Bids Are Invited For 9M119m0000050 Tray Component Should Confirm To The Technical Requirements As Per Drng 9M119m.00.00.050/Tray. If Alternate Process Is Adopted Process Details To Be Provided. Raw Material To Be Used Is En24 And Is In Vendor Scope And, Medak-Telangana

Bids Are Invited For 9M119m0000050 Tray Component should confirm to the technical requirements as per Drng 9M119M.00.00.050/Tray. If alternate process is adopted process details to be provided. Raw material to be used is EN24 and is in vendor scope and Cu-FRTP- 2 Cu tube (semi hard) IS:191 (part vii) 1980. BDL or its representatives reserves the right to inspect at any stage of manufacturing. Traceability of devices - To be maintained at all stages of manufacture, inspection and testing. All tests like hydraulic test / air tightness test/ as per the respective data sheets/drawings shall be in vendor scope. All jigs/fixtures/testing/inspection in vendor scope. All supplies are to be submitted to BDL with inspection reports consisting of a) Dimensional Inspection reports b) Heat treatment/EP certificates c) Material test certificates of raw materials procured and used by the vendor has to be submitted with every batch d) Hardness test results and mechanical properties test reports e) Hydraulic test and air tightness test reports and f) salt spray testing for painting. All heat treatment / annealing/stress relieving as applicable is in the vendor scope. All electro plating operation means Phosphating and painting including salt spray test is in vendor scope. Components shall be supplied in well protected packing to prevent from damages during transit and long storage.BDL will issue all painting ingredients as FIM required for painting operations on submission of 18 for a value of Rs. 22,61,002/ Collection of ingredients from BDL Bhanur stores in party scope. Procurement à usage of Zinc-Phosphate Grey Eроху Primer and Epoxy Thinner is in the Vendor scope. Consumption norms of ingredients required for coating operation of tray 9M119M.00.00.050 is as follows: S.NO. INGREDIENT MATL CODE CONSUMPTION/for 100 Nos 1) Glue Diluent D-4 for SA4 00140030000051 or 90072006090001 8.5 L 1) ADH Structural SA-4/BF-4 90140030000030 1.6 kg iii) Zinc-Phosphate Epoxy Grey Primer, in Vendor scope as it is COTS item (Commercial of the Shelf item) 51 iv) Black Nigrosin powder 90410813506543 or 90140590000001 28gm or 0.08 L v) Olive Green Paint/EP-140 Green with Hardener 90072008050008 or 900720081200025 L vi) Epoxy Thinner, in Vendor scope as it is COTS item (Commercial of the Shelf item). 6.61 CSK hole 7.0+0.2 should be ensured as per modified detail B to drg no.UFD61306-C. Delivery Period / Schedule: Supply 400 nos in every 2 months from the date of Issue of PO subject to issue of FIM (Paint ingredients). **Staggered deliveries are acceptable.fails to deliver the goods /service, within the stipulated delivery period, BDL reserves the right to recover from the supplier, LD and not by way of penalty an amount as detailed in terms and conditions. A sum of 0.5% of the price only of the stores which the supplier has failed to deliver as aforesaid for each week of delay or part thereof, subject to a maximum of 10%. EMS: As BDL is EMS 140001:2015 certified organization, It is requested you as partner of BDL to maintain EMS standards like proper scrap disposal, maintenance of pollution Control Board Norms and conservation of resources to protect environment. Option Clause: The Purchaser reserve the right to increase or decrease the quantity to be ordered up to 50 percent of bid quantity at the time of placement of contract. The purchaser also reserves the right to increase the order quantity by up to 50% of the contracted quantity during the currency of the contract at the contracted rates. Bidders are bound to accept the orders accordingly. TAX DETAILS: GST as applicable.BDL Reserves its right to release GST only after suppliers invoice/debt note is reflected in GSTR-28/2A within the specified time limit mentioned in GST law. Payment Terms: Payments shall be made within 30 days of issue of consignee receipt-cum-acceptance certificate (CRAC) and on-line submission of bills (This is in supersession of 10 days time as provided in clause 12 of GEM GTC) Dispatch: Free delivery at BDL Bhanur stores, Telangana. VALIDITY OF THE OFFER: The quoted prices will be valid for a period of 12 months from the date of submission of bid and prices are firm and not subject to alternation/ variation on any account.Purchase Preference clause: Provisions as per Make in Iain order 2017 will be applicable for the vendors/service providers. Manufacturing of Components: Should be as per the drawing provided by BOL. Finished Components: Should be delivered to BDL stores in proper packing condition (wrap in Oil Paper and pack in suitable container) to prevent from moisture, rusting, damage etc during transits and storage. All Packing boxes to be marked with Material Code, Drawing. No, Description. Type of Materials and Date of Manufacturing. Approved Sources are eligible to quote/participate against this enquiry remaining bids other than approval source will not be considered by TEC. It is mandatory to upload approved source certificate issued by BDL for this item, Remaining bids other than approved sources will be disqualified. BDL reserves the right to go for e-reverse auction process or may finalise the tender with out reverse auction if, required. Penalty Clause: The successful bidder will be debarred / blacklisted for the future tenders for a period as decided by BDL, if the hidder deviates from the agreed terms & conditions after the award of Purchase Order/ Work Order/Service Order apart from forfeiture of your EMD. Non-Disclosure of information given by BDL: Except with the written consent of the BDL, the seller shall not make use of any information supplied by the BDL for purpose of the seller. Any specifications or other details are for the purpose of manufacturing the articles and the Seller shall not use any such information to make any similar articles or part thereof for any other purpose.SPLIT ORDER RATIO: BDL reserves to split the order quantity to vendors with split ratio 60:40 as applicable. INTEGRITY PACT: It is required to enter into an integrity pact agreement; hence it is requested to sign on all the pages of integrity pact SELLER HAS TO PROVIDE DECLARATION STATING THAT THERE IS NO LEGAL CASE & FIRS PENDING AGAINST THE FIRM AND CONCERNED. AS9100D STANDARD TERMS: 1. The supplier shall not supply the non-confirming product against specification. 2. Supplier has to inform BDL in case of change in manufacturing process or input material or manufacturing facility. 3. Unless otherwise specified, supplier cannot outsource the items (order). 4. Supplier shall maintain the BDL product & production records up to 3 years 5. In case of non-conformity product, party has to inform BDL for further disposition action (i.e., re-work, rejections etc.) 6. Where ever applicable drawing issue no. Should be considered which is under column Dt. No 7. Right of access by the organisation, their customer and regulatory authorities to the applicable areas of all facilities, at any level of the supply chain, involved in the order and to all applicable records Total Quantity : 5290

Refer document

Refer document

Refer document