Tender For Supply, installation, testing & commissioning Pumping Set And Other Works For U.G.R In Sector-22A Yea Wc-(E M-04), 1 Supply of clear water submersible pumping plant suitable for reserve wire including common header for 3 pumping sets design of 500mmwith dismantlingjoint, sluice valve, NRV of suitable size, bend , delivery m.s. pipeand jointing existing pipeline and lifting arrangement with single grader pulley, chain block, lifting chain with capacity of 8700 LPm at 26 mtr head with 90BHP Pumpas per satisfaction Engineer in charge complete in all respects. kirloskar, jasco, kSB. Analysis of Rate 2 Supply 1 No Control Panel Suitable for all above 3 nos pump set including 1 no incomingmcb of 400 amp capacity including separate amp meter, voltmeters, frequency meter with slector switchand metering panel How ever meter will be supplied by UPCL as per satisfaction Engineer in charge complete in all respect. Analysis of Rate 3 Supply and fixing C.Isluice valve of kirloskar / IVC make P.N-1.0 rating.Complete in all respect, as directed by Engineer in charge(1). 500mm Analysis of Rate 4 Supply and fixing C.INRVof kirloskar / IVC makeP.N-1.0 rating.Complete in all respect, as directed by Engineer in charge(1). 500mmAnalysis of Rate 5 Supply of guru/ISI makes pressure gauges with S.S. tubing arrangement for all the pumpsseparately for all pumps and common header,Complete in all respect, as directed by Engineer in charge Analysis of Rate 6 Installation of all pumping plantincluding civil,electrical and mechanical work as per satisfaction Engineer in charge complete in all respect, Analysis of Rate 7 Supply of rubber mat 25 mm thick1X3 mt or equal to panel length. Complete in all respect, as directed by Engineer in chargeAnalysis of Rate 8 S/F of D.I Pipe k7 500mm dia.Complete in all respect, as directed by Engineer in charge Analysis of Rate 9 S/F of Bend 500mm (socketed).Complete in all respect, as directed by Engineer in charge Analysis of Rate 10 S/F of Clamps for holding open500mm pipe with fastener.Complete in all respect, as directed by Engineer in charge Analysis of Rate 11 Testing and commissioningand trial month for 1 month .Complete in all respect, as directed by Engineer in charge Analysis of Rate 12 Painting of pumpingplant including pipeline and valves.Complete in all respect, as directed by Engineer in charge Analysis of Rate 13 Supply & laying of Aluminium condutor, XPLE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surgace the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, completed in all respect. The armouring of the cabel shall be properly connected with the earth conductor by clamps etc. (CCI (Bombay/Nasik), Fort Gloster (Calcutta/Baripara), Asian (Thane/Silvasa), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make & for small works upto value of cable for Rs. 25.00 Lacs Klinga, Suraj, Delton, Grandley & Polycab make can be used) as per the directions of the Engineer-in-chargePWD-2018 P.S.-501 14 3.5Cx240 sqm. 15 3.5Cx70 sqm. 16 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. PWD-2018 P.S.-504 17 240 sqm. 18 70 sqm. 19 Supply & fixing of brass nicle plated compression gland for PVC insulated & sheathed, armoured served, underground cable including rubber ring etc complete in all respects. The armouring of the cable shall be properly connected with earth as per direction of Engineer-in-charge. PWD-2018 P.S.-503 20 240 sqm. 21 70 sqm. 22 S/E of Section Double pole structure on ST pole 410 SP-62 with 1/6 over length of poles grounted with cement concrete in 1:3:6 (one cement : 3 coarse sand :6 Stone balleast) including plingthingof pole 30 cm above grade level, plastering of plinth including excavation & back filling etc. The double pole structure consist of 100X50X6 2.50 mtr. & 75X40X6 mm 2.5 mtr. M.S. channelwith M.S. clamp packing piece Nuts Bolts etc. The rates includes all materials labour T&P etc. required for proper completion of work as per direction of E/I. YEIDA SOR-51 23 S/F of cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. Complete in all respect, as directed by Engineer in charge. YEIDA SOR-30 24 Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect.Complete in all respect, as directed by Engineer in charge PWD-2018 P.S.-634 25 Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & GI earth wire 7/14.Complete in all respect, as directed by Engineer in charge YEIDA SOR-52 26 S/F of G.I Pipe 150MM dia Bclass Zindal/tata make including reqired material T&P etc.Complete in all respect, as directed by Engineer in charge. Analysis of rate 27 Supply, delivery, laying testing & commissioning of 11KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. 28 It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respects and as per requirement of the job. (CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make PWD-2018 P.S.-506 (a) 3CX120 Sqmm. 29 S/L of 160mm dia. DWC pipe for drawing of power cable across the road by drilling of 190mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge YEIDA SOR-14 30 Supply, Delivery, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable for cable termination at the panel & transformer complete in all respects as required for proper completion of work. (650mm length) (make Raychem/C.C.I./Frontec) (a).3CX120 Sq.mm. YEIDA SOR-5 31 S/F of 11 KV TPMO set of ‘Relco’ make or equivalent with insulators and other accessories required Complete in all respect, as directed by Engineer in charge. YEIDA SOR-56 32 S/F of 11 KV Drop-out type fuse set channel type of ‘Relco’ or equivalent make with insulators and other accessories Complete in all respect, as directed by Engineer in charge. YEIDA SOR-57 33 Supply, Installation, testing and commissioning of Out door type distribution transformer. Specification and also confirming to IS : 1180. Level-2Complete in all respect, as directed by Engineer in charge YEIDA SOR-57 (a) 63 KVA Aluminium wound
