Civil Works - Annual Repair and Maintenance of (Internal And External) To Te Bldg At Riico Hindauncity. ; 1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 2 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural resources : 4 graded stone aggregate 20 mm nominal size) derived from natural resources 3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) 5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 6 Kiln seasoned and chemically treated hollock wood/hard wood. 7 30 mm thick shutters 8 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to40 mm thick : 9 Ply wood 5 ply, 9 mm thick : 10 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS1328 BWR Type 11 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 12 250x16 mm 13 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 14 200x10 mm 15 Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 16 125 mm 17 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 18 In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works 19 Providing and fixing on wall face unplasticised Rigid PVC rain water/soil waste pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 20 110 mm diameter 21 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 22 Bend 87.5° 23 110 mm bend 24 Neat cement punning. 25 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : 26 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre 27 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 28 Two or more coats on new work. 29 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 30 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 31 Old work (one or more coats) 32 White washing with lime to give an even shade 33 Old work (two or more coats) . 34 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 35 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 36 One or more coats on old work. 37 Finishing walls with Acrylic Smooth exterior paint of required shade : 38 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). 39 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : 40 With cement mortar 1:4 (1 cement : 4 coarse sand). 41 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 42 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). 43 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 44 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 45 10 litre capacity - White 46 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 47 Semi rigid pipe 48 32 mm dia 49 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 50 Rectangular shape 453x357 mm 51 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 52 20 mm nominal outer dia. Pipes. 53 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 54 25 mm nominal outer dia .Pipes. 55 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 56 Providing and fixing PTMT bib cock of approved quality and colour. 57 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 58 Providing and fixing PTMT stop cock of approved quality and colour. 59 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 60 Providing and fixing PTMT pillar cock of approved quality and colour . 61 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. 62 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 63 25 mm nominal bore, 152 mm long. Weighing not less than 440 gms. 64 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 65 15 mm nominal bore with 45 cm length. 66 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 67 20 mm nominal bore, weighing not less than 40 gms 68 25mm nominal bore. Weighing not less than 62 gms. 69 Cutting holes up to 30x30 cm in walls including making good the same: 70 With common burnt clay F.P.S. (non modular) bricks 71 Engaging beldar as and when required on call basis(whole day) as per requirement and to join the departmental sewer man when single person is not able to attend severe choking complaint, and also may be used in cleaning sweeping of toilet etc.(Acid, bamboo, cleaning rod ,ladder, rope will be provided by the agency.) 72 Repairing of windows shutters by: 73 Cleaning and oiling/greasing with required T&P all complete as per satisfaction of EIC. 74 Providing and welding of Box type hinges for steel windows shutters (50x50 mm) 75 Providing and fixing aluminium sheet in shutters of doors with nails/screws and making smooth in operation all complete as per satisfaction of EIC. 76 Extra for providing and mixing URP of Doctor Fixit in plaster work in proportion recommended by the manufacturers. 77 Providing and fixing CPVC Union in CPVC pipe including cutting and pasting the pipe and making good etc. complete 78 25 mm nominal outer dia .Pipes. 79 Providing and fixing CPVC Gate valve in CPVC pipe including cutting and pasting the pipe and making good etc. complete 80 20 mm nominal outer dia .Pipes. 81 25 mm nominal outer dia .Pipes.
