|
| 1 | Excavation over areas n. exc 1.5 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavation over areasexc 1.5 m depth and n. exc 3.0 m deep and getting out in soft/loose soil complete all as specified and as directed. |
| 3 | Excavation in post holes (or similar holes) each not exceeding0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in soft/loose soil complete all as specified and directed. |
| 4 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting outin soft/loose soil complete all as specified and as directed. |
| 5 | Excavation in trenches n.exc 1.5 M wide and n. exc 1.5 M depth and getting out in soft/loose soil getting out complete all as specified and as directed. |
| 6 | Material and labour for precastPCC 1:3:6 Type C1 using 20 mm graded aggregate solid block masonryexceeding 10 Cm width(with plain or interlocking joints as directed), built in cement mortar 1:6 all as specified and as directed. |
| 7 | Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water, remove dust, debries/rubbish etc. complete all as specified and as directed. |
| 8 | Material and labour for rendering 10mm thick in Cement Mortar 1:6 on fair faces of brick walls or on concrete surfaces, finished even and smooth,without using extra cement complete all as specified and directed. |
| 9 | Material and Labour for rendering 10mm thick on fair faces of concrete work in CM 1:4,using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound shall be measured separately |
| 10 | Material and Labour for cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and as directed. |
| 11 | Supply only integral water proofing compound all as specified and as directed. |
| 12 | Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats ofdistemper oil emulsion of approved shade/tint over a coat of compatiable priming paint complete all as specified. |
| 13 | Material and Labour for preparing of new ceiling surfaces of any description and applying two coats of acrylic distemper, white or tinted over a coat of primer complete all as specified and as directed. |
| 14 | Materialand Labour for preparation ofplastered surfaces and applyingtwo coats of weather proof exterior emulsion paint over a coat of primer complete all as specified and as directed. Make: Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger |
| 15 | M & L Preparation of old distempered and paintedsurfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces. |
| 16 | Material and labourfor preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Material and labour for one coat ofwhite washon old ceiling surfaces including necessary preparation all as specified and as directed |
| 18 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) remaining serviceable tiles to stores and rubish off the premises all as specified and as directed. |
| 19 | Material and labour for light shadevitrified ceramic tiles 8-10 mm thick polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) as in floor etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.NOTE: The Colour,shade and pattern shall be approved by the GE during execution work. No extra cost sahll be allowed for removing and refixing and necessary cutting of door etc if any required during execution of work. |
| 20 | Material and labour for light shadevitrified ceramic tiles 8-10 mm thick polished area of each tiles exceeding 0.36 Sqm but not exceeding 0.42 sqm of any shade and any pattern (Pattern consists combination of two or more tiles ) asin vertical surfaces like skirting / dado etcjointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 10mm thickbacking coat in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed.NOTE: The Colour,shade and pattern shall be approved by the GE during execution work. No extra cost sahll be allowed for removing and refixing and necessary cutting of door etc if any required during execution of work. |
| 21 | Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile of size 400 x 400 x 7 to 8mm thick in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work. |
| 22 | Material and Labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified. |
| 23 | Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished including moulding,grindingect), and laidoverin steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like inover and including 15 mm thick backing coat in CM 1:4 andpointing in white cement or colour cement(1:2) using marble dust with admixture of pigment to match withshade of granite complete all as specified and directed. NOTE: Material and Labour for rounding to edges of Granite slabs shall be measured and paid separately. |
| 24 | Material and Labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed |
| 25 | Material and labour for Moorum filling in floors/pavings obtained from outside MD land, laid in layers not exceeding 15 cm thick, spread, levelled and rammed/rolled including watering to required level and gradient all as specified and as directed. |
| 26 | Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed. |
| 27 | Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using40 mm graded stoneaggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork, complete all as specified and as directed. |
| 28 | Material and labour for plain cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed. |
| 29 | Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting& fixing in opening as per specification & drawing complete all as specified and directed. |
| 30 | Supply and Fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frameat site as per specification and drawing given in SSR Part-II complete all as specified and as directed. |
| 31 | Supply and fix aluminium powder coated with with minimum powder coating thickness of 50 micron frame & shutters for doors,windows, ventilators with one or more rebates with joint clip and using rubber beading etc complete all as specified and directed.Note:Glass panel/particle board panel filling shall be measured and paid separately. |
| 32 | Supply and fix Powder Coated aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum coating of grade AC 15) of DG 102 design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 33 | Supply and fix18/19 mm thick prelaminated particle board, interior grade, pr lamnated one side with decorative choice lamination other side balancing white lamination fixed with screws to frame work complete all as specified and as directed. |
| 34 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.Make: SANDHU, EVEREST |
| 35 | Material and Labour for pre-laminated particle board 12 mm thick, interior grade, prelaminated both side with decorative choice lamination, fixed with screws in timber frame work complete all as specified and directed. |
| 36 | Supply and Fixing 5.5 mm thick sheet glass ordinary quality in square not exceeding 0.5 Sqm in each pane for fixing in aluminium joinery with rubber gasket as specified and as directed. |
| 37 | Supply and Fixing 5.5 mm thick frosted/ tinted sheet glass ordinary quality in square not exceeding 0.5 Sqm in each pane for fixing in aluminium joinery with rubber gasket as specified and as directed. |
| 38 | Supply and fix for stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directedincluding takig down old unservicable one. |
| 39 | Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof/wall coverings complete all as specified and as directed. |
| 40 | Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer\"s instructions through specialist agency complete all as specified and as directed. |
| 41 | Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer\"s instructions throughthrough specialist agency and complete all as specified and as directed. |
| 42 | Supply and Fixing Mild steel work such as joist, channel, angle or tee section fixing independentlywithout connecting plates, cut to ordinary length ie, within 20mm of the length indicated conforming to Grade E-250, Fe 410 W quality B all as specified and as directed. |
| 43 | Supply and fix rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats conforming to Fe-410W(Gde E-250) quality Acomplete all as specified and as directed. |
| 44 | Material and labour for applying two coats of synthetic enamel paint over one coat ofred oxide primer on new steel surfaces over 10 cm wide or girth including preparation of surface etc., complete all as specified and directed. |
| 45 | Taking down steel tubing and connectionscleaning for refixing or removal to store of 15 mm dia with all fitting complete all as specified and as directed. |
| 46 | Taking down steel tubing and connectionscleaning for refixing or removal to store of 20 mm dia with all fitting complete all as specified and as directed. |
| 47 | Supply and fix Unplasticised PVCpipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe 20mm bore complete all as specified and as directed. |
| 48 | Supply and fix plug type brass bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 49 | Supply and fix in repair Overhead shower160mm square shape single flow with air effect (ABS body & Face plate stainless steel with Rubit Cleanign System) including Shower Arm ø20mm & 300mm Long Round Shape with 90˚ Bend for Wall Mounted Showers with Stainless Steel Flange complete all as specified and as direccted.Make: Jaquar Code OHS-1605 and SHA-479L300S or equivalent inParryware/Hindware/CERA |
| 50 | Supply and fix stop valves/angle cock, 15mm bore, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 51 | Supply and Fixvitreous china wash down water closet Pedastal patternwhite (excluding flushing cistren ) including trap set, seat cover and fixing of flushing cistern, brackets, flushing pipeetc, etc. with\"P\" or \"S\" trap, making good the floor to match with existing floor complete all as specified and as directed. |
| 52 | Supply and fix10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified . |
| 53 | Supply and fixing in repairs Vitreous China half stall urinal flat back, white , of size 580mm x 380mm x 350mm complete with chromium plated waste fittings including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing arround urinal back in cement, (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed. |
| 54 | Supply and fix Vitreous China Ware under counter Wash hand basin white, of size 190mm x 550mm x 430mm fixed in counter excluding pillar tap, chain and plug and porcelain stopper but including 32mm brass chromium plated waste fitting, PVC connection a pair of cast iron bracket duly painted including cutting and pinning in ends or errecting stand complete all as specified and as directed.Make: Jaquar Code FLS-IVY-0401 or equivalent inParryware/Hindware/CERA |
| 55 | Supply and fixing 6 mm thick bevelled edge looking mirror of size 600 x 900 mm including all fixing accessories,fixed to wooden plugs with CP Screws and cup washersall as specified and as directed. |
| 56 | Supply and fixing PVC connections 15mm size for Hot and cold water connection with rubber washer & brass nuts, ISI marked of length 600mm complete all as specified and directed. |
| 57 | Supply and fixwaste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed. |
| 58 | Supply and FixPVC (SWR) 110 mm dia of outlet, floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 59 | Supply and fix in repair soap dish vitireous china white 160x160x90mm (Approximate)complete all as specified and as directed. |
| 60 | Supply and fix towel rail, 600mm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minmum weight 190 Gms)all as specified and directed. |
| 61 | Supply and fix PTMT grating 100mm dia with or without waste hole complete all as specified and as directed. |
| 62 | Supply and fix 15 mm bore pillar taps cast copper alloy with capstan headsfancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and as directed. |
| 63 | Supply and fix 1000 litres capacity tripple layer, rotational molded, polythene water storage tank with cover (Cylindrical vertical with closed top),colour white ,hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 64 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as directed. |
| 65 | Supply and fix anodised aluminium snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main Tee of size 23.50mmx36.50mmx1.50mm, cross Tee of size 23.50mmx23.50mmx1.50mm and wall angle of size 36.00mmx25.00mmx1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in position with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60 mm long and expansion hold fasteners 40 mm long in soffit of slab/walls complete all as specifed and as directed including provision of 12mm thick Moisture Resistant Gypsum board 600mmx600mm size, fixed in ceiling, flat or sloping andapplying two coats of acrylic distemper over a coat of primer complete all as specified and directed.Note :- Rate quoted above shall be deemed to include for making holes, cutting chassis if any required and making good to existing walls in cement mortar 1: 3 to match with existing surface finish as directed at site. |
| 66 | Supply and fix PVC wall panelling of surface laminatedany pattern and any shape of 7 to 10mm thicknessand any colourat any position inclusive of solvent cement and fixing at over a grid of PVC frame installed on the wall, which works as a base to install the PVC wall panels. Each panel have to interlock with each other complet all as per manufactures instructioncomplete all as specified and asdirected by Engineer in Charge. |
| 67 | Supply an fix, PVC (SWR) pipes 110 mm bore singlesocketed in any length with rubber ring joints, laid in trenches complete all as specified and as directed. |
| 68 | Supply and fix in repairs PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 69 | Supply an fix, PVC (SWR) pipes 75 mm bore singlesocketed in any length with rubber ring joints, laid in trenches complete all as specified and as directed. |
| 70 | Supply & Fix PVC (SWR) pipes 75 mm dia. single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and as directed. |
| 71 | Supply and fix in repairs PVC (SWR) junction single, (Single T) 110 mm bore equal or unequal complete all as specified and directed. |
| 72 | Supply and Fix PVC (SWR) gully trap 125/110mm,setting and jointing with solvent cementconcrete type B-1 1:2:4 complete all as specified and as directed. |
| 73 | Supply and fix in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and directed. |
| 74 | Supply and fix 75 mm PVC (SWR) bends of any radius complete all as specified and as directed. |
| 75 | Material and Labour for PCC 1:3:6, type C-2 as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 100mm bore pipe complete all as specified and as directed. |
| 76 | Material and labour forRCC M-30 design mix using 20 mm gradedstone aggregate as in slabs supported on wall, beams and columns, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 77 | Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed. |
| 78 | Material and labour for Plain cement concrete 1:2:4, type B1, using 20mmgraded stone aggregate as in coping, benching,haunching including necessary form work staight or curved and finishing the exposed surface even and smooth without using extra cement all as specified and as directed. |
| 79 | Supply and fix in repair PVC rain water pipes of 150mm dia vertically fixed to wall/cladding using MS clampscomplete all as specified and as directed.NOTE: MS clamps shall be measured and paid separately. |
| 80 | Supply and Fix PVC (SWR) bends any radius 150mm bore dia with access door complete all as specified and as directed. |
| 81 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soil complete all as specified and as directed. |
| 82 | Removing excavated soil to a distance not exc 50m and deposited where as directed at a level not exc 1.5 m above the starting point complete all as specified and as directed. |
| 83 | Material and labour for reinforced cement concrete design mix M-30 using 20 mm graded granite stone aggregate in foundaions including rafts, footings, foundaion beams, plinth beams, bases for columns etc, basement slabs, underreamed piles and mass concrete all as specified and as directed. Note : Reinforcement and form workshall be measured and paid separately. |
| 84 | Material and labour for RCC M-30 Design mix using 20mm graded stone aggregate as in retaining walls, basement walls and the like any thickness above top of footing including attached pilasters and buttresses complete all as specified and as directed.NOTE :- Reinforcement and formwork shall be measured and paid separately. |
| 85 | Material and labour for reinforced cement concrete design mix M-30 using 20 mm graded granite stone aggregate as in beams, cantilevers, lintel over 1.5M spanall as specified and as directed. |
| 86 | Materialand Labour for 50mm thick plain cement concrete 1:2:4 type B1 using 20mm graded granite stone aggrgate as floor and other similar type of work, and finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and as directed. |
| 87 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surfaces of concrete all as specified and as directed. |
| 88 | Use and waste for form work to faces of walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etccomplete all as specified and as directed. |
| 89 | Use and waste for form work to sides and soffits of beams, lintels etc,fair finished flat surfaces of concrete all as specified and as directed. |
| 90 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed. |
| 91 | Material and labour for Loose filling with broken stone aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, etc complete all as specified and as directed. |
| 92 | Supply and fix PVC (SWR) vent cowl 110mm complete all as specified and as directed. |
| 93 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillarsetc, complete all as specified. |
| 94 | Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 95 | Material and labour for Precast reinforced cement concrete 1:3:6 type C1 using 20mm graded stone aggregateas in cover slabs of man holes including necessary form work, placed in position, set in CM 1:4 complete all specified and as directed. |
| 96 | Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) onelight point controlled by one switch 5 Amps |
| 97 | (b ) onefan pointpoint controlled by one switch 5 Amps |
| 98 | (c ) one bell buzzer point controlled by one push button on Independent board |
| 99 | (d) One 3pin socket outlet 5 Ampson Independent board |
| 100 | (e ) One 3pin socket outlet 5 Ampsonsame board |
| 101 | All as per Item No. 96 above but with 4 sq mm PVC insulated copper conductor cable(FRLS) including 4 sq mmPVC copper conductor used as earth wirefor power point on independent board for One 3 pin socket outlet, 15 Amps. |
| 102 | Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed. |
| 103 | Supply and Fix Modular Switch 1 way, 16 Amps, 1 module complete all as specified and as directed. |
| 104 | Supply and fix Modular Bell push 5 Amps one way, 1 module complete all as specified and directed. |
| 105 | Supplyand fix Modular socket outlet, 6 Amps, 2 and 3 pin combined complete all as specified and directed. |
| 106 | Supply and Fix Modular Socket, 6/16 A- 6 pin combined 2 module complete all as specified and as directed. |
| 107 | Supply and fix Fan step regulator, 120 w, 2 module complete all as specified and as directed. |
| 108 | Supply and fixCeiling rose in poly carbonate 3 plates flush type 6 Amps, 230 volts AC complete all as specified and directed. |
| 109 | Supply and fix electric Bell multi music type 230 Volts, AC, with ISI mark complete all as specified and directed. |
| 110 | Earthing complete with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized earth lead wire 4.00 mm size by means of bolts, nuts, check nuts and washers of galvanized ironsteel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1(using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completionall as specified and as directed.Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 , RCC cover slab, GI funnel with 15 mm dia watering pipe, wire mesh, 40mm dia light grade GI protection pipe for earth lead etc., complete. |
| 111 | Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 8 way with 200 Amps rated copper bus bar double doorprotection, neutral bar,earth bar, single pole and neutral 240 volts, MCBs used as incommer flush to wall complete all as specified and as directed. |
| 112 | Supply and fix connecting and testing RCCB Double pole (RCCB DP-2M) 230 volts, 10 KA, 100 MA of capacity 40 Amps, complete all as specified and directed. |
| 113 | Supply and fix MCB single pole 240 volt C curve 10 KA,6 to 32 Amps capacity IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross scetional area completeincluding suitable sizecopper lugs complete all as specified and directed. |
| 114 | Material and labour Sub main wiring complete with 2 runs of 4 Sqmm single core PVC insulated unsheathed cable(FRLS) 1100 volts grade multi standard copper conductor drawn through and including PVC casing and caping includingall accessories fixed in walls/roof including one run of 4 sqmm earth continuity PVC insulated copperwire(FRLS) complete all as specified and as directed. Note : 3 runs of 4 Sqmm cable, one run of PVC casing and caping shall be measured as one length. |
| 115 | Supply and fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make: Havells /Philips/Bajaj. |
| 116 | Supply and fix LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells/ Philips/Bajaj. |
| 117 | Supply and fix LED luminaire 600 mm x 600 mm,40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.Make: Havells/ Philips/Bajaj. |
| 118 | Supply and fix LED luminaire 150 mm x150 mm, 9 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.Make: Havells/ Philips/Bajaj. |
| 119 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep min air delivery 210 CFM service value 6.00 BEE. Five Star rated with brushless direc current motor (BLDC) complete all as specified and as directed. |
| 120 | Supply and fix Exhaust Fan of size 300 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed. |
| 121 | Supply and installation of pump set monoblock type pump setelectrically driven 2 HP,and a speed of 2840 rpm,240 V, Single Phase and a power rating of 1.5 kW, Casing Material: Cast Iron, Motor Body Material: SS, Shaft Material: SS 410.The pump has a discharge range of 5.5-13 lps and head range of 6-13 m withsuction pipe with inlet/outlet of 80/80mm dia, with and including cast iron foot valve of suitable size and connection from starter to motor using suitable size copper cable all complete including necessary items all as specified and as directed. Make : Model No.KDS-214LP of Kirloskar or equivalent in Crompton Greaves/Havells/KSB. |
| 122 | Supplying and laying 50mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in trenches after taking out unserviceable pipe complete all as specified and directed. |
| 123 | Supplying and laying 40mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls or trenches, in floors etc. after taking out unserviceable pipe complete all as specified and directed. |
| 124 | Supplying and laying 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls or in floors etc. after taking out unserviceable pipe complete all as specified and directed. |
| 125 | Supply & Fixing Non Return butterfly Valve 50 mm dia with flanged ends cast iron body, brass spindle, hand wheel, ISI mark including necessary rubber gasket, nuts, bolts washer etc all as specified and directed. |
| 126 | Supply and fix in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25 mm bore complete all as specified and directed. |
| 127 | Supply and fix 2000 litres capacity tripple layer, rotational molded, polythene water storage tank with cover (Cylindrical vertical with closed top),colour white ,hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and as directed. |
| 128 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtrwide and not exceeding 1.5 meter in depth for taking out and laying UG cable and getting out, excavated earth, forming bottomsurfaces to required level complete all as specified and directed. |
| 129 | Removing excavated soil and depositing to the sides and returning filling in including spreading leveling watering and well ramming in layers n.exc 25cm thick in soft/loose soil after cable is laid complete all as specified. |
| 130 | Schedule of Credit (Minus) Rs.13750.00NOTE: Bidder shall insert credit amount of Rs. 13750.00 as ratein Green field under Col-13. |
