|
| 1 | Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed. |
| 2 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes or for laying of cable or pipe, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loosesoil complete all as specified &directed |
| 3 | M&L for Cement concrete in foundations, filling and mass concrete (PCC) Type D2 1:4:8 (40 mm graded aggregate) etc complete all as specified & as directed |
| 4 | M & L for Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 5 | M&L for TMT bars 5mm dia & over upto and over 10mm dia in stirrups spacers & binders etc complete all as specified and directed. |
| 6 | M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for foundation including rafts, footings, foundation beams, plinth beams, bases for columns, etc, complete all as specified and directed. |
| 7 | M&Lfor RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for columns, pillars, piers, posts & struts etc all as specified and directed. |
| 8 | M&L for RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate) for beams, cantilevers, bressumers, lintels over 1.5m span etc all as specified and directed. |
| 9 | M&Lfor RCC Nominal Mix type B1 1:2:4 (20mm graded aggregate)for slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slab and in shelves and the like etc complete all as specified and directed. |
| 10 | M&L forflat form work to sides of concrete foundations, footing bases of columns, raft and raft beams, sides and soffits(if any) of foundation and plinth beams and similar work, veritical or to batter in rough finished surfaces of concrete complete all as specified & all as directed. |
| 11 | M&L for form work to sides of pillars posts, struts piers, columns & stanchions square rectangular or polygonal fair finished surfaces in shape in rough finished surfaces of concrete complete all as specified & as directed. |
| 12 | M&L for flat form work to sides and soffits of floors or roof beams beam, haunchings, girders, bressumers, lintel, cantilevers, shelves including supports, overhangs etc also splays between floors and beams in rough finished surfaces of concrete etc complete all as specified and directed. |
| 13 | M&L, for Form work to soffits of suspended slab such as roof slabs, floors slabs, landing & similar work not exceeding 200 mm thick (Horizontal or sloping) etc in rough finished surfaces of concrete complete all as specified and directed. |
| 14 | M&L for Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete raillings, opening in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide in rough finished surfaces of concrete complete all as specified and directed. |
| 15 | M&L for 75 mm thick cement concrete 1:4:8, type D2(40mm graded stone aggregate) assub base complete all as specified and directed. |
| 16 | M&L for brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4. complete all as specified and directed. |
| 17 | M & L for brick work with fly ashbricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed. |
| 18 | Returning, filling in, including spreading, levelling, watering and well ramming in layer not exc 25cm in soft/loose soil complete all as specified and directed. |
| 19 | Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. |
| 20 | M&L for Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surfaceetc complete all as specified and directed |
| 21 | M&L forrendering 15mm thick on fair faces of brick work or concrete surface in CM 1:4 surface finsihed even and smooth without using extra cement. complete all as specified and directed. |
| 22 | M&L for rendering 15mm thick on fair faces of brick work or concrete surface in CM 1:6, surface finsihed even and smooth without using extra cement. complete all as specified and directed. |
| 23 | M&L for rendering 10mm thick in CM 1:4 on ceiling surface, surface finsihed even and smooth without using extra cement.complete all as specified and directed. |
| 24 | M&L for preparation of new plastered surfaces and applying two coats cement base paint on wall i including 3mm thick wall care putty complete all as specified and directed. |
| 25 | M&Lfor preparation of new ceiling surfaces and applying three coat of white wash complete all as specified and directed. |
| 26 | M&L forpreparation of new plastered surfaces of wall and applying two coat of oil emulsion distemper including 3 mm thick wall care putty complete all as specified and directed. |
| 27 | M&Lfor non skid coloured ceramic tiles 7 to 8mm thick(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc laid over and including 15 mm thick screed bed in CM 1:6 and set and jointed in neat cement slurry and pointed in white or colour cement to matchcomplete all as specified and directed. |
| 28 | M&L for glazed ceramic coloured tiles in vertical surfaces 450 x 350 x 7mm thick laid over and including 15 mm thick rendering in CM 1:6 as backing coat to received tiles and set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 29 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, as per specification complete all as specified and directed. |
| 30 | S&F Factory made solid panel pvc doorshutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined to-gether with solvent cement as per specification complete all as specified and directed. |
| 31 | S&F Aluminium, anodised, barrel tower bolts of extruded section of 150 mm long complete all as specified and directed. |
| 32 | S&F Aluminium handles, cast type, anodised of 150 mm size. complete all as specified and directed. |
| 33 | S&F Butt hinge,Stainless steelof 100 mmsize complete all as specified and directed. |
| 34 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple complete all as specified and directed. |
| 35 | S&F 3.00mm thick sheet figured glass, pin head type and glazing with oil putty in squares n exc. 0.5 sqm in each pane complete all as specified and directed. |
| 36 | M & L for Preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 37 | S&F steel ventilator with to hung shutter including hinges, steel peg stay complete all as specified and directed. |
| 38 | S&FSS chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 39 | S&F600 x 450 mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 40 | S&F bib taps cast copper alloy 15mm size, crutch or butterfly handle, screwed down, screwe for iron pipe chromium plated complete all as specified and directed. |
| 41 | S&F tubes, medium grade, 20mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 42 | S&F tubes, medium grade, 25mm bore, galvanised with all fittings complete to walls and ceiling or laid in floors complete all as specified and directed. |
| 43 | S&F brass chromium plated angle valve 15mm size complete all as specified and directed. |
| 44 | S&F 10 litres capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle complete all as specified and directed. |
| 45 | S & F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 46 | S&F in repair vitreous china ware EWC combined pattern complete with internal fittings complete all as specified and directed |
| 47 | S&F in repairCP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed. |
| 48 | S&F rotational moulded polyethyleneWHITE clour water storage tank(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 litres capacity including suitable brass float valve.complete all as specified and directed. |
| 49 | S&F vitreous china wash down water closet pan(pedestal patern), white including fixing bolts and connection to drain pipe or out going pipe but exclduing flushing cistern and flush pipe.complete all as specified and directed. |
| 50 | S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 51 | S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps. complete all as specified and directed. |
| 52 | S&F PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 53 | S&F PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, fixed to walls complete including faixing clamps. complete all as specified and directed. |
| 54 | S&F PVC(SWR) junction single, (Single T) equal or unequal provided with access door110mm bore complete all as specified and directed. |
| 55 | S&F PVC(SWR) junction single, (Single T) equal or unequal provided with access door75mm bore complete all as specified and directed. |
| 56 | S&F PVC(SWR) bends 110mm bore any radius.complete all as specified and directed. |
| 57 | S&F PVC(SWR) bends 75mm bore any radius. complete all as specified and directed. |
| 58 | S&F PVC connections 15mm size, 450mm long with PTMT nuts complete all as specified and directed.. |
| 59 | M&L for 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed. |
| 60 | M&L for cement concrete 1:3:6, type C2 concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in 150mm dia pipe complete all as specified and directed. |
| 61 | M&L forconstruction ofSoakage well by excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size, complete of size2.40 M dia X 3.00M effective depth. complete all as specified and directed. |
| 62 | Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed. |
| 63 | M & L for cement concrete 1:2:4 type B2 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed. |
| 64 | M&L forbrick work withfly ash bricks straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed. |
| 65 | M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded stone agg)as inSub base of flooring complete all as specified and directed. |
| 66 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including notching, drilling, fittings, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing fittings angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing conf to Fe-410-w (Gde-E -250) quality A complete all as specified and directed. |
| 67 | S & F pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer\"s instructions and height of buildings upto 12mtr with out stair case complete all as specified and directed. |
| 68 | S & F pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with hot dip galvanised self dirilling and self tapping screws neoprene and EPDM washers complete all as specified, directed and as per manufacturer\"s instructions and height of buildings upto 12mtr with out stair case complete all as specified and directed. |
| 69 | M&L for 20-25mm thick machine cut kota stone slab as in flooring, steps of stair(treads),laid over and including 20 mm thick screed bed in CM 1:6 and set with neat grey cement slurry andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 70 | M&L for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in cement mortar 1:4, set in neat grey cement slurry and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed. |
| 71 | M&L for preparation of new or previously untreated steel surfaces of any description exceeding 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 72 | M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as incoping, bed block, kneels, apex stones etcincluding weathering slightly rounded or chamfered including form work complete all as specified and directed. |
| 73 | M&L for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed. |
| 74 | S&F Mild steel hydraulic automatic plastic bailing machine of load capacity 75Ton including all electrical fittings all as per authorize ISO certified company complete all as specified and directed. |
| 75 | S&F Mild steel Semi automatic Glass crushing machine load capacity 500kg/hr including all electrical fittings all as per authorize ISO certified company complete all as specified and directed |
| 76 | S&F Mild steel hydraulic automatic tins bailing machine load capacity 100ton including all electrical fittings all as per authorize ISO certified company complete all as specified and directed |
| 77 | S&F Mild steel hydraulic semi automaticPaper and cloth shreeding machine load capacity 800kg/hr including all electrical fittings all as per authorize ISO certified company complete all as specified and directed |
| 78 | Demolition ofbrick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc.complete all as specified and directed. |
| 79 | Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises. complete all as specified and directed. |
| 80 | Taking down of chowkhats or frame with shutters (without taking off shutters from the frames) n.exc 1.50 Sqm each. complete all as specified and directed. |
| 81 | Taking up or down steel tubing and connection 15 mm bore pipe complete all as specified and directed. |
| 82 | S&F CP brass soap dish complete all as specified and directed. |
| 83 | S & Fin repar Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed. |
| 84 | S&F in repair vitreous china squatting pan ‘Orrisa pattern’ size 580 x 440 mm white with integral foot rest including replacement of ‘P’ or ‘S’ trap lime concrete bedding and making good floor complete all as specified and directed. |
| 85 | S&F in repairfor CP Health Faucet brass body with wall hook and one meter SS braided rubber hose pipe complete all as specified and directed. |
| 86 | S&F in repair rotational moulded polyethyleneWHITE clour water storage tank(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, 500 ltr capacity including suitable brass float valve. complete all as specified and directed. |
| 87 | S&F in repair Vitreous China wash basin including pedestal, white, flat back, size 550 x 400 mm, including fixing acessories like galvanised brackets & rag bolts,32 mm CP waste coupling complete all as specified and directed. |
| 88 | S&F in repair ,PVC(SWR) floor trap, 75/110mm bore, plain with grating including jointing with solvent cement. complete all as specified and directed. |
| 89 | S&F in repair PVC(SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors and walls complete including faixing clamps. complete all as specified and directed. |
| 90 | S&F in repair PVC(SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, fixed to floors and walls complete including faixing clamps. complete all as specified and directed. |
| 91 | M&L in repair 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed |
| 92 | Taking down cementplaster of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 93 | S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 25 mm dia.fixed in repair) complete all as specified and directed. |
| 94 | Taking down carefully any type, battens or conduit point wiringwith or except conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed |
| 95 | M&L for point wiring with 1.5 Sqmm (nominal cross section area) single core, multi stranded PVC insulated, sheathed copper conductor, FRLS cable in and including in rigid pvc conduit 20 mm dia or higher medium grade ISI marked complete with all PVC Conduit accessories / fittings and sunk pressed (1.2 mm thick) steel terminal switch boxes with 3 mm thick plastic laminated hard glossy surface sheet top cover, including earth wire continuous of PVC insulated, sheathed 1.5 Sqmm copper conductor, PVC insulated connected to all fittings, sunken boxes and common earth, earth dolly. Plastic sheet screwed with brass screws, cup washers complete all as specified and directed for the following:- |
| 96 | One light/exhaust/ fan/ Bulb/Bldg security light point controlled by one, one way switches 5/6 Amps. |
| 97 | One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch. |
| 98 | One 3 pin 5/6 Amps socket outet point on same board, controlled by one, one way 5/6 Amps switch complete all as specified and directed |
| 99 | All as described in Ser item No. 98 here-in-before but using 2.5 sqmm copper conductor for with 2.5 sqmm earth wire for one 15 amps socket outlet on independent board complete all as specified and directed |
| 100 | S & F Switch piano flush button single pole one way 5/6 amp complete all as specified and directed. |
| 101 | S & F Socket outlet 3 pin, 6 Amps, flush type complete all as specified and directed. |
| 102 | S & F Switch piano flush button single pole one way 15/16 amps complete all as specified and directed |
| 103 | S & F Socket outlet 3 pin, 16 Amp, flush type complete all as specified and directed |
| 104 | S & F ceiling rose, surface type, bakelite, 65 x 50 mm, three terminal complete all as specified and directed. |
| 105 | S & F LED lamp 9/10 W 6500k,240V complete all as specified and directed. |
| 106 | S & F lamp holder insulated body with back plateanodised 100 x 100 mm pressed steel box flush to the wall with 3 mm thick backlite cover complete all as specified and directed. |
| 107 | S & FLED tube light fitting T/5 surface mounting poly carbonate 240 volts 20 watts, 6500K complete all as specified & directed. |
| 108 | S & F Building security light fitting 1 x 35W LED type, drawn through and including GI bracket of size 25 mm dia bore light grade 1.4 meter long, bend to shape including MS clamps made out of flat iron of size 32 x 4 mm - 02 Nos and necessary nuts, bolts, washer as required complete all as specified and directed. |
| 109 | S&F XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volt grade cross sectional area of 10 sqmm 2 core complete all as specified and directed |
| 110 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in soft/ losse soil complete all as specified and as directed. |
| 111 | Supply and spreading clean fine dry river sand for cushioning of under ground cable/ cable duct complete all as specified and as directed.Note: Only punned thickness shall be measured for payment purpose complete all as specified and directed |
| 112 | Supply and laying fly ash brick for cable protection, length of brick shall be laid across the length of cable) complete all as specified and directed. |
| 113 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointin soft/ losse soil complete all as specified and as directed. |
| 114 | M & L for GI light grade tubing 40mm dia laid in trenches, road crossing pasing through pipe or laid in wall/pole complete all as specified and directed |
| 115 | S&F sheet metal enclosure single pole & neutral for 240 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door complete all as specified and directed |
| 116 | S&F MCB single pole 240 volt 6 to 32 amps 10 KA complete all as specified and directed |
| 117 | S&F Isolator, DP (Double Pole), AC, 240 volts, B series capacity40 Ampsand making connections complete all as specified & directed. |
| 118 | Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipemedium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completioncomplete all as specified and directed. |
| 119 | S&Fsocket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed |
| 120 | S&F socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed |
| 121 | S&F decorative wall mounted LED tube light fitting 20 watt with polycarbonate housing with all accessories and fixing material complete all as specified and directed. |
| 122 | S&F 35W LED building security lightenergy saving & environmental friendly long life luminaire with high power LEDs as light source and electronic driver including security light brackets of 32 mm dia GI pipe medium grade upto 1.2 mtr long bend to shape at 100-120 degree including flat iron clamps and Suitable nuts and bolts grouted in wall including all material required for fitting all as specified and directed |
| 123 | S&Fceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified & directed |
| 124 | M&L for sub main wiring with 06 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 06 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing including taking down old u/s submain wiring complete all as specified & directed. |
| 125 | S & F sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces including taking down old u/s DB\"s complete all as specified and directed |
| 126 | S&F MCB, SP, AC, 240 volts \"C\" series capacity of 06 to 32Amps, 10kA and making connections complete all as specified & directed. |
| 127 | S&F Isolator, DP (Double Pole), AC, 240 volts, B series capacity 32 Ampsand making connections complete all as specified & directed. |
| 128 | S&FTPN DB, 4 way, 415 V, double door type suitable for mounting incoming and outgoing MCB’s double pole/single pole,complete all as specified and directed. |
| 129 | S&F four pole Isolator ,415 V, 63A, and making connections complete all as specified & directed. |
| 130 | S&F LED tube light fitting T/5 surface mounting poly carbonate batten 240 volts 10 watts, 6500K complete all as specified & directed. |
| 131 | S&F Exhaust fan steel bodyAC single phase 230/240V size 300 mm sweep with blades, and louvers, including making hole in the wall of required size, complete all as directed. |
