Tender For Testing, Checking And Repairing Of Automatic Fire Detection And Fire Alarm System For Nib Room At 1St Floor, Telephone Bhawan, Bhubaneswar.( Sh :- Testing, Checking, Repairing & Re-Arrangemnt Of Afd & Fa System At 1St & 2Nd Floor), bhubaneswar-Odisha

Testing, Checking and repairing of Automatic Fire Detection and Fire Alarm System for NIB room at 1st Floor, Telephone Bhawan, Bhubaneswar.( SH :- Testing, Checking, repairing & re-arrangemnt of AFD & FA system at 1st & 2nd Floor); 1 Supply, installation, testing and commissioning of UL listed, CE certified 2 wire conventional Photo electric / Ionization type Smoke detector with base (Blinking LED type) made of ABS plastic with all accessories, suitable for operation on 24v DC, internal protection class: IP23, dual pulsing LED with 3600 visibility, relative humidity:≤95%; non-condensing and EN54 compliance of approved make etc. as required. (Make- Apollo / GST/ Honeywell / System sensor) 2 Supply, installation, testing and commissioning of electronic hooter cum speaker made of 16/18SWG CRCA sheet duly powder coated with PO red colour, output not less than 80db @25mtr, LMT with adjustable sound output of 2.5-watt,5-watt, suitable knock out for cable entry from top suitable for operation on 100/70-volt RMS AC supply etc. as required. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni) 3 SITC of manual push button station (pill box) Manual Call Point in MS Housing for Conventional Fire Alarm System with glass for breaking up in case of fire and hammer with chain etc. (Make- Apollo / Honeywell / GST/ system sensor/ Ravel /Agni) 4 Supply and laying offollowing size FRLS PVC insulated and PVC sheathed copper conductor unarmoured heavy dutyflexible cable on surface/recess for fire alarm devices & providing power supply to sounder cum strobes etc. as required. (ISI) 5 2 CORE X 1.5 SQ MM 6 4 CORE X 1.5 SQ MM 7 Supplying and making indoor end termination with brass compression gland and copper lugs for 2 core, 1.5 Sq. mm size of PVC insulated and sheathed/XLPE copper conductor cable of 1.1 KV grade as required. 8 Supplying and fixing of 4-way PVC brass lead connector for connection of existing 2x1.5sq mm Cu. Cond. & 4x1.5 sq mm Cu Cond. etc as required. 9 S/F ABS round box / MS Boxon ceiling for fixing the detectors etc. as reqd. 10 SITC of12 Volt maintenance free battery of not less than 26 AH capacityetc. as requd. 11 Dismantling the existing 8 Zone Microprocessor type Fire Alarm panel from 2nd Floor i/c disconnection of all outgoing cable , marking all the cable with their zones i/c shifting the same to 1st floor for installtion etc complete as required. 12 Re-installation of the above 8 Zone Microprocessor type Fire Alarm panel at 1st Floor for accommodate the fire detection system for NIB equipment room, NGN cooridor , old OCB equipment room etc i/c reconnection of fire cable with their zone marking etc complete as required. 13 Re-installation of the above existing 16 Zone Microprocessor type Fire Alarm panel at 2nd Floor for accommodate the fire detection system for MUX /OTN equipment room, Lease CKT room, One Network room, cooridor , Elect. Panel room, store room etc i/c reconnection of fire cable with their zone marking etc complete as required. 14 Re-arrangement i/c modification of fire cable for connecting in the fire panel , proper fixing of cable after dismantling from existing route i/c re-connection of the same with new GI shaddles , re-arranging of the old cable etc complete as required.(1ST FL.) 15 Re-arrangement i/c modification of fire cable from 2nos Old fire panel & connecting the same in 4-way connector , proper fixing of cable after dismantling from existing route i/c re-connection of the new cable & old cable at new existing fire paneletc complete as required.(2ND FL.) ) 16 Supplying & fixing of wall mounted auto glow Signage Fire Exit Sign Board 3mm PVC Sheet with high Glow intensity in total Darkness. (Red and Green colour with exit symbols as per requirements) 17 Checkingof all old existing detector after dismantling from the existing position i/c cleaning of the old working detector and re-fixing of the working onein the same position i/c rectification of minor faults, testing for proper functioning etc. complete as required. 18 Testing, checking of Automatic Fire Detection, Fire Alarmsystem of NIB , Cooridor & Old OCB roomcomprising ofFire control panels , Fire Detectors , Manualcall points, Electronic Hooters etc.after rectification of fault byfixing of new items and required repairing workof AFD system i/c arranging of testingin the presence of Building Incharge/ Site incharge for proper functioning etc. complete as required.

INR 590 /-

INR 2681.0 /-

INR 1.34 Lakhs /-