}

Operation Maintenance Of Cpws Scheme To Gullapadu, Malleswaram Sivapuram Of Chintalapudi Mandal For The Year 2024-2025 (System Staff Repairs Consumables) Est Cost Rs.12.20 Lakhs, ELURU-Andhra Pradesh

Government Departments has published Operation Maintenance Of Cpws Scheme To Gullapadu, Malleswaram Sivapuram Of Chintalapudi Mandal For The Year 2024-2025 (System Staff Repairs Consumables) Est Cost Rs.12.20 Lakhs. Submission Date for this Tender is 07-10-2024. Water Supply Project Tenders in ELURU Andhra Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

45513686
Operation Maintenance Of Cpws Scheme To Gullapadu, Malleswaram Sivapuram Of Chintalapudi Mandal For The Year 2024-2025 (System Staff Repairs Consumables) Est Cost Rs.12.20 Lakhs
Open Tender
Indian
Andhra Pradesh
Eluru
07-10-2024

Tender Details

operation maintenance Of Cpws Scheme To Gullapadu, Malleswaram Sivapuram Of Chintalapudi Mandal For The Year 2024-2025 (System Staff Repairs Consumables) Est Cost Rs.12.20 Lakhs-57803.63 Operation and Maintenance of Multi Village Scheme for Supply of potable (chlorinated) drinking water at the specified quantity as per drinking water quality standards to all the habitations mentioned in the schedule through the existing network system comprising of infrastructure viz. RSF, OHBR, , Service Reservoirs i.e. OHSRs, GLSRs etc., including all operating expenses like wages to the system staff and other amenities applicable as per the labour act, Mobility/transportation facilities etc., for the designated qualified Pump operators, Electricians, Fitters, Helpers, Watchmen etc. for carrying out of all operations involved in drawing of raw water from source, treatment and supply of drinking water as per the guidelines of CPHEEO manual / Department at the rate of 40 LPCD with relevant IS specifications wherever applicable and with highest quality standards. The scope of work also includes routine, periodic, breakdown and preventive maintenance, staffing and engaging manpower under Operation & Maintenance. The turbidity of supplied water shall be maintained below 1 NTU and should not exceed 5NTU by mixing alum in raw water duly arriving the Alum dosage by jar test. Disinfection with Bleaching Powder / Liquid Chlorine / Gas Chlorination shall be taken up to maintain Residual Chlorine not less than 0.2ppm in pipe lines at last FHTC in the tail end habitations. The scope of work includes taking up of all other incidental activities pertaining to the Operation and Maintenance of MVS and to follow all standard procedures by the agency as directed by the Employer / Engineer of the department. The Rate per KL is applicable to supply potable (chlorinated) drinking water by engaging system staff for Operation & Maintenance of said MVS (The rate is excluding cost of consumables, power consumption charges, Repairs and Renewals and GST).For all 0 to 5 MLD, 5 to 25 MLD, 25 to 50 MLD , 50 to 100 MLD and Sources having large dia High yielding tube wells (Annexure is enclosed for the System staff.)(Population x LPCD X 243/1000) from 01.08.2024 to 31.03.2025=243 Days 2289.00 Supply, Delivery and staking of Sodium Hypo Chlorite Solution (Grade-) Available Chlorine (as CI) Present Mass by Volume (Liquid Chlorin) as per I>s 11673-1992 including cost of material, Conveyance, stacking at the location specified by the Department and all taxes, duties and lveies etc.,complete., (Liquid Chlorin may be adopted as per District Lvel Purchase Committee approved rate) Dosage :40 Ml/1000 LitsPopulation X LPCD X 243 Days X40 Ml/1000)/ 103)= Lits 4.00 Manufacture, Supply, Delivery of HDPE pipes confirming to IS 4984-2016 including trasnporation to anywhere in AP, excluding all taxes (Supply upto 90 mm dia in Coil & above 90 mm dia. Straight length) (As per SOR & Monthly approved JUNE Resin Rates)160mm dia HDPE Pipes 6 Kg/Cm2 6.00 Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. ( As per SOR & Monthly JUNE approved Resin Rates)90mm dia PVC Pipes 6 Kg/Cm2 4.00 Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. ( As per SOR & Monthly JUNE approved Resin Rates)160mm dia PVC Pipes 6 Kg/Cm2 8.00 Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. ( As per SOR & Monthly JUNE approved Resin Rates)200mm dia PVC Pipes 6 Kg/Cm2 3.00 Labour Charges for leakage in PVC Pipe line of following diameter of different places including necessary excavation manually or by machinery, dewatering, removing of mud, cleaning of pipe nd leakage portion, cutting the pipe line, jointing & replacing using CID joint including CID Joint inclusive of using all required machinery, lobour, D.G set, fuel, operator, CID Joints, rubber rings, nuts bolts etc complete(but excluding cost of Pipe) As per Annexure - I&II90mm dia PVC Pipes 6 Kg/Cm2 1.00 Labour Charges for leakage in PVC Pipe line of following diameter of different places including necessary excavation manually or by machinery, dewatering, removing of mud, cleaning of pipe nd leakage portion, cutting the pipe line, jointing & replacing using CID joint including CID Joint inclusive of using all required machinery, lobour, D.G set, fuel, operator, CID Joints, rubber rings, nuts bolts etc complete(but excluding cost of Pipe) As per Annexure - I&II160mm dia PVC Pipes 6 Kg/Cm2 2.00 Labour Charges for leakage in PVC Pipe line of following diameter of different places including necessary excavation manually or by machinery, dewatering, removing of mud, cleaning of pipe nd leakage portion, cutting the pipe line, jointing & replacing using CID joint including CID Joint inclusive of using all required machinery, lobour, D.G set, fuel, operator, CID Joints, rubber rings, nuts bolts etc complete(but excluding cost of Pipe) As per Annexure - I&II200mm dia PVC Pipes 6 Kg/Cm2 1.00 Labour Charges for leakage in HDPE Pipe line of following diameter of different places including necessary excavation manually or by machinery, dewatering, removing of mud, cleaning of pipe nd leakage portion, cutting the pipe line, jointing & replacing using CID joint including CID Joint inclusive of using all required machinery, lobour, D.G set, fuel, operator, CID Joints, rubber rings, nuts bolts etc complete(but excluding cost of Pipe) As per Annexure - I&II160mm dia HDPE Pipes 6 Kg/Cm2 90.00 Supply and Transportation of XLPE/PV insulated & PVC shealthed amoured cables of 1.1 KV grade with copper conductor 2C x 10 Sqmm as per iS 7098 Part-1 -1988 etc., completed Makes : as per list of recommended brands 2.00 Tamper Proof DI Flanged Single Chamber Air Release Valve with Body and cover made of Ductile Iron Grade GGG-40/SG-400/15 or GGG-50/SG-500/7 or Equivalent as per IS1865, IS:3896-2 with Food Grade Epoxy Powder Coating(EP-P) (Min:250 Micron) inside and Outside of Color Blue RAL 5005 and subsequent revisions As per Annexure - VII50 mm Dia DI Air Valve PN 1.6 on 125 MM to 225 MM Dia HDPE Line (6 Nos) 140mm Line 1.00 Rewinding of three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire E class insulation material and testing etc. as required. ( As per Building SOR - ELEC- 5.9.14 )5.0 H.P 2.00 Rewinding of three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire E class insulation material and testing etc. as required. ( As per Building SOR - ELEC- 5.9.14 )12.50 H.P 1.00 Rewinding of three phase motor of 1400 to 2800 RPM including all necessary material and of the same characteristics as original with required size of super enameled wire E class insulation material and testing etc. as required. ( As per Building SOR - ELEC- 5.9.14 )15.0 H.P 801.12 Labour charges for cleaning of sumps/GLBR including cleaning and removal of algae,calcinations,sludge, dirt deposition from side walls and bottom portion of the container by disinfection with bleaching powder with all necessary tools, plants labour charges and cost of disinfectant etc. As per Approved Data (Annexure - VIII) Shall not exceed 4 times SUMPS 1037.28 Labour charges for cleaning of sumps/GLBR including cleaning and removal of algae,calcinations,sludge, dirt deposition from side walls and bottom portion of the container by disinfection with bleaching powder with all necessary tools, plants labour charges and cost of disinfectant etc. As per Approved Data (Annexure - VIII) Shall not exceed 4 times 120 KL Dome Slab Endapalli 861.44 Labour charges for cleaning of sumps/GLBR including cleaning and removal of algae,calcinations,sludge, dirt deposition from side walls and bottom portion of the container by disinfection with bleaching powder with all necessary tools, plants labour charges and cost of disinfectant etc. As per Approved Data (Annexure - VIII) Shall not exceed 4 times 90 KL Dome Slab Sivapuram 10.00 Cost Supply of Capacitors ( As per Approved Data ((Annexure - IX) 90.00 Drilling of Bore Well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc., and drilling in over burden to dia not less than 200 mm etc., and reaming the bore well to suit insertion of suitables casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including ransportation of drilling rings and suppporting vehicle and including bore development (Furnishing of Bore well at an average pressure of 150 PSI) Conducting yield test, consumbles charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work shoud be carried out as per IS-2800 Part-I & II 1979 and amended from time to time.Depth of Bore well in soil upto 90 Mts 20.00 Drilling of Bore Well by down the hole hammer drilling to a finished dia of 112/165 mm dia in all formations suitable for down the hole hammer drilling such as medium hard rock formation to hard rock formation, all consolidated formation etc., and drilling in over burden to dia not less than 200 mm etc., and reaming the bore well to suit insertion of suitables casing pipe etc., including insertion of casing pipe with couplings, caps any other relevant materials upto required depth as directed by the department including ransportation of drilling rings and suppporting vehicle and including bore development (Furnishing of Bore well at an average pressure of 150 PSI) Conducting yield test, consumbles charges, Crew charges required in fixation of pipe assembly completely done to the satisfaction of the department and including all labour charges but excluding all taxes, the cost of casing pipe, couplings, cap etc., The entire work shoud be carried out as per IS-2800 Part-I & II 1979 and amended from time to time.Depth of Bore well in soil 90 to 150 Mts 110.00 Cost & Supply of 175 mm dia CM Class PVC Blue threaded Casing pipe including all conveyance charges etc., completed 1.00 Cost and Supply of 175 mm dia MS Clamp set including all conveyance charges etc., completed 1.00 Cost and supply of 175mm dia Bore cap including all conveyance charges etc., completed. 54.00 Slotting charges of 175 mm dia CM Class PVC Blue threaded Casing pipe including all incidental charges etc., complete 1.00 Provision for Geologist survey charges etc., completed.

Key Value

Document Fees
Refer document
EMD
INR 7125.0 /-
Tender Value
INR 7.12 Lakhs /-
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail