Tender For Civil Works - Annual Repair And Maintenance Of To 2 Nos Staff Quarters In M/W Campus Gangapurcity.; 1 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 2 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) 3 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. 4 Kiln seasoned and chemically treated hollock wood/hard wood. 5 30 mm thick shutters 6 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to40 mm thick : 7 Ply wood 5 ply, 9 mm thick : 8 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS1328 BWR Type 9 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : 10 With cement mortar 1:4 (1cement: 4 coarse sand). 11 Renewing glass panes, with putty and nails wherever necessaryincluding cost of all nails, screws etc but exluding labour cost for fixing. 12 Glass panes of 4mm thick. 13 Providing and fixing ISI marked oxidised M.S. sliding door bolts withnuts and screws etc. complete : 14 250x16 mm 15 Providing and fixing ISI marked oxidised M.S. tower bolt black finish,(Barrel type) with necessary screws etc. complete : 16 200x10 mm 17 150x10 mm 18 Providing and fixing ISI marked oxidised M.S. handles conforming toIS:4992 with necessary screws etc. complete : 19 125 mm 20 Providing and fixing on wall face unplasticised Rigid PVC rain water/soil waste pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 21 110 mm diameter 22 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 23 Coupler110mm 24 Single tee with door110x110x110 mm 25 Bend 87.5°110 mm bend 26 Neat cement punning. 27 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 28 White washing with lime to give an even shade : 29 Old work (two or more coats) . 30 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 31 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. 32 One or more coats on old work. 33 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 34 One or more coats on old work. 35 Finishing walls with water proofing cement paint of required shade : 36 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 37 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 38 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 39 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : 40 W.C. pan with ISI marked white solid plastic seat and lid 41 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 42 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 43 10 litre capacity - White 44 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 45 Semi rigid pipe32 mm dia 46 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 47 Rectangular shape 453x357 mm 48 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 49 20 mm nominal outer dia .Pipes. 50 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 51 20 mm nominal outer dia .Pipes. 52 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 53 Providing and fixing PTMT bib cock of approved quality and colour. 54 15 mm nominal bore, 122 mm long. Weighing not less than 99 gms. 55 Providing and fixing PTMT stop cock of approved quality and colour. 56 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 57 Providing and fixing PTMT pillar tap of approved quality and colour. 58 15 mm nominal bore, 125 mm long. Weighing not less than 120 gms. 59 Providing and fixing PTMT grating of approved quality and colour. 60 Circular type. 61 125 mm nominal dia with 25 mm waste hole. 62 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 63 20 mm nominal bore, 152 mm long. Weighing not less than 440 gms. 64 Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. 65 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 66 15 mm nominal bore with 45 cm length. 67 Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 68 20mm nominal bore. Weighing not less than 62 gms. 69 Engaging beldar as and when required on call basis(whole day) as per requirement and to join the departmental sewer man when single person is not able to attend severe choking complaint, and also may be used in cleaning sweeping of toilet etc.(Acid, bamboo, cleaning rod ,ladder, rope will be provided by the agency.) 70 Repairing ofdoors/windows etc by taking out, repairing and refixingall complete as per direction of EIC.MS sections/Sheet etc shall be paid for separately. 71 Extra for providing and mixing URP of Doctor Fixit in plaster work in proportion recommended by the manufacturers. 72 Providing and fixing CPVC Union in CPVC pipe including cutting and pasting the pipe and making good etc. complete 73 25 mm nominal outer dia .Pipes. 74 Providing and fixing CPVC Gate valve in CPVC pipe including cutting and pasting the pipe and making good etc. complete 75 25 mm nominal outer dia .Pipes. 76 Providing and fixing CPVC specials FTA/MTA/brass fittings in CPVC pipe line wherever requiredincluding cutting and pasting the pipewith cement solvant etc. all complete 77 Removal of blockage from sewer line from one manhole to another manhole by rodding etc. i/c cleaning the line complete and disposal of malba outside the municipal limitas per direction of Engineer-In-Charge complete. 78 Cleaning of cholked sewer manhole/WC including removal of rubbish,garbage and its disposal to an approved municipal dumping ground all complete as per the directions of Engineer-in-Charge.
