Renovation Of General Dining At Ada Hq ; 1 Demolishing brickwork in cement mortar manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material away from the site as per directions of Engineer-in-charge. 2 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials away from the site etc complete as per ADA instructions. 3 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete as per ADA instructions.Of area 3 sq. metres and below 4 Dismantling tile work in floors and roofs laid in cement mortar and disposing away from the site 5 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including disposing away from the site. complete as per ADA instructions. 6 Dismantling G.I. pipe including disposing away from the site as per directions of Engineer in-Charge. 7 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by manual or mechanical means, including loading, transporting, unloading away from the site or as approved by Engineer-in-charge. 8 Providing and laying of Cement Concrete 1:4:8 with 40 mm nominal size aggregates for flooring bed of 150mm thickness. including the cost of all materials, labour, compaction, levelling, at all levels, leads and lifts, curing, shuttering etc complete as per ADA instructions. 9 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters with 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screw set complete as per ADA instructions. 10 Providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) etc complete as per ADA instructions. 11 Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)etc complete as per ADA instructions. 12 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete as per ADA instructions. 13 Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color and shade, with necessary screws with two rubber stopper etc complete as per ADA instructions. 14 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws for 125mm etc complete as per ADA instructions. 15 Providing, fabricating & Installation of Full height Aluminum Partition including 02 Nos of doors. All the Vertical & Horizontal members shall be powder coated AL Sections of size 65 x 40 x 1.2 mm heavy gauge forming a grid as per drawing enclosed. The partition shall be rigidly fixed to wall / Ceiling / floor,etc for stability, the filler material shall be 05 mm thick clear glass or pin headglassfixed using AL snap fit clips, rubber gaskets,. etc complete as per samples available at ADA. 16 Providing and laying vitrified floor tiles of size 600x600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete as per ADA instructions. 17 Providing and laying vitrified floor tiles of size 600x600 mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc complete as per ADA instructions. 18 Size of Tile 600x600 mm (dadoing same as rough plastering) 19 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 20 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels with Granite stone slab colour black, Cherry/Ruby red and Area of slab over 0.50 sqm etc complete as per ADA instructions. 21 Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement.Ordinary cement finish using ordinary cement. 22 12 mm cement plaster of mix for Internal plastering with 1:4 (1 cement: 4 fine sand)etc complete as per ADA instructions. 23 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface with Water thinnable cement primer etc complete as per ADA instructions. 24 Providing & rendering OBD of lighter shade on wall /ceiling over a coat of wall primer of approved make, two are more coat to get even and neat finish, incl touch up putty, roller finish etc. complete all as per sample available at ADA and OEMs specification. 25 Wall painting with acrylic emulsion paint of approved shade to give an even shade with two or more coats and to provide finish same as shown in 3D view etc complete as per ADA instructions. (includes wallpaper/wall painting as indicated in rendered image) 26 Wall painting with acrylic emulsion paint of approved shade to give an even shade with two or more coats etc complete as per ADA instructions. (includes wallpaper/wall painting as indicated in rendered image) 27 French spirit polishing of approved shade with two or more coats including a coat of wood filler etc complete as per ADA instructions. 28 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture 29 Replacement of 5 mm thick clear glasses of size approximately (0.70m length x 0.10 m width), after removing the existing broken glasses including glass rubber gasket or lappam paste fixed to MS frame, etc complete All as per sample available in ADA 30 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 31 Providing and fixing of White Vitreous China Wash basin size 550x400 mm with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require etc complete as per ADA instructions. 32 Providing and fixing 100 mm sand cast Iron grating for gully trap. 33 Providing and fixing mirror of superior glass (of approved quality) of rectangular shape 1500x450 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing including all accessories etc complete as per ADA instructions. 34 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour with 600 mm long towel rail with total length of 645 mm, width78 mm and effective height of 88 mm, weighing not less than 190 gms including all accessories etc complete as per ADA instructions. 35 Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge etc complete as per ADA instructions. 36 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres),including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. 37 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm 38 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls including all accessories etc complete as per ADA instructions.(a) 20 mm nominal dia Pipes 39 (b) 25 mm nominal dia Pipes 40 Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (a) 75 mm nominal dia Pipes 41 (b) 110 mm nominal dia Pipes 42 Providing and fixing brass stop cock of approved quality with 15 mm nominal bore including all accessories etc complete as per ADA instructions. 43 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 with 15 mm nominal bore including all accessories etc complete as per ADA instructions. 44 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 with 15mm nominal bore including all accessories etc complete as per ADA instructions. 45 Providing and fixing PTMT grating of approved quality and colour with Circular type of 100 mm nominal dia including all accessories etc complete as per ADA instructions. 46 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms including all accessories etc complete as per ADA instructions. 47 P/FPVCNahanitrap (floortrap ) of approvedqualityandmake and confirming to ISI specificationsincluding construction ofCC : 1:2:4as directedby Engineer-in – charge. 48 Providing and Fixing C.P health fauset of approved quality conforming to IS:8931. 15mm nominal bore ( jaquar make cat no : ALD -CHR-573)as directed by engineer in charge. 49 Providing and fixing CPVCControl valve25 mm nominal bore as per the direction of Engineer in charge. 50 Providing and fixing CPVCControl valve40 mm nominal bore as per the direction of Engineer in charge. 51 Supply, Installtion& Commissioning of surface mounted (open type) 1X 36 watts 2ft x 2ft slim LED fitting to be fixed on ceiling by using anchor fasteners, incl termination on existing light point. 52 Supply, Installation& Commissioning of Recess mounted1X 36 watts 2ft x 2ft slim LED fitting to be fixed on False ceiling grid by including 3 core PVC insulating copper flexible wire connection on existing light point etc., 53 Supply & fixing on existing metal box Halym switch plate with required No. of switch / Electronic Fan regulator cuttings with modular switches to be fixed including inter connection etc., complete in all respect.a. 10” x 13” -15Nos switchesb. 17” x 14” -28Nos switchesc. 16” x 17” -25Nos switches 54 Supply & fixing of 200mm sweep (42”) Ceiling Fan WITH Electric Fan regulator andsuitable size GI pipe down rod of length 3ft from the ceiling, it should be painted with white color. 55 Supply & fixing of 36 watts 230 volts 4ft LED tube light to be fixed on walls. 56 Supply & fixing of 20 watts 230 volts 2ft LED tube light to be fixed on walls. 57 Supply & fixing of IP 54 UD wall light of 2 watts for wall decoration 58 Supply & Laying ofSub main wiring with PVC insulated FR stranded copper conductor of size 2.5 sqmm x 2 runs + 1 run of 1.5 sqmm for earth wire in 25 mm dia PVC casing N capping / conduit pipe complete with all fixing accessories like elbow, bent, tee etc complete. 59 Lighting point wiring, the point wiring includes 20mm thick PVC conduit pipe in ceing/wall concealed type, for main circuit 2.5 sqmm multi stand copper wire, for control wire 1.5 sqmm including switch, hylem plate, TW Box, ceiling rose etc., complete in all respect. 60 Supply, internal - wiring & installation of 01 No. of 6/16A power socket out let controlled by 10/20A single pole switch with indicator housed in PVC boxes, fixed at table top level as required by the client. (3 modular switch plate with box, white color). 61 Supply, Installation, Commissioning and Testingof 3TR Capacity Cassette type Air Conditioning System complete with accessories like indoor unit, outdoor unit, cordeless remote control and vidoflex insulation foam etc. including pressure testing, topping up of R410/407C gas, providing MS angle frame for mounting outdoor units (outdoor unit stand), Installation of Ac by inter connecting the suction & dischargepipe, laying the drainage pipe fixing the indoor unit & fixing the outdoor unit on the frame with necessary support & clamp, testing and commissioning units.Detailed specification of 3TR Cassette Type (Refer RFQ document)• Nominal cooling capacity• BEE Start Rating• Power supply• Fan Type• Condensate drainage• Air Filter• Air Flow Volume• Noise Level 62 Supply of Suction & Discharge pipe Size 5/8” Copper for Suction & 3/8”for discharge to inter connect indoor & outdoor with necessary vidoflex insulation. 63 Supply and fixing of 1” dia PVC pipe including necessary fixing accessories for Drain pipe line. 64 Supply and Laying of 2.5 sq mm 6 Core PVC Flexible copper cable through PVC pipe to individual A/c indoor unit to outdoor unit including necessary fixing accessories. 65 Supply & Wiring 4 x 4.0 Sq mm FRLS copper wire + 1x1 run 2.5 Sq mm copper wire for earthling including conduits or casing N capping with necessary accessories 66 Supply and fixing of 3” PVC (Box Type) casing & capping for routing copper piping and drain piping. (Wherever required) 67 Supply and fixing of MCB 4 Pole:32 Amps along with industrial socket plug & box including necessary termination of wires, testing and commissioning of circuit. 68 Provision and fixing of 4 Seater table of size shall be 1100 Width mmx 1100 Depth mmx 750 Height mm. Top shall be 25 mm thick base material shall be 25 mm thick solid wood of approved shade. The Understructure shall made up of 60 x 45mm solid wood frames. The work includes hardware, SS machine screws and necessary hardware. 69 Provision and fixing of 8 Seater table of size shall be 2200 Width mmx 800 Depth mmx 750 Height mm.Top shall be 25 mm thick base material shall be 25 mm thick solid wood of approved shade. The Understructure shall made up of 60 x 45mm solid wood frames. The work includes hardware, SS machine screws and necessary hardware 70 The seat and back are made uo injection moulded high impact strength polypropylene polymer compound with indoor grade UV Resistance. The Powder coated (DFT50+ microns) welded tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tube. The powder coated welded beam M.S. Structure is made from 5.08+/-0.03cm x0.16x +/- 0.0128 cm. The Shoes are made of high impact strength polypropylene polymer compound with indoor grad UV Resistance and pressed fitted with tubular frame. The Armrest made of high impact strength polypropylene polymer compound with indoor grad UV resistance and assembly over the tubular frame. The L Shape Desket is made of 1.8+/- 0.05cm thk . pre - laminated Particle board with 0.2+/- 0.05 cm thk injection polypropylene polymer all aroundFront& Back ( outer Dimension - 31.5+/-(W)x 47.0+/- 0.1 cm (D)) An Upholstry cover be retro fitted on seat and back . the seat cover is made from high abrasion resistance with fabric with foam laminated and 2.5cm PU Foam insert. the back cover is made from High Abrasion Resistance fabric with foam lamination and 0.1 cm PU foam. 71 Provision and fixing of Reception table of size shall be 2000 Width mmx 800 Depth mmx 750 Height mm (1000mm full height).Top shall be 25 mm thick ply with approved shade laminate. The Understructure shall made up of 18mm thick ply wood with approved shade of laminate. All the exposed surface should be 1mm laminate and the edges with wooden beeding. The work includes hardwares, SS Tube, locks, Hinges, SS machine screws and necessary hardwares as per the drawing.
