|
| 1 | PART-A (Bldg.) |
| 2 | 26.11 P & F 3 Speed rotary switch for Desert Cooler complete with testing etc as required. |
| 3 | 26.12P & Replacement of M.S. Shaft of fan motor for Desert Cooler/ exhaust fan. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 4 | 26.14P & F of stud with nuts and washer for Desert Cooler/ exhaust fan.All the scrap material should be retained by the contractor. |
| 5 | 26.15Servicing and overhauling of 20\" sweep desert cooler including oiling, greasing, painting of tank from inside with rubber paint after properly desmantling each assembly and refixing the same as required. |
| 6 | 26.16Paintingof desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required. |
| 7 | 26.17Replacement of cooler pads (heavy) setof3 no. of size 25\" x 27\" |
| 8 | 26.18P & F Brass float valve of weighing approx. 250 gm, 8\" long rod,PVC ball of 4\" dia. For desert coler as required. |
| 9 | 26.19P & F adjustable M.S.grill 20/22 gauge of size approx. 24\" x 26\"including painting etc. as required. |
| 10 | 26.20P & F aluminiun blade for 20\"\" desert cooler fanas required. |
| 11 | 26.21P & F outer/inner threaded PVC nipple 1/2\" dia and 2\" long |
| 12 | 26.22P & Replacement of pvc pipe of 1/2\" size for vertical pump of desert cooler as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 13 | 26.25P & replacement of 4 nos. supporting legs of 20\"\" fan motor with rubber pads of desert cooler as required.Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 14 | 26.26P & replacement of high quality pvc distribution \" T \"and 3 no. elbowfor cooler |
| 15 | 26.28.1Labour Chargesfor fixing of desert cooler in windows including handling of cooler upto desired location, making electrical/water connections, testing etc. as required.on groud floor |
| 16 | 26.30P & F of submerciblepump setsuitable for 18/24 \"Desert coolers. |
| 17 | 26.32.1P & Ffan motor suitable for 20\" desert coolerincluding making connection testing etc. as required.with copper winding Motor ISI Marked |
| 18 | 26.38Rewinding of motor of desert cooler fan with super enamelled copper wire, \"E \" class insulation material including removing,refixing,testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 19 | 4.1.8Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 forlower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5,in existingsurface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure \"A\" attached with this BSR 3 x 2.5 sq.mm |
| 20 | 7.14Providing & Fixing ofISI marked (IS:1293) 6 ampunbreakable 3 pin plug top having lamp indicator with CM/L no. printed and made out from industrial grade Polycarbonate or fire resistant ABS material, brass terminal including making connection testing etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . |
| 21 | 2.11.2P&F ball cock with rod & PVC ball complete brass wt. not less than400gm 20mm |
| 22 | 2.13.1P&F 15mm dia connection pipe of approved quality/make PVC pipe with C.P. brass nuts upto length 300mm. |
