Tender For The Work Of Issuing 650 Kva Connection (Lmv-7) Through Independent Feeder In Village Gutila For Jal Jeevan Mission On Semi Turn Key Basis In Full Deposit Scheme Under The Area Of Edd-1 Agra., 1 Part-A (Supply of Material)Stone Pad 2 D/P Clamp 3 Barbed Wire 4 Number Plate 5 Danger Board 6 Nut &Bolt 7 G.I. Pipe 6Dia 8 Aluminium Tape 9 11 KV Pilfer Proof Metering Cubical 10 Part-B (Erection work)Cartiage of11 KV XLPE 3x185 sqmm & 11 KV XLPE 3x120 sqmmfrom store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.) 11 Cartiage of 11 KV VCB I/C CTR 600/300/5 A, 350 MVA 24 Volt, 11 KV VCB O/G 200/100/5 A, 350 MVA from store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.) 12 Cartiage ofST Pole 11 Mtr from store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.) 13 Cartiage ofPCC Pole 8.5 Mtr.from store center agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.) 14 Cartiage of Line Material from Store Center Agra to work of site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)Line material viz. Aerial bunch conductor/Weasal conductor/Dog/ Rabbit, G.I. earth wire, cross arm, angle, channel, insulators,clamps, Dist. Box, and other line material, if required in Estimate/Package. 15 Erection and grouting in 1:2:4 ratio (cement, sand and bricks balast) on Single Pole 11 Mtr. long ST poles including fixing ofall accessories for 11 KV line as per RESPO norms.Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost. 16 Erection and grouting in 1:2:4 ratio (cement, sand and bricks balast) on Double Pole 11 Mtr. long ST poles including fixing ofall accessories for 11 KV line as per RESPO norms.Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost. 17 Erection and grouting in 1:2:4 ratio (cement, sand and bricks balast) on Single Pole 8.5 Mtr. Long PCC including fixing ofall accessories for 11 KV line as per RESPO norms.Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost. 18 Laying sagging stringing and binding and jumperingofACSR Weasel Conductor at 11 KV/LT lineas per RESPO norms It includes the cost of labour, T & P carrier etc required for proper completion of work. 19 Laying sagging stringing and binding and jumperingofACSRDog Conductor at 11 KV/LT lineas per RESPO norms It includes the cost of labour, T & P carrier etc required for proper completion of work. 20 Erection and grouting stay of ratio 1:2:4 (cement, sand and bricks balast) as per RESPO norms including the costof arrangement of labour, T&P, carrier etc. required for proper completion of work. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 21 Fixing of earthing rod as per RESPO norms including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work. 22 Fixing ofP.G. Clamps as per RESPO norms 23 Fixing of Danger Boards(shock Proof, Rust Proofs) on Poles as per RESPO norms. 24 Fixing of Number plates on Poles as per RESPO norms. 25 Filling of 11KV 3x120/185 sqmm Indoor/Outdoor Jointing Kit and making connection as per direction of supervising engineer. 26 Installation & Commissoning of 11 KV VCB I/C CTR 600/300/5 A, 350 MVA 24 Voltproper alignment and direction and jointing of earthing strips with help of gas welding and making cable connection including shifting dragging with all other associated works. 27 Installation & Commissoning of 11 KV VCB O/G 200/100/5 A, 350 MVAproper alignment and direction and jointing of earthing strips with help of gas welding and making cable connection including shifting dragging with all other associated works. 28 Fixing of Stone Pad as per RESPO Manual Labour, T &P and carriageetcand other associated works to complete the work. All work shall be born by the contractor at his own cost. 29 Fixing ofBolt & Nut of various sizes as per RESPO Manual Labour, T &P and carriageetcand other associated works to complete the work. All work shall be born by the contractor at his own cost. 30 Laying of 11 KV 3x185 sqmm XLPE cable (Double Circuit i.e 600x2=1200 Mtr) due to Road crossing by drill machine/H.D.D. Machineincluding the cost of arrangment of labour, T&P & Drill mchine/H.D.D. machine at a depth of 1.0 mtr. Below the ground level. 31 Hoisting and Stringing 11 KV 3x120 sqmm XLPE overhead cable with 6 Dia G.I. Pipe includes unroling cutting / megaring & sealing both ends as per Norms. 32 Laying of 11 KV 3x185 sqmm XLPE cable in trenchwith making loop (at a distance of approx. 4 mtr.) laying of bricks (18 nos. in one meter), filling of sand in trench then laying earth and its levelling and rammuring etc., complete work as RESSPO norms. 33 Installation of 11 KV Pilfer Proof Metering Cubical & Making connection as per RESPO Norms or Direction by supervising Engineer.
