Tender for repair work of Ram Bagh Kali House situated in Azad Square Nagar under Zone 4 Ward 43, 1 Dismentling RCC or RB work and including stacking of materials with all complete work 2 Dismentling ofexisting plaster including disposal ofrefse within adistance of 60m with all complete work 3 Dismentling existing of cc/brick/granolithic floor dismanteled materialstacking of materials with all complete work 4 Earth work Exavation in foundation as in wet and foul position leadlift &30 m lead with aqll complete work (S.I.No.251) 5 PCC 1:6:12 cement sand and 40mm brick ballast and all compelte the work (s.I.No.-273) 6 R.CC work (1:1.5:3) with cement course sand &20mm the stone grit including all complete work (S.I.No.279B) 7 M.S iron work including cutting bending and praper laying all complete work (S.I.No.504) 8 1st class brick work (1:4) cement sand mortor including all complete work (S.I.No.303) 9 12mm thick plaster cement mortar consisting of 1 part cement and 4 parts of fine sand of 1.25 finerness modulus.SI 574 10 Fixing of mild steel or iron work in angle iron door window fame including cutting bending and wastage including supply of all material etc all complete work 11 Providing reinforced by organic fibres or inorganic synthetic fibres cement 6mm thick corrugated sheet etc all complete work 12 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3.15 mm thick M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of read lead paint on all sides and digonal bracing etc complete. As Per DSR Code 10.5.2Using flats30x6mm for diagonal braces and central cross piece. D.S.R. 13 Provic and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 14 Wall painting (two coats) with plastic emulsion paint of first quality approved brand manufacture on undecorated wall surface to give an even shade i/c thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared smooth as 15 Painting or varnishing new work in small areas wood work or iron work one coat of ready mixd priming paint and one coat of app superior quality ready mixed paint with all complet 16 Every after first coat or subsequent coat 5.0.R 5.NO 15.02 ITEM NO-642) 17 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4 (1) cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete 18 Providing and fixing Ist quality ceramic glazed wall tiles conforming to 15: 15622 (thickness to be specified by the manufacturer), of approved make, im all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR 8.31 19 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix. 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @2 litre per 50 kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. DSR 11.4 20 Providing and fixing ISI marked flush door shutters conforming to IS 2202 (Part 1) non- decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters DSR 18 9.21.1.1.A. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 21 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: DSR 10.30.1 22 S/F of 24 guage Aluminum sheet on toilet door shutters bottom including fixing with aluminum greeves 23 Wiring point for light with 1.5 sq mm FALSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting.complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose/angle/batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 24 proviing point for fan with 10 sq.mm FRESH PVC insulated multistrand single core Copper Candor 5 000 No 671.000 cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwite drawn inside the conduit continuity wire, pano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 25 Wiring point for plug with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor 5.000 No 671.000 3355.000 cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 26 Supply and fixing of 6amp to 32 amp SP MCB 27 Supply and fixing of Ceiling Fans with fan motor of AC permanent insulation cpacitator rating confirming BEE 5 Star rating and is 374/79 and Also comply with 15 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1 PH AC the fan assembled should consist of down rod blades, shakel canopies etc and with double wall bearing system BEE 5 star rated 1200 mm sweep 51 No. 1501 28 Supply and fixing of tubelights including all fittings etc complete 29 Providing and placing on terrace polythlene water storage tank 5 12701 marked wittrcover and suitable locking aggangerment and making necessary holes for inlet, outlet and overflow pipes but out fitting and baser support tank etc all complete 30 P/T INDIAN TYPE WC with seat and 10 fit flushing cistern & CP flush bend with fittings & C brackets 40mm flush bend etc complete all fittings, as per required 31 p/F white viterous china wash basin with CI/MS bracks 15 mm CP brass waste of standard pattern 550*400mm with 15 mm cp brass pillar tap 32 p/f flexible PVC waste pipe for wasti bagin including waste fittings 32 mm dia 33 Providing & fixing soil, waste and vent pipes a) 100mm dia centrifugally cast iron 5 & 5 pipe 34 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermastabeds for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fiung the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Charge15 mm nominal outer dia Pipes 35 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermastabeds for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fiung the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Charge20 mm nominal outer dia Pipes 36 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermastabeds for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fiung the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Charge25 mm nominal outer dia Pipes 37 Providing & fixing CP brass bib cock of approved quality conforming to 15 8931a) 15mm nominal bore 38 Providing & fixing C.P. brass angle valve for basin miser and gyser points of approved quality conforming to 15 8931(a) 15mm nominal bore 39 Supply of Chairs etc. all complete work as per market rate 40 Supply of Table etc. all complete work as per market rate 41 Dismantlingofexisting damageinterlockingteesee uding all complete work 42 Construction of Granular Sub base (G.S.B) by providing closed graded material mixing by mix in place method including water and compacting with vibratory rollers as per MORT& H specification401 43 Realaying of interlocking tiles of thickness 60mm to 80mm includind levelling and dressing of surface to requir evel 44 Providing &laying of Rubber molded reflective Zig-Zag 80 mm thickInterlocking tiles of precast compressivestrength I.S.I marked. In gray based Including joints filled and bedding 5cm. With local sand leveling dressing of surface required level &slop and also including all materail labour T&p loading unloading stacking cartage and all taxes required for proper completion of work as per MORD specification No.1500 45 Supply and fixing of inoguration black granite stone padestal i/c grooving matter, b/w, plaster, painting etc all complete work
