|
| 1 | Supplying and fixing double door 4 WAY Vertical TPN MCBDistribution board for MCCB incomer with IP-42/43protection, with 1 No. 160 A FP MCCB as incomer and 2 NOS 63A TP MCB, 2 NOS 32 A TP MCB as outgoing complete on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment |
| 2 | Supplying and fixing double door 6 way TPN MCB Distribution board with IP-42/43 protectionwith 1 No. 63 A FP MCB as incomer and 18 nos. 6-32 A SP MCB as outgoing complete , concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment with following MCBs & MCB Isolator . |
| 3 | S & F 2+12 way double door IP-43 SPN MCB distribution board with 1 No. 40 A DP MCB as incomer and 10 no 6-32 A SP MCB as outgoing complete with Din Rail, Earth, Neutral & Phase Bars etc. to be partially recessed in wall with earthing attachment. |
| 4 | Supply1.1 KV grade PVC Armoured XLPE insulated AL conductor cable . i) 3.5 core X 50 sq.mm. |
| 5 | Laying of cable from 3/3½ core 35 sqmm to 50 sqmm onwall/surface incl. S & F MS saddles with earthingttachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting |
| 6 | S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow.i) 3.5 core X 50 sq.mm. |
| 7 | Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials.i) 3.5 core X 50 sq.mm. |
| 8 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finisha) Avg run 10 mtr. |
| 9 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECCOn Board. |
| 10 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plugsocket (Brand approved by EIC) with 6A Modular typeswitch, without plug top on 4 Module GI/PVC Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and makingnecy. connections with PVC Cu wire and earth continuitywire etc. |
| 11 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plugsocket (Brand approved by EIC) with 16A Modular typeswitch, without plug top on 4 Module GI /PVC Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wireetc. |
| 12 | Supply of 250 V 300 mm. sweep,1400 rpm industrial type heavy duty (ISI)high speed exhaust fan. |
| 13 | Fixing only 300 mm diaexhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection. |
| 14 | Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) |
| 15 | S & F 250 V 1200 mm BLDC AC ceiling fancompletewith blades, canopy, down rod etc. having fixed with 2 nos ball bearing fixing the same, painting of down rod, connection by supplying 3×1.5 sq. mm stranded copper wire. |
| 16 | Supplying & fixing medium gaugeGI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 25mm Dia. |
| 17 | Supply of high speed wall mountingBLDC bracket fan 240 V 400 mm sweepfixed with close mesh guard , pull chain arrangement for speed control and sturd and heavy duty blades for higher displacement of air . |
| 18 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length |
| 19 | Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991) |
| 20 | Supply & Fixing 240V, Modular Socket (2 Module) type fanregulator (Step type) (Brand approved by EIC) on existingModular GI switch board with top cover plate incl. makingnecy. connections etc. |
| 21 | Supply of 240V LED tube light mounting rail lighting luminaire to be fixed on ceiling for TLED lamp with necessary connection and earthing attachment . |
| 22 | Fixing only Single/twinfluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length. |
| 23 | Supply ofsurface mounted 18 watt LED down lighters which range is a breakthrough technology and reliable heat management to deliver a long lasting efficient solution . |
| 24 | Supplying10 Watt bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set. |
| 25 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 10 W LED lamp. |
| 26 | Fixing only bulk head /ceiling fitting on wall /ceiling by screws etc. |
| 27 | Supply 70 W Energy saving ,enviromental friendly,long life,exclusive innovative die-cast aluminium IP65 flood light ,suitable for highlighting architectural façade and genaral purpose lighting. |
| 28 | Supplying and fixing 19 mm dia and 3 mm thick polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) |
| 29 | Supplying and Drawing 1.1 KV single core stranded \"FR\"PVC insulated & unsheathed single core stranded copper wire of the following sizes in the prelaid polythene pipeby the GI fish wire and making necy. connection as required.a) 4x80/0.4 (10 sqmm) + 2x84/0.3 (6 sqmm) as ECC |
| 30 | b) 2×10 sq.mm. + 1×6 sq.mm. |
| 31 | d)2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 32 | e)3 x 22/0.3 (3x1.5 sqmm) |
| 33 | Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support.200x50x1.25mm (18SWG) |
| 34 | 300x50x1.25mm (18SWG) |
| 35 | i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed. |
| 36 | S & F earth bus bar of GI (Hot Dip) MS flat of 50 mm × 6 mm on wall is having clearance of 8 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers spacing insulators tc. As required. |
| 37 | Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode |
| 38 | Installation of security light:Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting |
| 39 | Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint |
| 40 | Supply of 1.1 KV grade PVC /A aluminium conductor2 core X 10 sq.mm( KEI/Crystal/Polycab) |
| 41 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 42 | S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow.i)2 core X 10 sq.mm. |
| 43 | Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials.i) 2 core X 10 sq.mm. |
| 44 | Supply & laying of 3 X 2.5 sq. mm PVC insulated copper conductor FR wire from loop box to fittings in 15 mm dia polythene pipe including connection as required. |
| 45 | Supplying and fixing 4 WAY MCB SS enclosure with IP-20/30 protection, powder coated including 2 NOS 6-32A two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment |
| 46 | 6-32A DP MCB |
| 47 | Supply of 120 W LED Street light luminaire with high power LED |
| 48 | Drilling borehole by Rig machine with Odex-115 (Simultaneous driving of casing pipe) method of drilling through any kind of soil, boulder, rock etc. upto the required depth. This item includes the cost of hiring of Rig machine, Compressor, Supporting vehicle and otherachinery & equipments with operators, drivers, laborersetc. Proportionate cost of drilling tools and accessories such as Hammer, Pilot bit, Reamer bit, Guide device, Guide sleeve etc. Cost of consumable materials like fuel & ubricants, electrode for welding, any other related requipment, materials and service etc.a). GL to 60 mtr. |
| 49 | b) 60 Mtr. To 100 Mtrs. |
| 50 | Lowering and placing of filter assembly of required length and Extraction and partening off the casing pipe ofrequired length. |
| 51 | Mobilisation and transportion of the Rig machine and itsaccessories and others materials, etc. to the site |
| 52 | Development of the tubewell by Air Compressor and BHT/ othersuitable pump and Yield Testing by BHT/ other suitable pumping machinery upto the satisfaction of EIC. It includes arrangement of all machinery, supply of fuel & lubricants, laborers, any others etc |
| 53 | Supply and delivery of 128 mm ID/139 mm OD MSERW fin cutpipe |
| 54 | Supply and delivery of 80 mm dia x 3 mtr. Long HDPE JacketedStrainer |
| 55 | Supply and delivery of Bit tube (0.67mtr. Long) for Odex-115 |
| 56 | Supply and delivery of Casing Shoe (for Odex-115) |
| 57 | Supply and delivery of Packer Assembly (for Odex-115) |
| 58 | Supply and delivery of MS TW Specials (Clamp, Cap, Bail plug,Lugs, Ring etc.) |
| 59 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 60 | Supply, fitting, fixing and lowering the following with fabrication as required:(a)80 mm dia bottom cap. |
| 61 | (b) 150 X 80 |
| 62 | ©150 mm dia M.S. Top cap with hole. |
| 63 | (d) 150 mm dia M.S. Ring. |
| 64 | (e) 100 mm dia MS Ring. |
| 65 | (f) 80 mm dia Centre Guide. |
| 66 | (g) Threaded Adopter( 80 mm Dia). |
| 67 | (H) Threaded Adopter( 150 mm Dia). |
| 68 | Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required |
| 69 | Supply, fabrication & installation of header assembly made of 150 mm dia 1.2 meter long black MS pipe having both sides sealed by welding provision for with MS sheet for 1 No. 50 mm dia inlet & 4 nos 50 mm dia outlet to be fixed on 50 & 40 mm short pieces welded with 150 mm header including 4 nos gun metal wheel wash out line with provision for pressure gauge and 1/2\"\" Fullway valve,nipple and presure gaugeto be fixed on Headerwith all supporting arrangement & painting etc as per direction of EIC. |
| 70 | Supply, fitting, fixing 50 mm dia G.I. Pipe (ISI-M) column pipe for submersible pump lowering having 3-mtr average length including special threading in Lathe and S & F one GI socket. |
| 71 | Making of brick pillar of suitable size with neat cement plastering for supporting lead/plumbing line as per instruction of EIC. |
| 72 | S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC. |
| 73 | Supplying, fitting and fixing G.I. cap at top suitable for tube well. |
| 74 | S & F 20 mm dia G.I. Pipe (ISI-M) for protection of cable. |
| 75 | S & F of G.I. Accessories ISI approved with all jointing materials:a) 50 mm dia Bend |
| 76 | b) 50 mm dia Elbow. |
| 77 | c) 50 mm dia Nipple. |
| 78 | d) 50 mm diaUnion. |
| 79 | e) 50 mm dia Socket. |
| 80 | Supply and Installation of 2 HP Submersible pump motor set suitable for 125 mm dia deep tube well capable for discharging 35 LPM(max) of Clear water at a total head of 58 mtr(min) having a discharging outlet of 32 mm dia with 2.5 sqmm (Finolex) 3 core PVC flat copper cable of 50 mtr including LT make DOL starter (Make approved by EIC) |
| 81 | Supply ,Transportation, Loading & unloading offollowing types of 1.1KV grade XLPE 1.1kv grade AI armoured XLPE cable2 Core 10 sq. mm |
| 82 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 83 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core upto 10 sqmm |
| 84 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 10 sqmm cable |
| 85 | Labour for punching hole in plasticwater storage tank upto 50 mm dia. |
| 86 | Supplying, fitting & fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD ‐ 1785 & threaded to match with GI Pipes as per IS : 1239 (Part ‐ I). With all necessary accessories, specials viz. socket, reducing tee, short piece etc. fitted with holderbatsclamps, including cutting pipes, maing threads, fitting,fixing etc. complete in all respect including cost of all coats of painting with approved paint in any positionabove ground.(Payment will be made on the centre line measurments of total pipe line including all specials. No separate payment will be made for assesories, specials. Payment for painting will be made seperately)a) For Exposed Work.PVC Pipes 50 mm dia |
| 87 | Supply and delivery of Bit tube (0.67mtr. Long) for Odex-115 |
| 88 | Supply and delivery of Casing Shoe (for Odex-115) |
| 89 | Supply and delivery of Packer Assembly (for Odex-115) |
| 90 | Supply and delivery of MS TW Specials (Clamp, Cap, Bail plug,Lugs, Ring etc.) |
| 91 | Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction. |
| 92 | Supply, fitting, fixing and lowering the following with fabrication as required:(a)80 mm dia bottom cap. |
| 93 | (b) 150 X 80 |
| 94 | ©150 mm dia M.S. Top cap with hole. |
| 95 | (d) 150 mm dia M.S. Ring. |
| 96 | (e) 100 mm dia MS Ring. |
| 97 | (f) 80 mm dia Centre Guide. |
| 98 | (g) Threaded Adopter( 80 mm Dia). |
| 99 | (H) Threaded Adopter( 150 mm Dia). |
| 100 | Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required |
| 101 | Supply, fabrication & installation of header assembly made of 150 mm dia 1.2 meter long black MS pipe having both sides sealed by welding provision for with MS sheet for 1 No. 50 mm dia inlet & 4 nos 50 mm dia outlet to be fixed on 50 & 40 mm short pieces welded with 150 mm header including 4 nos gun metal wheel wash out line with provision for pressure gauge and 1/2\"\" Fullway valve,nipple and presure gaugeto be fixed on Headerwith all supporting arrangement & painting etc as per direction of EIC. |
| 102 | Supply, fitting, fixing 50 mm dia G.I. Pipe (ISI-M) column pipe for submersible pump lowering having 3-mtr average length including special threading in Lathe and S & F one GI socket. |
| 103 | Making of brick pillar of suitable size with neat cement plastering for supporting lead/plumbing line as per instruction of EIC. |
| 104 | S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC. |
| 105 | Supplying, fitting and fixing G.I. cap at top suitable for tube well. |
| 106 | S & F 20 mm dia G.I. Pipe (ISI-M) for protection of cable. |
| 107 | S & F of G.I. Accessories ISI approved with all jointing materials:a) 50 mm dia Bend |
| 108 | b) 50 mm dia Elbow. |
| 109 | c) 50 mm dia Nipple. |
| 110 | d) 50 mm diaUnion. |
| 111 | e) 50 mm dia Socket. |
| 112 | Supply and Installation of 2 HP Submersible pump motor set suitable for 125 mm dia deep tube well capable for discharging 35 LPM(max) of Clear water at a total head of 58 mtr(min) having a discharging outlet of 32 mm dia with 2.5 sqmm (Finolex) 3 core PVC flat copper cable of 50 mtr including LT make DOL starter (Make approved by EIC) |
| 113 | Supply ,Transportation, Loading & unloading offollowing types of 1.1KV grade XLPE 1.1kv grade AI armoured XLPE cable2 Core 10 sq. mm |
| 114 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 115 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core upto 10 sqmm |
| 116 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 10 sqmm cable |
| 117 | Labour for punching hole in plasticwater storage tank upto 50 mm dia. |
| 118 | Supplying, fitting & fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD ‐ 1785 & threaded to match with GI Pipes as per IS : 1239 (Part ‐ I). With all necessary accessories, specials viz. socket, reducing tee, short piece etc. fitted with holderbatsclamps, including cutting pipes, maing threads, fitting,fixing etc. complete in all respect including cost of all coats of painting with approved paint in any positionabove ground.(Payment will be made on the centre line measurments of total pipe line including all specials. No separate payment will be made for assesories, specials. Payment for painting will be made seperately)a) For Exposed Work.PVC Pipes 50 mm dia |
| 119 | Making of brick pillar of suitable size with neat cement plastering for supporting lead/plumbing line as per instruction of EIC. |
| 120 | S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC. |
| 121 | Supplying, fitting and fixing G.I. cap at top suitable for tube well. |
| 122 | S & F 20 mm dia G.I. Pipe (ISI-M) for protection of cable. |
| 123 | S & F of G.I. Accessories ISI approved with all jointing materials:a) 50 mm dia Bend |
| 124 | b) 50 mm dia Elbow. |
| 125 | c) 50 mm dia Nipple. |
| 126 | d) 50 mm diaUnion. |
| 127 | e) 50 mm dia Socket. |
| 128 | Supply and Installation of 2 HP Submersible pump motor set suitable for 125 mm dia deep tube well capable for discharging 35 LPM(max) of Clear water at a total head of 58 mtr(min) having a discharging outlet of 32 mm dia with 2.5 sqmm (Finolex) 3 core PVC flat copper cable of 50 mtr including LT make DOL starter (Make approved by EIC) |
| 129 | Supply ,Transportation, Loading & unloading offollowing types of 1.1KV grade XLPE 1.1kv grade AI armoured XLPE cable2 Core 10 sq. mm |
| 130 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed |
| 131 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : For 2 core upto 10 sqmm |
| 132 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 2 core 10 sqmm cable |
| 133 | Labour for punching hole in plasticwater storage tank upto 50 mm dia. |
| 134 | Supplying, fitting & fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD ‐ 1785 & threaded to match with GI Pipes as per IS : 1239 (Part ‐ I). With all necessary accessories, specials viz. socket, reducing tee, short piece etc. fitted with holderbatsclamps, including cutting pipes, maing threads, fitting,fixing etc. complete in all respect including cost of all coats of painting with approved paint in any positionabove ground.(Payment will be made on the centre line measurments of total pipe line including all specials. No separate payment will be made for assesories, specials. Payment for painting will be made seperately)a) For Exposed Work.PVC Pipes 50 mm dia |
| 135 | Supplying, fitting & fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD ‐ 1785 & threaded to match with GI Pipes as per IS : 1239 (Part ‐ I). With all necessary accessories, specials viz. socket, reducing tee, short piece etc. fitted with holderbatsclamps, including cutting pipes, maing threads, fitting,fixing etc. complete in all respect including cost of all coats of painting with approved paint in any positionabove ground.(Payment will be made on the centre line measurments of total pipe line including all specials. No separate payment will be made for assesories, specials. Payment for painting will be made seperately)a) For Exposed Work.PVC Pipes 50 mm dia |
