Tender For Rfq - Belt - St 600 Ep 6323 - Mh 14 Items Bf 1 & Corex 1 33418844 0001 0001 300027522 BELT,CONV,1000MM,EP1250/5,4/2,HBAR Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : NAVNEET.SHUKLA@AMNS.IN 116 M BELT,CONVEYOR TYPE : OPEN ENDS , SHAPE : CLEAT AND SIDE WALL TENSILE STRENGTH : 1250 N/MM , NUMBER OF PLY : 5 WIDTH : 1000 MM , TOP COVER THICKNESS : 4 MM BOTTOM COVER THICKNESS : 2 MM , BELT CARCASS THICKNESS : 7.9 MM BELT CARCASS MATERIAL : ELASTOMER POLYAMIDE BELT TOP COVER GRADE : HIGH BLACK ABRASION RESISTANT , EDGE : MOULDED SHORE HARDNESS : 60 , NO. OF CROSS RIGIDITY PLIES : 2 CLEAT LENGTH : 560 MM , CLEAT HEIGHT : TCW 230 SIDE WALL HEIGHT : MWS 250 , CLEAT PITCH : 240 MM ADDITIONAL INFORMATION : CROSS SECTION: 145-75-560-75-145 Item Details : 1. Conveyor Belt is required as per PO Text only. Any variations without the written approval of AMNS will lead to PO Qty rejection. 2. Conveyor belts to be provided in AMNS-approved roll lengths only, vendor must ensure the same before manufacturing 3. Vendor must obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters approval before manufacturing 4. Vendor to manufacture and dispatch Conveyor Belt Roll qty strictly as per AMNS-approved Dispatch Clearance only 5. Conveyor Belt Qty dispatched to AMNS site without obtaining necessary dispatch clearances will be rejected 6. AMNS holds the right to conduct inspection of conveyor belt through Online, Physical or NABL approved agency. 7. Conveyor belts not meeting our Material specification, AMNS requested parameters, Inspection quality will be rejected 8. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO delivery date 9. Conveyor Belt rolls to be packed and supplied in impregnated tarpaulin or other material suitable for outdoor yard storage Item Note : 2 33418844 0002 0002 300016789 BELT,CONV,1400MM,ST,1400,8/4,M24 Technical Details Name : Navneet Kumar Shukla Contact : 9909901012 Email : NAVNEET.SHUKLA@AMNS.IN 660 M BELT,CONVEYOR TYPE : OPEN ENDS , SHAPE : FLAT , TENSILE STRENGTH : 1400 N/MM WIDTH : 1400 MM , TOP COVER THICKNESS : 8 MM BOTTOM COVER THICKNESS : 4 MM , CARCASS THICKNESS: 4.8 MM BELT CARCASS MATERIAL : STEEL CORD , BELT TOP COVER GRADE : M24 EDGE : MOULDED , STEEL CORD DIAMETER : 4.5 MM STEEL CORD PITCH : 12 MM , NUMBER OF STEEL CORDS : 111 BREAKER CORD DIAMETER : 1.7 MM Item Details : 1. Conveyor Belt is required as per PO Text only. Any variations without the written approval of AMNS will lead to PO Qty rejection. 2. Conveyor belts to be provided in AMNS-approved roll lengths only, vendor must ensure the same before manufacturing 3. Vendor must obtain AMNS clearance for TDS, GA DWG, QAP and other technical parameters approval before manufacturing 4. Vendor to manufacture and dispatch Conveyor Belt Roll qty strictly as per AMNS-approved Dispatch Clearance only 5. Conveyor Belt Qty dispatched to AMNS site without obtaining necessary dispatch clearances will be rejected 6. AMNS holds the right to conduct inspection of conveyor belt through Online, Physical or NABL approved agency. 7. Conveyor belts not meeting our Material specification, AMNS requested parameters, Inspection quality will be rejected 8. In case of any failure or defects, vendor must take care of necessary replacements at their own cost as per PO delivery date 9. Conveyor Belt rolls to be packed and supplied in impregnated tarpaulin or other material suitable for outdoor yard storag
