make including cost of all materials, labour and T&P etc. required for proper completion of work. 53 Providing & replacing of 15 mm dia G.I. union size approved make and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 54 Supply and fixing of Syntax or equivalent make water storage tank including supply of all materials, labour and T&P etc. required for proper completion of the work. 55 Schedule- 04Repairing and maintenance of Water supply pipeline of Residential Quarters at Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) 56 Engagement of plumber for non measured work in repair and maintenance work in internal /external water supply pipe line as per direction of engineer-in-charge with all T&P required (Labour rates only). 57 Engagement of helper/ Beldar for non-measured work such as helping plumber and other miscellaneous work as per direction of Engineer-in-charge. 58 Excavation in foundation in soil mixed with moorum/ shingle/kankar requiring the use of special such T&P such as pickaxes, sabbals etc. including lift upto 1.5 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building & sides of the foundation. 59 Cement concrete with 2 cm. gauge approved stone ballast, approved coarse sand and cement in the proportion 4:2:1 including cost of all materials, labour and T&P etc. required for proper completion of work. 60 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in foundation and plinth including cost of all material, labour and T&P etc. required for proper completion of work. 61 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. 62 Dismantling brick work or stone masonry work in lime or cement mortar and including stacking of material as directed by the Engineer-in-charge within a distance of 60 meters. 63 Dismantling cement concrete or brick or granolithic floor, including base concrete and including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 meters. 64 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters. 65 Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. 66 Providing & fixing 15 mm dia ISI approved CPVC / UPVCPipe complete with specials as bends, tee, sockets cross, clamps, etc. Earth work including filling the trenches etc. required for proper completion of the work. The rate also in includes concealed G.I. fitting where required, cutting and making good the walls etc. and all material labour T&P etc. complete. 67 Providing and fixing Brass stop cock 15 mm dia ISI marked heavy quality including supply of all material, labour and T&P required for proper complition of work. 68 Supply and fixing Brass bib cock heavy quality 15mm dia (200gms) ISI marked including supply of all materials labour. T&P etc. required for the proper completion of the work. 69 Supply and fixing 15mm Dia CI/PVC bib cock including replacing of old bib cock completed. 70 Providing and fixing 15mm dia C.P. brass pillar cock heavy quality of approved make including cost of all materials, labour and T&P etc. required for proper completion of work. 71 Providing & replacing of 15 mm dia G.I. union size approved make and as per sample approved by E/I etc. for repair of pipe line including cost of all materials, labour and T&P etc. required for proper completion of work. 72 Schedule- 05Repair andMaintenance of Kitchen, Bathroom and Toilet of Residential Quarters at Sector No. 02, Rihand Colony, Pipri- Sonebhadra (U.P.) 73 Cement concrete with 2 cm. gauge approved stone ballast, approved coarse sand and cement in the proportion 4:2:1 including cost of all materials, labour and T&P etc. required for proper completion of work. 74 Engagement of helper/ Beldar for non-measured work andmiscellaneous work as per direction of Engineer-in-charge. 75 R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:2:4 for slabs with Chopan coarse sand excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G. binding wire and also including cost of all materials. cost of binding wire, labour and T&P etc. required for proper completion of work. 76 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in foundation and plinth including cost of all material, labour and T&P etc. required for proper completion of work. 77 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than one brick thick. (230mm). 78 1st class brick work in 1:6 cement and coarse sand of 2.25 F.M. mortars in super structure including necessary cutting and moulding of brick as required and also including honey comb brick work, thickness of wall shall not be less than half brick thick. (115mm). 79 Brick work with old or dismentled bricks in 1:6 cement and coarse sand mortar in 230 mm thick wall in super structure including cost of all material, labour and T&P etc. required for proper complition of work but excluding the cost of bricks. 80 Mild steel or iron work in heavy size such as trusses built up gates, door frames, record, racks roof work gates etc. wrought to required form including holes rivetting or welding where necessary and also fixing in proper position and alignment including cost of all materilas supplied by contractor. 81 TMT or TOR steel in plain work such as reinforced concrete or reinforced brick work (when not included in over all rates) wrought to required shape as necessary including bending as per requirement and direction of E/l for proper completion of work and including supply of steel, its wastage, labour and T&P etc. complete (bend hooks ands authorized overlapping in reinforcement shall be measured). 82 S/F welded wire mesh size 75 X 25 mm and rectangular made out of 10 SWG over M.S. angle frame with M.S. flat welded asrequired including costs of drilling holes, washer welding etc as required including cost of all labour, materials and T&P required for proper completion of the work. Except cost of M.S. angle and flat. 83 12mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. 84 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand 2.5 fineness modulus over brick work, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. 85 12mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand 2.5 fineness modulus on ceiling, minimum thickness not to be less than 1 cm including supply of all materials, labour & T&P etc. required for proper completion of work. 86 3 mm thick neat cement floating coat including cost of all material labour and T&P etc required for proper completion of the work. 87 2.5 cm thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 2cm graded approved stone ballast laid in panels finished with 3mm floating coat of neat cement as specified and removing over lapping of mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of work. 88 Dismantling brick work or stone masonry work in lime or cement mortar and including stacking of material as directed by the Engineer-in-charge within a distance of 60 meters. 89 Dismantling reinforced cement concrete of rainforced brick work including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 meters. 90 Dismantling cement concrete or brick or granolithic floor, including base concrete and including stacking of dismantled material as directed by the Engineer-in-charge within a distance of 60 meters. 91 Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters. 92 Repair of plaster in patches including removal of old damaged surface of plaster, cleaning the same thoroughly and racking out joints to 1cm. depth, watering the area and then replastering of mix. 1:4 cement sand mortar and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for completion of the work. 93 Repair of 2.5 cm. cement floor in patches consisting of one part cement, 2 part approved coarse sand and 4 parts 12mm down graded approved stone grit adding concrete hardener of approved make in specified proportion or as directed by E/I and disposal of rubbish outside corporation area including supply of all materials, labour and T&P etc. required for proper completion of work. 94 Providing and fixing of 32 mm dia P.V.C. waste pipe for sink or wash basin. 95 Dismantling doors and windows chaukhats including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters. 96 Countrywood wrought framed and fixed including simple, mouldings straight work as in chaukhats including supply of all materials, labour and T&P etc. required for proper completionof the work. 97 Dismantling of doors or windows leaves including stacking of materials as directed by Engineer-in-charge within a distance of 60 meters. 98 Supply and fixing of 4cm thick country wood bracedand battened doors / windows shutter including supply and fixing of wooden cleats & stoppers and including fixing & adjustment of hinges, bolts, locks, handles, springs and/or other fittings but excluding their supply. 99 supply and fixing of 32 mm thich single leaf flush door shutter ( boiled water resistance, phenol maldehide resin bonded, hot pressed factory made ) commercial quality to I.S.2202 part-1(1983) ISI marked including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts,locks,handles,springs and other fittings but excluding their supply including all materials, labour & T&P etc. required for proper completion of work. 100 S/F of Galvenized Mosquitos proof heavy quality iron wire gauge (14x24) over window frames and including supply of Country wood battens 8cmx1cm and including supply and fixing of necessary screws, all materials, labour and T&P etc. required for proper completion of work. 101 Providing and replacing of L drops 16 mm Ø x 300 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete. 102 Providing and replacing of L drops 16 mm Ø x 200 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 103 Providing and replacing of Tower bolts 10 mm Ø x 250 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 104 Providing and replacing of Tower bolts 10 mm Ø x 150 mm long of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete 105 Iron Hinges 100 mm size & 12 gauge thick of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete(UPPTCL 20.17-d) 106 Providing and replacing of M.S. Handles 100 to 150 mm size of chromium polished iron fittings of approved make as per sample approved by Engineer-in-charge including cost of nuts, bolts & screws etc. complete(UPPTCL 20.17-f) 107 Providing & replacing white glazed earthen ware W.C. ‘Orissa’ pan of Hindware or equivalent make of (580x440) mm size of approved sample including cost of all materials, labour and T&P etc. completion of work. 108 Providing and Fixing 10 Litres low level PVC Cistern complete with all fittings including supply of all materials,labour and T&P etc. required for the proper complition of the work. 109 Providing and fixing 450x300 mm wash hand basin of white glazed earthen ware first quality ISI marked ( Hindustan, Neycer/Ceramake) including supply of all materials, labour and T&P etc. required for the proper complition of the work. 110 Providing and fixing white glazed P or S trap including cement concrete and all materials, lablur cartage T&P etc. requuired for proper completion of the work. 111 Providing and fixing stainless steel sink 610x450x200 mm heavy quality standard quality ISI marked including all materials, labours cartage T&P etc. required for the proper complition of the work. 112 Painting one coat of iron oxide/wood primer on new wood/iron surface and one coat of approved superior quality ready mix paint including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc.required for proper completion of work. 113 White washing two coats including of all materials, labour and T&P etc. required for proper comletion of work 114 Color washing each coat using approved coloring material and labour including supply of all materials, labour and T& P etc. required for proper comletion of the work.
