Gated Bandhara No.4 Malewadi Tq. Parli. Dist. Beed. - Item No.1. Excavation in all kinds of Soils and Soft Murum including boulders upto 0.60 m diameter (0.113cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directedincluding cost of all materials , machinery,labour, dressing bed and sides to required level and profile etc.,complete with lead15 mand lift.as directed . 2 Item No 2 .Excavation in Hard murum including boulders up to 0.60 m diameter (0.113 cum) for canal, seating of embankment, filter drains/ catch water drains etc. and placing the excavated stuff neatly in dump area or for formation of service road / embankment includingcost of all materials ,machinery, labour , dressing bed and sides to required level and profile etc. complete with Lead 15 m and all lifts as directed.. 3 Item No.3 :- Excavation in soft rock without blasting including boulders upto 0.60 m diameter ( 0.113 cum ) for canal, seating of embankment, filter drains/ catch water drains etc. and placing the excavated soft rockneatly in dump area or for formation of service road including cost of all materials , machinery, labour , dressing bed and sides to required level and profile etc. complete with Lead 15 m andall lifts as directed.. 4 Item No.4 :- Providing and Fixing in position TMB FE500 barrein forcement of Various diameters for RCC pille caps, footings foundations, slabs, beam , coloumns, canopies, staircase, newels, chajjas, lintels, pardis, copings fins, arches, etc.as per detailed drawing and shedules, including cutting , bending, hooking the bars , bindings with wires or tack welding and supporting as required complete as directed... 5 ItemNo.5 :- Providing & laying in situ Cement concrete of grade M-15 of trap / granite / quartzite/ gradedmetal for PCC with or without surface reinforcemnet / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice spilway crest, spilway downstream face, energy dissipating ,structures, intake structures, training walls, picers, abutments etc. with concrete mixer with shuttering and scaffolding, placing compacting, curingwith an initial lead of 1 km & all lift etc Complete as directed.. 6 Item No. 6 :- Providing and fixing in position M.S. SILL BEAM ISWB 150 x 100 mm size as per detailed design & drawing including one coat of anticorrosive paint with two coats of oil paint etc.Complete all leads and lifts as per specification. 7 Item No. 7 :- Providing and fixing in position M.S.CHANNEL of size 150mm X 100mm , fabricated from8 mm plate including fabrication with 12 mm dia, hooks of 50 cm in length including one coat of anticorrosive paint with two coats of oil paint etc.Complete all leads and lifts as per drawings. 8 Item No. 8 :- Manufacturing with QAP & fabrication of KT weir needle gates - staight type size 2.12 X 0.50 M - 98 kg weight as per relevant Indian standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinary charges, 1 km lead charges of Gate parts at site, Inspection & Quality control charges, Sand blasting, Painting with one coat of zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and two coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150 +/- 5 microns per coats as per IS 14177. 9 Item No. 6. Back filling up to ground level behind the structure etc complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed. 10 Item No.10. Excavation of Nalla Regardation and deepening in all types of Strata etc. 11 Item No. 12. :- Providing & Fixing Information Board of 1.2 x 0.75 m prepared on 16 guage M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white background and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer - in - charge.
