Tender For Supply Of Material , Bourdon Sensing Pressure Gauge Range: 0-6 Kg/Cm2#Bottom Entry, Direct Mounting #Process Fitting Size 1/4-19 Bsp# Thread Size :15 Mm X 1.5 Mm #Dial : 100Mm Nominal Dia, White Background, Black Markings .#Case Material : Ss316.#Protection Class : Ip67.#Gaske Rene# Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket .#Socket : Ss316, Single Piece Bar Stock. #Movement Ss316#Connection : 1/4# Bsp (M)#Zero Adjustment With Internal Micrometer Pointer #Blow Out Disc : Provided (On Tase), Neoprene# Window : Shatterproof Glass (4Mm Thick)/ Toughened Glass (Duly Printed On Glass, 3 Mm Thick)# , Bourdon Sensing Pressure Gauge Range: 0-16 Kg/Cm2#Bottom Entry, Direct Mounting #Process Fitting Size 1/4-19 Bsp# Thread Size -15 Mm X 1.5 Mm #Dial : 100 Mm Nominal Dia, White Background, Black Markings .#Case Material : Ss316.#Protection Class : Ip67.#Gas Oprene# Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket. #Socket : Ss316, Single Piece Bar Stock.# Movement : S316#Connection : 1/4# Bsp (M)#Zero Adjustment With Internal Micrometer Pointer #Blow Out Disc : Provided (On Case), Neoprene #Window : Shatterproof Glass (4Mm Thick)/ Toughened Glass (Duly Printed On Glass, 3 Mm Thick)## , Bourden Sensing Press. Gauge, :0-10Kg/Cm²#Bottom Entry, Direct Mounting #Process Fitting Size : 3/8-19 Bsp# Thread Size : 15 Mm X 1.5 Mm# Dial : 100 Mm Nominal Dia, White Background, Black Markings .#Case Material : Ss 316.#Protection Class : Ip67.#Gasket : Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket. #Socket : Ss316, Single Piece Bar Stock .#Movement : Ss316#Zero Adjustment With Internal Micrometer Pointer #Blow Out Disc : Provided (Ontop Of Case), Neoprene #Window : R Proof Glass (4Mm Thick)/ Toughened Glass (Duly Printed On Glass, 3 Mm Thick# , Diaphragm Type Pressure Gauge# Range : 0 To 16 Kg/Cm# Bottom Entry, Direct Mounting #Process Fitting Size 1/2-14 Npt# Thread Size : 15 Mm X 1.5 Mm# Type Diaphragm Sensing# Mounting Bottom Entry, Direct Mounting. #Dial Size :150 Mm With White Back Ground Black .#Case/Chamber Ss 304#Zero Adjustment With Internal Micrometer Pointer# Window : Shatterproof Glass 4Mm Thick## , Diaphragm Pressure Gauge Dial: (150 Mm) Dial Type: Sealed Unit Diaphragm Pressure Gauge, Mounting:1/2 Npt Bottom Connection Direct Mounting, Case & Bezel & Movement: Ss304, Wetted Parts: Ss316, Zero Reset: Internal, Protection: Ip 67 Type: Dry, Diaphragm Sealed, Silicon Fluid With 1 Nb Flange, Teflon Coated, Range: 0 To 15000 Mmwcl# , Diaphragm Pressure Gauge Dial: (100 Mm) Dial, Type: Diaphragm Pg Mounting: Bottom Connection Direct Mounting, Case & Bezel & Movement: Ss304, Wetted Parts: Ss316 Zero Reset: Internal Protection: Ip 66, Type: Dry Connection: 1/2 Npt (M), Range: -1 To +L K /Cm2# , Diaphragm Type Pressure Gauge Model Pcbg Case Dial 100Mm Range :- 0To 6 Kg/Cm2 ,#Thread Size : 15 Mm X 1.5 Mm# Thread Size:1/2 Npt#Type : Diaphragm Sensing# Mounting Bottom Entry, Direct Mounting. #Dial Size 100 Mm With White Back Ground Black Marking .#Case R Ss 304/ Ss 316#Diaphragm Ss 316#Connection : ½# Npt (M)#Zero Adjustment With Internal Micrometer Pointer# Window : Shatterproof Glass 4Mm Thick## , All Ss Pressure Gauge# Panel Mounting(Back Entry)#Process Fitting Size 1/2 Npt# Thread Size - 20 Mm X 1.5 Mm# Range: 0-16 Kg/Cm2#Dial :150Mm Nominal Dia, White Background, Black Markings. #Case Material : Ss 316.#Protection Class : Ip67.#Gasket : Neoprene #B S316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket.# Socket : Ss316, Single Piece Bar Stock.# Movement : Ss316#Zero Adjustment With Internal Micrometer Pointer #Blow Out Disc : Provided (On Top Of Case), Neoprene #Window : Shatterproof 4Mm Thick# , All Ss Pressure Gauge Model Pcbg Case Dia 120Mm#Range 0 To 40 Kg/Cm2#Bottom Entry, Direct Mounting #Process Fitting Size 3/8-19 Bsp# Thread Size - 15 Mm X 1.5 Mm #Range: 0-40 Kg/Cm2#Dial : 120,Mm Nominal Dia, White Background, Black Markings. #Case Material 6.#Protection Class : Ip67.#Gasket : Neoprene #Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket. #Socket : Ss316, Single Piece Bar Stock.# Movement : Ss3#Accuracy : +/- I% Fsd (Duly Mentioned On Dial)#Overrange : 125% Fs Just Ment With Internal Micrometer Pointer #Blow Out Disc : Provided (On Top Of Case), Neoprene# Window : Shatterproof Glass 4Mm Thick# , Bourden Sensing Pressure Gauge Range:- 0-25 Kg/Cm2# Back Entry, Panel Mounting Process Fitting Size 1/2 Npt(M)#Thread Size - 20 Mm X 1.5 Mm #Dial : 150Mm Mm Nominal Dia, White Background, Black Markings .#Case Material : Ss 316.#Protection Class : Ip67.#G Neoprene #Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket.# Socket : Ss316, Single Piece Bar Stock. #Movement : Ss31#Zero Adjustment With Internal Micrometer Pointer #Blow Out Disc : Provided (On Top Of Case), Neoprene# : Shatterproof Glass 4Mm Thick## , Bourden Sensing Pressure Gauge(0-1Kg),#Panel Mounting,1/2Npt(M)# Back Entry , Panel Mounting , Process Fitting Size 1/2 Npt(M)#Thread Size - 20 Mm X 1.5 Mm# Dial : 100 ,Nominal Dia, White Background, Black Markings. #Case Material : Ss 316.#Protection Cl 67.#Gasket : Neoprene# Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket. #Socket : Ss316, Single Piece Bar Stock.# Movement : Ss316#Zero Adjustment With Internal Micrometer Pointer# Blow Out Disc : Provided (On Top Of Cas Prene# Window : Shatterproof Glass 4Mm Thick## , Bourden Sensing Pressure Gauge #Range 0-4 Kg/Cm2# Back Entry , Panel Mounting , Process Fitting Size 1/2 Npt(M)#Thread Size - 20 Mm X 1.5 Mm# Dial : 100 Mm Inal Dia, White Background, Black Markings .#Case Material : Ss 316.#Protection Class :Ip67.#Gasket Ene# Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annealed After Welding With Socket.# Socket : Ss316,Single Piece Bar Stock.# Movement : Ss316#Accuracy : +/- I% Fsd (Duly Mentioned On Dial)#Overrange : 125% Fsd# Zero Adjustment With Internal Micrometer# Blow Out Disc : Provided (On Top Of Case), Neoprene #Window : Shatterproof Glass 4Mmthick## , Chemical Sealed Diaphragm Pressure Gauge (Hsn 9026) Model: Pcbg, Dial: 6 (150 Mm) Dial, Type: Chemical Sealed Diaphragm Pg Mounting: Bottom Connection Direct Mounting, Case & Bezel & Movement: Ss304, Wetted Parts: Ss316 Zero Reset: Internal Protection: I 66, Type: Dry, Connection: 1/2 Npt {M), Range: 0 To 16 Kg/Cm2 / 0 To 230 Psi (Dual Scale) , Diaphragm Type Pressure Gauge# Range 0 To 25 Kg/Cm2#Type Diaphragm Sensing #Mounting Bottom Entry, Direct Mounting .#Dial Size ;150 Mm With White Back Ground Black Marking. #Case/Chamber Ss 304/ Ss 316#Diaphragm Ss 316#Connection : ½# Npt(M)#Zero Adjustment Rnal Micrometer Pointer# Window : Shatterproof Glass 4Mm Thick# , Diaphragm Type Pressure Gauge #Range 0 To 2500 Mmwcl# Type Diaphragm Sensing #Mounting Bottom Entry, Direct Mounting. #Dial Size :150 Mm With White Back Ground Black Marking. #Case/Chamber Ss 304/ Ss 316#Diaphragm Ss316#Connection : ½# Npt (M)#Zero Adjustment Rnal Micrometer Pointer# Window Shatterproof Glass 4Mm Thick# , Bourden Sensing Pressure Gauge(0-4Kg),150Mm,# Bottem Entry, 1/2 Npt(M)#Dial : 150 Mm Inal Dia, White Background, Black Markings. #Case Material : Ss 316.#Protection Class : Ip67.#Gasket : Neoprene# Bourdon : Ss316 Ti/Ss316l, Seamless Pipe Only, Duly Annea Er Welding With Socket.# Socket : Ss316, Single Piece Bar Stock #Zero Adjustment With Internal Micrometer Pointer #Blow Out Disc : Provided (On Top Of Case), Neoprene #Window : Shatterproof Glass 4Mm Thick## , Diaphragm Type Pressure Gauge# Range :-100 To 300 Mmwcl # Type Diaphragm Sensing #Mounting Bottom Entry, Direct Mounting.# Dial Size :150 Mm With White Back Ground Black Marking# Case/Chamber Ss 304/ Ss 316#Diaphragm Ss316#Connection : ½# Npt (M)#Zero Adjustme Nternal Micrometer Pointer# Window : Shatterproof Glass 4Mm Thick# , Diaphragm Pressure Gauge 150 Mm Dial, Type: Diaphragm Pg Mounting: Back Mounting ,Pannel Mounting Connection Direct Mounting, Case & Bezel & Movement: Ss304, Wetted Parts: Ss316 Zero Reset: Internal Protection: Ip 66, Type: Dry Connection: 1/2 Npt (M), R Nge: -1 To +L Kg/Cm2# , Sr.No .:01201Copper Constantan(T-Type).# Thermocouple Duplex Copper # Constantan As Per Din Standard , The Wire Shall Be Drawn In Mineral Insulated Ss-316 Capillary Of 6Mm Od# Thermocouple Element Dia 1.2 Mm# Thermocouple Length(A) Overall Length = 750 Mm,# Extension Length = 150 Mm# (C) Immersion Length = 600 Mm# Material Of Thermocouple Sheath (Thermo Well) (C)## Extension Length: Aisi 304# (D)## Immersion Length: Special Metal As Per Our Process Requirement. #Connecting Head, Made Out Of Cast Aluminum (Alum ) With Ceramic Terminal Board Assembly With Marked Polarity And With Ss 316 Screw & Connectors. The Head Will Have Two Entries With Double Compression Ss Cable Glands And Top Cover Will Be Hinge Type / Thread Type# Thermocouple Junction, Ungrounded# .#Ther Uple Sheath Dia, 7/8# Or Equivalent Astm Standard #Id Of Thermocouple Sheath 8 Mm# Flange Details, Suitable For Bhel Boiler# 01 No. Fixed Flange Of Following Details:-# Od Of Flange = 90 Mm# No. Of Holes = 6 Nos.# Hole Dia = 7Mm# Pcd = 68 Mm##Process Media, Ir Inlet & Pa Flow Temp. Comp. To Bowl Mills# Process Pressure = 800 Mmwcl ,# Process Temp. = 350 0C# , Thermocouple Duplex Copper # Constantan As Per Din Standard , The Wire Shall Be Drawn In Mineral Insulated Ss-316 Capillary Of 6Mm Od# Thermocouple Element Dia =1.2 Mm# Thermocouple Length#(A) Overall Length = 310 Mm,#(B) Extension Length = 150 Mm#C) Immers Ngth = 160 Mm# Material Of Thermocouple Sheath (Thermo Well)# (A)## Extension Length: = Aisi 304# (B)## Immersion Length: Complete Solid Sintered Tungsten Carbide Thermo Well.# Connecting Head, Made Out Of Cast Aluminum (Alumina-4) With Ceramic Terminal Boa Sembly With Marked Polarity And With Ss 316 Screw & Connectors. The Head Will Have Two Entries With Double Compression Ss Cable Glands And Top Cover Will Be Hinge Type / Thread Type# Thermocouple Junction, Ungrounded# Response Time Without Sheath 4 Sec.#Re Se Time With Sheath 10 Sec.# Thermocouple Sheath Dia, 21 Mm#Id Ofthermocouple Sheath 8 Mm# Process Connection M 33 X 2 Mm# Washer, 01 No. Copper Washer Duly Temped Of Following Size# Od X Id X T = 50 Mm X 30 Mm X 6 Mm# Instrument Class Of Protection Ip-65#Pr Dia, Coal Air Mixture Temperature Measurement Installed At The Top Of Bowl Mill,# Max. Pressure = 500 Mmwcl, Max. Temp. = 150 0C#Process Content The Thermo Well Should Withstand In The Very High Friction Condition Of Pulverized Coal Having 0.2% Sulpher, S , Prt-100 Duplex Cw Inlet/Outlet Tempratures Rtd 2 X Pt 100, Duplex, 3-Wire System ,#As Per Sample,Lenghth-800Mm#(For Cw Inlet/Outlet Tempratures)# Prt-100 Duplex Rtd 2 X Pt 100, Duplex, 3-Wire System,# As Per Sample,Length-200Mm,Thread Size-M33x2.0#(For Ah Guide & Support Brg)# , Prt-100 R Td 2 X Pt 100, Duplex, 3-Wire System, As Per Sample, Thread Size-M33x2.0#(For Working Oil Temp Bfp ) , Prt-100 R Td 2 X Pt 100, Duplex, 3-Wire System, As Per Sample, Thread Size-M33x2.0#(For Working Oil Temp Bfp ) , T/C Duplex K Type Thermocouple Length# Thermocouple Duplex Chromel - Alumel As Per As Per Din Standard, In Mineral Insulated Ss-316 Capillary Of Dia 6 Mm# Thermocouple Element Dia 0.56 Mm# Thermocouple Length 16 Mtr.#Material Of Thermocouple This Is Surface Of Couple For Measurement Of Metal Temp. Head And Pad Suitable To Be Welded On The Process Pipe And On Whose Hole Capillary Can Be Suited And Tightened Properly. Pad Material Ss-304 Or 316.#Connecting Head, ¼# Npt X 6 Mm Bore Through Connector Cs Along With He Connector Tb Or Some Other Suitable Facility. #Thermocouple Junction, Ungrounded# Response Time Without Sheath 4 Sec. #Instrument Class Of Protection Ip-65#Process Media, Capillary Is To Be Installed For The Measurement Of Sh/Rh Tube Metal Temp., Drum Me Emp., Metal Temp At Down Steam Hp Bypass Valve# Media Temp. Up To = 800 Dgree# Measured Temp. Range = 0 - 600 Dgree# Zone Pressure = 50 Mmwcl# Process Contents The Capillary Should With Stand In Pent House (Sh &Rh Zone) Temp. And Pressure Condition.# Guaran Terial Shall Be Guaranteed For A Period Of 2 Years Continues Performance.# , T/C Duplex K Type Thermocouple Length#(Thermocouple Duplex Chromel - Alumel As Per As Per Din Standard, In Mineral Insulated Ss-316 Capillary Of Dia 6Mm Or The Element, The Wire Shall Be Drawn High Alumina Ceramic Beads Having 4 Hole, Of 10 Mm Dia And 25 Length.# Thermocouple Element Dia 0.56 Mm# Thermocouple Length (A) Overall Length = 16000 Mm.# (B) Extension Length = 15800 Mm# (C) Immersion Length = 200 Mm #Material Of Thermocouple Sheath (Thermo Well) (A)## Extension Length: Specification Metal As Per R Ment Of Our Process To Mount To It Pent House Zone Of Heater# (B)## Immersion Length: = Ss 316.#Connecting Head, Made Out Of Cast Aluminum (Alumina-4) With Ceramic Terminal Board Assembly With Marked Polarity And With Ss 316 Screw & Connectors. The Head W Have Two Entries With Double Compression Ss Cable Glands And Top Cover Will Be Hinge Type / Thread Type# Thermocouple Junction, Ungrounded# Response Time Without Sheath 4 Sec.# Response Time With Sheath 10 Sec.# Thermocouple Sheath Dia, 7/8# Or Equivalent A Standard, Tapered From 28Mm.#Id Of Thermocouple Sheath 7 Mm #Process Connection M 33 X 2 Mm# Washer, 01 No. Copper Washer Duly Temped Of Following Size# (A) Od X Id X T = 50 Mm X 30 Mm X 6 Mm# Instrument Class Of Protection Ip-65#Process Media, (A)## Sheath I , Temp. Gauge# Capillary : Ss 304 Length 6 Meter# Range : 0-120 C#Connection : 1/2 Bsp Having Adjustable Head# Stem Dia. : 12 Mm# Stem Length : 32 Mm# Dial Size : 150 Mm# Case Material : Ss304 Ss 304 And Adjustable Up & Down With 45°.#Stem Material: Ss316 #Acc Of Fsd# Over Load : 130 % Of Fsd,# Instrument Protection Class - Ip66#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness. , Gas Filled Temp Gauge# Range : 0 To 100 Deg C# Dial Size : 150Mm#Stem Dia : 8 Mm# Stem Length : 25 Mm# Connection : 1/4 Bsp With Adjustable Head# Capillary : Ss 304 Length 3 Meter# Case Material : Ss304 And Adjustable Up & Down With 45°.#Stem Material : Ss316# 1% Of Fsd# Over Load : 130 % Of Fsd,# Instrument Protection Class - Ip66#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness. , Gas Filled Angle Type Temp Gauge For Lube Oil Lines Turbine & Mills# Dial- 150Mm With White Back Ground Black Marking# Range 0 To 100°C#Stem Dia - 10 Mm# Stem Length- 300 Mm With Adjustable Socket Having Thread Size Npt 3/4-14#Stem Material- Ss 316#Accuracy Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- Ip67#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness. , Temperature Gauge For Cep Having Following Specification# Range -0 To 120°C#Dial-150 Mm With White Back Ground Black Marking# Capillary Size- 3 Meter# Capillary Material-Ss 304 Covered With Ss Conduit# Stem Dia-10 Mm# Stem Size -180 Mm Having Adjustable Head Weed Size Bsp 3/4-14#Stem Material- Ss 316#Accuracy: 1% Of Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304#Protection- Ip67#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness. , Gas Filled Angle Type Temp Gauge For Bfp Booster Pump & Mills Having Following Specification# Dial- 150Mm#Range 0 To 100°C#Stem Dia- 8 Mm# Stem Length- 300 Mm# Bulb Size- 40Mm With Adjustable Socket Having Thread Size Npt 3/4-14#Stem Material- Ss 316#Accura F Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- P67#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness , Gas Filled Temperature Gauge For Mechanical Seal Cooler Having Following Specification Specification # Dial- 150 Mm With White Back Ground Black Marking# Range 0 To 120°C#Stem Dia-10 Mm# Stem Length- 100 Mm# Capillary Size- 1 Meter# Capillary Material-Ss 304 D With Ss Conduit# Bulb Size- 40Mm With Adjustable Socket Having Thread Size Npt 1/2-14#Stem Material- Ss 316#Accuracy: 1% Of Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- Ip67#Zero Adjustment With Interometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness , Gas Filled Temperature Gauge For Main Pump Of Bfp Having Following Specification -#Dial- 150Mm Mm With White Back Ground Black Marking# Range 0 To 200°C#Stem Dia-10 Mm# Stem Length- 140 Mm# Capillary Size- 1 Meter# Capillary Material-Ss 304 Covered With Ss Co Lb Size- 40 Mm With Adjustable Socket Having Thread Size Npt 3/4-14#Stem Material- Ss 316#Accuracy: 1% Of Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- Ip67# Zero Adjustment- With Internal Micrometer Poi Down With Shattered Proof Glass Having 3 Mm Thickness , Gas Filled Angle Type Temp Gauge For Bfps Suction & Discharge Feed Water# Dial- 150 Mm With White Back Ground Black Marking# Range 0 To 200°C#Stem Dia- 8 Mm# Stem Length- 200 Mm# Bulb Size- 40 Mm With Adjustable Socket Having Thread Size Npt 3/4-14#Stem Mat Ss 316#Accuracy: 1% Of Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- Ip67#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness , Gas Filled Temperature Gauge For Id,Fd,Pa & Ah Lops Having Following Specification-#Dial- 100 Mm With White Back Ground Black Marking# Range 0 To 100°C#Stem Dia- 10 Mm# Stem Length- 185 Mm With Adjustable Socket Having Thread Size Npt 3/4-14#Stem Material- 6#Accuracy: 1% Of Fsd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- Ip67#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness , Gas Filled Temperature Gauge For Mot Having Following Specification# Dial- 150 Mm With White Back Ground Black Marking# Range 0 To 100°C#Stem Dia- 6 Mm# Stem Length- 185 Mm With Adjustable Socket Having Thread Size Npt 3/4-14#Stem Material- Ss 316#Accuracy: Sd# Over Load: 130 % Of Fsd,# Case Material: Ss 304 And Adjustable Up & Down With 45°.#Protection- Ip67#Zero Adjustment- With Internal Micrometer Pointer# Window With Shattered Proof Glass Having 3 Mm Thickness
