Tender For Proposal For Partner Empanelment For Supplying Of Furniture Items Arm Chair Type: Net Back Arm Chair with padded Polyurethane Foam seat and PP die-moulded Net Fabric backrest Chair Height: 910 mm Backrest Height: 460 mm Backrest Width: 455 mm (centre) and 400 mm (top) Seat Width: 460 mm Seat Depth: 510 mm (clear size: 410 mm) Seat Height: 465 mm (front) and 420 mm (rear) Attached Armrests: Length 320 mm (end to end), Width 52 mm Frame Material: MS Steel Pipe Material Size: 25 mm diameter, Thickness 1.6 mm Finish: Chrome plated Shoe Type: PVC Seat Material: Hot processed plywood (thickness 12 mm) Polyurethane Foam Density: 25 Kg/Cub. M (thickness 50 mm) Seat Cover Material: Crap cloth Back Cover Material: Net cloth Fabric Color: Black Nos 1100 2 Mid Back Revolving Chairs 360 degree revolving type chair designed with upright position locking and tilt tension adjustment Chair dimensions: 76.3cm (W) x 76.3cm (H) x 85.5-97.5cm (H) Seat height: 42.5-54.5cm Back size: 47.5cm (W) x 58.0cm (H) Seat size: 47cm (W) x 48cm (D) Seat and back made of 1.2+/- 0.2cm thick hot pressed plywood, upholstered with fabric upholstery covers and molded polyurethane foam Back foam designed with contours lumbar support and the seat has extra thick foam on front edge for comfort to popliteal area .High Resilience Polyurethane foam molded with density of 45+/-2 Kg/m3 and hardness load 16+/-2 Kgf as per IS: 7888 for 25% compression One-piece armrests molded from black co-polymer Polypropylene Seat/back tilting ratio: 1:3 Pneumatic height adjustment with an adjustment stroke of 12+/-0.3cm Below: 3 piece telescopic type injection molded in black polypropylene Pedestal: injection molded in black 33% glass filled nylon-66, fitted with 5 twin wheel castors Pedestal dia: 66.3cm+/-0.5cm Twin wheel castors: injection molded in black nylon. Nos 50 3 Glass door almirah /book shelf: Shall be size 916 mm (W) X486 mm(D) X 1981mm(H). It shall have welded construction made of 1 mm thick CRCA for back, Shelf & 1 mm thick CRCA for all other components and shall have steel hinged door. It shall have four full shelves. The finish shall be Epoxy Polyester Powder coated and having anti rust treatment to the thickness of 50 microns (+/-10). All steel structure components shall be processed and made from virgin material. Doors having four window fitted with min 5mm plain glass. Nos 10 4 Japanese Dining Table (Sitting) Dimensions: 48 (length) x 32 (width) x 14 (height) Top material: Black granite with polished edges on all sides 4 legs made from MS ERW tube with dimensions of 40mm x 40mm and thickness of 1.6mm Nos 175 Leg bottom attached with powder-coated MS plate of thickness 3.0mm Legs assembled together with plastic guide at the bottom. 5 *Smart Bunk Beds (Customized with integrated study table, Individual light, charging port, Tubular Fan with attached Cabinet/Almirah) Dimension (approx.): Overall Length Of Bed: 1830 mm, Overall Width Of Bed: 920 mm, Overall Height Of Bed: 1800 mm (with adjusters) With Removable Mosquito Net fixtures in all four corners for both upper and lower bed compartment Structure Of Metal Bed Frame Legs, M.S hollow box square section, Size Of Section 40mm x 40 mm X 1.6 mm thick Support Member For Mattresses M.S hollow box rectangular section of size 40mm x 20 mm X 1.6 mm, Support Members for top rails and stairs in 20 x 20 mm X 1.6 mm thick Mattress Panel With, Material Of Mattress Panel: Com. plywood Thickness Of Mattress Panel 12 mm, Storage cabinets under lower bed, sizes 860 mm W X 260 mm H x 850 mm D, running at two sets of channels, Qty 2 Nos. One wardrobe with sizes: 1800 mm Height X 920 mm Width X 400 mm Depth, with two sets of doors and individual lock for each compartment Modular switch board (one three-pin socket and three on-off switches) for mobile charging and on- off switches for fan and LED tube light Dark grey color for bed (steel frame) with powder coating finish of M.S parts Study Desk provision: Tubular frame mounted foldable desk (width 825 mm X depth 300mm) at a height of 457mm Light and fan provisions: Usha/Khaitan/Havells/Crompton/Bajaj fan (approved Model No.) mounted on the frame, with conduit-based wiring and LED-based adjustable light provision for Mosquito net installed for both upper and lower bed compartment. All Steel Component to be coated electrostatically with powder after picking and anticorrosive treatment 6 *Smart Bunk Beds (Customized with integrated study table, Individual light, charging port, Tubular Fan) Dimension (approx.): Overall Length Of Bed: 1830 mm, Overall Width Of Bed: 920 mm, Overall Height Of Bed: 1800 mm (with adjusters) With Removable Mosquito Net fixtures in all four corners for both upper and lower bed compartment Structure Of Metal Bed Frame Legs, M.S hollow box square section, Size Of Section 40mm x 40 mm X 1.6 mm thick Support Member For Mattresses M.S hollow box rectangular section of size 40mm x 20 mm X 1.6 mm, Support Members for top rails and stairs in 20 x 20 mm X 1.6 mm thick Mattress Panel With, Material Of Mattress Panel: Com. plywood Thickness Of Mattress Panel 12 mm, Storage cabinets under lower bed, sizes 860 mm W X 260 mm H x 850 mm D, running at two sets of channels, Qty 2 Nos. Modular switch board (one three-pin socket and three on-off switches) for mobile charging and on- off switches for fan and LED tube light Dark grey color for bed (steel frame) with powder coating finish of M.S parts Study Desk provision: Tubular frame mounted foldable desk (width 825 mm X depth 300mm) at a height of 457mm Light and fan provisions: Usha/Khaitan/Havells/Crompton/Bajaj fan (approved Model No.) mounted on the frame, with conduit-based wiring and LED-based adjustable light provision for Mosquito net installed for both upper and lower bed compartment. All Steel Component to be coated electrostatically with powder after picking and anticorrosive treatment Set 300 7 Steel cot size: 1830mm x 920mm Made of 50mm x 25mm rectangular pipe of 16 gauge Commercial grade ply of 19mm bolted onto the frame Head side height: 32, Leg side height: 26 3 vertical 20mm square pipes welded vertically on both head and leg side frame Head and leg frame made of 50mm x 25mm rectangular pipe welded with 3 nos. 20mm x 20mm vertically and a 25mm x 25mm horizontal pipe Height of bed: 18 with 3 nos. 50mm x 25mm support on understructure frame Storage cabinets under bed: size 750mm W x 350mm H x 600mm D, running at two sets of channels, Qty 1 Nos., with rubber levelers at all pipe endings Powder coating finish on all metal frame Provision of mosquito net Nos 50 8 Steel office almirah(storewell): Shall be size 916 mm (W) X486 mm(D) X 1981mm(H). It shall have welded construction made of 1 mm thick CRCA for back, Shelf & 1 mm thick CRCA for all other components and shall have steel hinged door. It shall have four full shelves. The finish shall be Epoxy Polyester Powder coated and having anti rust treatment to the thickness of 50 microns (+/-10). All steel structure components shall be processed and made from virgin material. Locks :6 lever mazak zinc platted Godrej or equivalent lock. 40mm adjuster Nos 60 4 nos at the bottom to be provided 9 2-door wardrobe steel almirah with a mirror( Household variant ) General Specification: Type: 2-Door Wardrobe Steel Almirah with Mirror Material: Steel Mirror: Yes, full-length mirror on one door Number of Doors: 2 Hanger Provision: Yes, provision to hang clothes by hangers Technical Parameters: Dimensions (approx.): Height: 180 cm, Width: 90 cm, Depth: 50 cm Weight: min 50 kg Door Type: Hinged doors Mirror Size (approx.): Height: 150 cm, Width: 40 cm Shelf Load Capacity: Each shelf can hold up to 15-20 kg Built Material: High-quality steel Steel Gauge: Typically 22 to 24-gauge steel for durability Painting: Powder-coated painting for a smooth finish and corrosion resistance Locking System: Secure central locking system with key or combination lock No. of Shelves: Usually 4-5 shelves for ample storage Brands: Godrej/Durian/Featherlite/Geeken or equivalent Nos 300 10 Steel Rack size :78 H X 36B X 15 Deep Shelf made up to 20 Gauge CRCA Sheet Size 36 X15 and Slotted Angle of 2 mm fitted with 5 Shelf.All metal parts should be powder coated. Nos 100 11 *Study Table with inbuilt wire management system & 2 round wire managers at corners & switch- socket combines (2 nos) attached to 19mm thick plybase(ideally 0.75 ft to 1 foot height) in between Metal legs Length 1200 mm (4 ft) Width 600 mm(2 ft) Height 750 mm(2.5 ft) Thickness Of Top 19 mm, Number Of Metal Frame 1.All Exposed Sides Are Edge Banded With PVC Tape Of Thickness 1.5 To 2.0 Mm. Rubber shoes are provided to prevent slipping. The material of the top will be plywood with edge banding tape on both sides, and the top has a thickness of 19 mm. The table has 4 legs made from MS tube with dimensions of 40 mm x 40 mm and a thickness of 1.2 mm. The color of the laminate is subject to approval by the client. Nos 600 12 Library table : size - 1800mm x 1200mm x 750mm (H). Top and understructure made up of :BWP gradepinewood plywood of 19mm and 12mm pasted with 0.80 mm sirmica all over. Topsize - 180mm x 1200mm x 32mm (thickness). Understructure size : 48(L) x 30 (w) x 30 (H)with two cupboards and four doors for storage section. Nos 40 13 Office Table with both side - One cupboard and one drawer. Dimension : 1800mmX900mmX750mm. Made up of - BWP grade pine wood plyboard of 19 mm & 12mm pasted with 0.80mm sunmica all over the exposed surface. Structure design : top and both sides thickness - 32mm Leg room for visitor in front of table 6 deep . Table to have foot rest. With lock in all drawer and cupboard. As per drawing provided. Nos 10 14 Office Table with one side cup board and other side 3 drawer. Dimension 1500mmX750mmX750mm. Top Made up of 17mm thick Prelaminated Particle Board. Understructure made up of 25 mm x 25 mm 16 gauge square pipe Cup board made up of 0.80 mm CRCA sheet with provision of lock. Nos 10 15 Nutrition lab table: Made up of 40mm x 40mm x 1.6mm MS square pipe. Table Size: 72 (L)x 32 (W)x 31 (H). Frame size: 69 (L)x 29 (W)x 30 (H) With 4 legs vertically connected with 4 nos horizontal pipe on the top , 2 nos pipe on the side of table , 5 above the floor welded on the vertical pipe and 1 nos pipe connected with the above mentioned pipe from the length size. All metal should be covered with powder coating. Granite top with polish on all 4 sides and size- 72 (L) x 32 (W) with cutting of two induction cooktop (Asper size provided by the client). 2 nos particle board (17mm) to befixed on both side of the table. Size- 29(L)X6 (W) with edge binding. Nos 20 16 Shoe Rack- For Hostel Width - 300 mm X Height-900mm X Length - 1800 mm ; Material :MS Sheet Thickness Of ( Minimum) 0.80 mm in all over. Number Of Shelves 4 confirming 5 rack with one vertical partition. All metal work with powder coating finish.Colour - Brown/ dark grey Nos 50 17 Display Almirah : Overall Width x Height x Depth 36.0 x 76.0 x 16 with 4 shelves and five racks. made up of 19 mm BWP grade plywood. pasted with 0.8mm sirmica on all sides. Top 3 racks door will be of glass (8mm glass) with push back facility and bottom 2 will be of 19 mm plywood. 18 High back executive chair With Arm rest : made of 12 mm thick hot pressed plywood ; fabric : Leather finished rexine. Size - 500mm X 500mm . Back height - 750mm x 500mm.The seat has extra thick foam on front edge to give comfort to popliteal area. The High Resilience Polyurethane foam is molded with the density of 45+/-2 Kg/m3 and hardness load 16+/-2 Kgf. Thickness of foam : Seat and back - 75mm. The chair shall be 360 degree revolving type and shall be designed with up right position locking with tilt tension adjustment. The seat/back tilting ratio shall be 1:3. The pneumatic height adjustment shall have an adjustment stroke of 12+/-0.3cm. The bellow shall be 3 piece telescopic type and injection molded in black polypropylene. The pedestal shall be injection molded in black 33% glassfilled nylon -66 and fitted with 5 nos. twin wheel castors. The pedestal dia shall be 66.3cm+/-0.5cm. The twin wheel castorsshall be injection molded in black nylon. Nos 10 19 Library Book shelves . 6½ft height × 3ft width ×12 inch depth with seven shelves . Manufactured from prime quality CRCA steel.Steel gauges 22 used in all frame,60 micron fully powder coated finish and heat treated Nos 20 20 Centre table: Body should be of teak wood. Dimension - 36 L X 21 W X 18 H. Glass should be of 12 mm thickness with toughened glass Nos 10 21 Sofa Set : One three seater main sofa with two single seated sofa chair Specification : Sofa (back rest) with basic frame work made in first class Hollock/Miranti/Mangowood (kiln seasoned and chemically treated,), the basefor sofa cushions to be made a layer of steel Springs uniformly distributed across the length and breadth of sofa frame work supported on frame of wood and base of ply and jute layer , gaps to be filled with coir of foam fillers and top layer to be made of a class jute sheet encompassing min. 50mm foam (Sleepwell/Kurlonmake). The seat shall have 150mm thick(minimum) cushions placed on the finished seat,which shall be duly upholstered. The back shall also have 100mm thick(minimum).Thefoam used shall be Flexi poly urethane foam of Sleep Well/Kurlon makewith a density of not less than 40 kg/ cucm. fabric - Leatherfinished rexine/ velvet/jute finish/matty. (good quality) sample to be approved by client. Nos 5 22 * Study Chair with side arm writing board Steel base with four legs Back section made of ABS with upholstered fabric Foldable writing pad made from Particle board (size approx. 24 x 12) Color and Finish: Matty black Padded seat and backrest with Polyurethane Foam Seat height: 440mm, Seat depth: 440mm, Seat width: 490mm Backrest height: 400mm, Backrest width: 490mm Study Chair with side arm writing board Steel base with four legs Back section made of ABS with upholstered fabric Foldable writing pad made from Particle board (size approx. 24 x 12) Color and Finish: Matty black Padded seat and backrest with Polyurethane Foam Seat height: 440mm, Seat depth: 440mm, Seat width: 490mm Backrest height: 400mm, Backrest width: 490mm Nos 200 23 *Wheel mounted Study Chair with side arm writing board Steel base with four legs and wheels Back section made of ABS with upholstered fabric Foldable writing pad made from Particle board (size approx. 24 x 12) Color and Finish: Matty black Padded seat and backrest with Polyurethane Foam Seat height: 440mm, Seat depth: 440mm, Seat width: 490mm Backrest height: 400mm, Backrest width: 490mm Study Chair with side arm writing board Steel base with four legs Back section made of ABS with upholstered fabric Foldable writing pad made from Particle board (size approx. 24 x 12) Color and Finish: Matty black Padded seat and backrest with Polyurethane Foam Seat height: 440mm, Seat depth: 440mm, Seat width: 490mm Backrest height: 400mm, Backrest width: 490mm Make: Godrej Scintilla/ Durian / Geeken or equivalent Nos 100 24 Folding Bed: Folding Cot Steel Frame Fitted With Ply Wood Top (SIZE: 2100X 900 X 19 mm.) Nos 100 25 Synthetic Fibre Stackable armchairs Make: Durian/Neelkamal/Supreme/Cello Nos 150 26 Plastic Armless Chair with Steel Legs; Dimension in cm (approx.): 55W X 44D X 80H; Primary Material: Plastic; Secondary Material – Base: Stainless Steel Easy to Stack and Clean 500 27 Workshop Work Bench Fitters Workshop (Workbench Min Dim 150 cm x 90 cm x 75 cm, 0.5 Thick Rubber mat top, 3 drawers for Tools + Lock, , minimum80 kg Steel Weight, 2 Intermediate racks below Bench top for storage purpose, Colour Grey, Rubber Heel for Legs Nos 50 28 ESD Soldering WORK STATION TABLE (For Soldering and electronics Lab work) Overall Size: L1500 X W750 X H1500mm The main frame structure with four legs, foot rest, including front and overhead shed of table Made of 32x32 mm CRC steel or Aluminium rust proof powder coated (thickness 50) microns square pipe, and 25 x 25 square pipe for middle support of frame. The front side of the table (non user side) should be half covered height wise with CRCA sheet or aluminium, the complete CRCA sheet aluminium should be perforated uniquely and uniformly for more sturdy design and atheistic looks. There is a provision for working light for better visibility working area, with suitable size of tube light with shiner to be provided. ½ pin board and ½ white board for reminder purpose fixed on front of the table Electrical Box: 3 nos switch/socket with 6/16 Amp, MCB & Indicator. In front of work area. One table top made of ISO grade 18 mm plywood hot pasted with hot rolled machine at 3m/min speed of ESD Mat for better affirmative of mat provided ofGreen, Grey, and Blue Colour for fire proofing / short-circuit proof work. The table shall have One of storage drawer unit slides on telescopic ball channel with handle. The drawer shall be made up of .9mm CRC steel sheet. All metal Structure would be treated by seven tanks process for Powder Coating Paint i.e. Digressing (1st Tank), Water rinsing (2nd Tank), De-rusting by Acid (3rd Tank), Water rinsing (4th Tank), Phosphating (5th Tank), Water rinsing (6th Tank), Passivation (7th Tank) respectively with non- electrolytic deep process to produce a protective coating for smooth surface with matt finish anticorrosive automated Powder Coating Paint of thickness 40-50 microns and oven baked for high resistance to scratch, chemical, thermal and mechanical stress. Nos 50 29 Stackable Bed: size-72x36x20, legs made up of 32mm round pipe, framemade up of 25mm square pipe and 19mm square pipe, bed top made up of 17mm plain MDF Board, Bed size-72x36 Nos 100 30 Table without Drawer Size: 1200mm (L) X 900mm (W) X 750mm (H) with inbuilt wire management system & 2 round wire managers at corners & switch-socket combines (2 nos) attached to 19mm thick ply base(ideally 0.75 ft to 1 foot height) in between Metal legs. Understructure frame: 40X40X1.6mm MS pipe Provided with 25mm PLB Top with PVC Edge bind (Complete in White Colour) Nos 50 31 Plastic Moulded Chair Without Arms Without Cushion (Stackable). Dimension in cm (approx.): 55W X 44D X 80H; Material: Plastic/Virgin polymer with Stainless Steel legs Color : Blue/Red/Black/White (As preferred by PREJHA Team) Make: Durian/Nilkamal/Supreme/Cello No 400 *
