|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.A.R No-15.23.1 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. D.A.R No-15.56 |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead. Of area 3 sq. metres and below(D.S.R No-15.12.1) |
| 4 | Brick work with common burnt clayF.P.S (non madular) brick of class designation 7.5in superstructure above plinth level up to floor V level in all shape and sizes in ::(1 cement :4 coarse sand ) D.S.R- 6.4.1) |
| 5 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1 |
| 6 | Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DSR No- 18.8.2 |
| 7 | Providing and fixing of CPVC gate valve of 25mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 8 | Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge110 mm dia. |
| 9 | Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge, 90 mm dia. |
| 10 | Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 11 | Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 12 | Providing and fixing of Nahani Trap Tee of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level. 1:2:4 (1 cement 2coarse sand (zone-III) 4 graded stone aggregate 20 mm nominal size). DSR No- 4.1.3 |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.All work up to plinth level, 1:6:12 (1 cement 6 coarse sand (zone-III) 12 graded Brick aggregate 40 mm nominal size).PWD (SCH) 273. |
| 15 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38) |
| 16 | Providing and fixing 1st quality ceramic glazed wall tiles rectified (Kajaria/Johnson/RAK premium quality) conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, blackas approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 300x450mm |
| 17 | Providing and fixing white viterous china pedestal type water closet (European type W.C. pan) with seat and lid10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.W.C. pan with ISI marked white solid plastic seat and lid. (DSR- 17.2.1) |
| 18 | Providing and fixing of white glazed earthen ware Wash Hand Basin with without pedestal ( 22\"x16\" ) with C.P jali, C.P pilar cock, C.P angle valve ,PVC connection 15mm dia 450mm long including supply of all materials labour T&P etc. required for proper completion of the work. |
| 19 | Providing and fixing C.P. brass shower heavy quality or eqv.) with 15mm inlet:100 mm diameter |
| 20 | Providing and fixing CP Brass towel rail 750x20mm together with pair of CP brass brackets to fit the towel rail complete |
| 21 | Supply and Fixing C.P. brass bib cock 15mm. dia.Long body including supply of all materials, labour, T&P etc. required for proper completion of the work. |
| 22 | Providing and fixing C.P. Soap Dish including supply of all material , labour T&P etc. complete. |
| 23 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(DSR.17.31) |
| 24 | Supply and fixingof steel kitchen sink 610X510X200 mm without drain board,with C.P.jali, P.V.C. waste pipe,bracket,including supply of allmaterial, labour, T&P etc. for proper completion of work. |
| 25 | Distempering with 1st quality acrylic distemper(ready mixed )having VOC (Volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .DSR-13.81 |
| 26 | Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1) |
| 27 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18 |
