Tender For Completion Of Incomplete Work For Provn Of Pre Engineered Building With Bathroom And Allied Infra And Provn Of Bathroom And Tiling At Dawar Under Ge 874 Ews.; 1 Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft /loose soil complete all as specified and as directed. 2 M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 as in wall/septic tank/soakage well all as specified and directed. 3 M&L Rendering 15mm thick on fair faces of brick work, stone masonry or concrete surface, in cement mortar 1:4 finishedthe surface even and smooth without using extra cement , complete all as specified. 4 M&L for two coat of cement base paint over a coat of Alkali resistant primer to newly plastered surfaces of wall including preparation of surface complete. 5 M&L Moorum/red bajri filling in floors or pavings, laid in layers n.exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. 6 M&L Hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n.exc. 15cm thick, watered and rammed to a true surface of broken stone or boulders. 7 M&L 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in surfaces finished even and fair, complete all as specified and as directed. 8 M&L 40 mm thick Plain cement concrete 1:2:4 Type B1 (20mm graded aggregate) as in flooring finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed. 9 M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc. 0.18 sqm but n.exc 0.38 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement mortar 1:4 over 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone aggregate) complete all as specified and directed. 10 M&L 50mm thick wall panel made of 0.5mm thick hot dipped galvanised steel sheet on both side with 50mm thick layer of grid cfc free closed cell polyurethane foam with tongue and groove joint including cam lock system for interlocking fixed on base panel 30x65x1.25mm thick density of foam shall be 40 kg/cum (+/- 2 kg/cum) the panel shall be precoated coated as approved by GE complete all as specified and directed. 11 M&L 40 mm (for ceiling) puff insulated panel made of 0.50mm thick hot dipped galvanised sheet on both side with 40mm thick ridge polyurethane foam provided with tongue and groove joint for interlocking, to be fixed with inverted CRCA tee section 50x50x5mm thick and L section of 50x50x5mm thick fixed to roof trusses complete all as specified and directed. 12 M&L sliding type three track aluminium window of size 1.5m x 1.2m each provided with top and side member 92x31.7x1.5mm thick (1.06 kg/RM minium weight) bottom three track rail shall be 90x31.75x1.5mm (1.248 kg/RM) shutter shall of size 40x18x1.55 mm section (0.547 kg/Rm weight) shutter shall be provided with handle and self-locking arrangement. Interlocking style shall of 40x18x1.45mm (0.607 kg/Rm ) panel shall be of 6mm thick clear grade 6/2 Rs 1.3mm polycarbonate sheet. The window shall be fixed to wall panel as standard practice two shutter shall glazed and one shutter shall be ss wire gauged complete all as specified and directed. 13 M&L Aluminium puff insulated door shall be both solid as well as fly proof main door shall be 50mm thick including all fittings such as hinges, tower bolt, sliding bolt, handles, door closer etc complete all as specified and directed. 14 M&L 25 mm dia mild steel powder colour coated fancy type curtain rod with fixing arrangement and brackets for window and door the length shall be 450mm longer than opening size complete all as specified and directed. 15 M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and complete all as specified and directed. 16 M&L 50 mm thick plain cement concrete 1: 3: 6 type C-1 (using 20 mm graded crushed stone aggregate) laid in alternate bays (not exc 2 sqm each) as in plinth protection,finished the surfaces even and fair, including making joints 10mm wide and 30mm deep at spacing not more than 2.5m and at corners and as mandatory and filled with 1 part of bitumen mixed with 3 parts of sand along with wall and in between bayscomplete, complete all as specified and directed. 17 S&F GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. 18 S&F GI tube 20 mm dia, medium grade galvanised with all fittings laid in floors /wall etc. complete all as specified and as directed. 19 S&F Stop valves cast copper alloy, fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed. 20 S&F Bib taps cast copper alloy, chromium plated, fancy type, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed. 21 S&F Vitreous China Wash down water closetpan (Pedestal pattern), white including plastic water closetseat and cover closed pattern with flat bottom and mild steel chromium plated or aluminised hingingdevice & including P or S trap and connection totrap andto theflushing system anti syphonage pipe etc(excluding flushing cistern and flush pipe) complete all as specified and as directed. 22 S&F PVC valveless, syphonic action type, low level PVC flushing cistren 10 ltr capacity white with flush pipe & all fitting complete all as specified and directed. 23 S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top ) and fixed in position all as specified in SSR Part -I complete all as specified and directed. 24 S&F ball valves, high pressure, with polythene float and flynut, 20mm bore complete all as specified and directed. 25 S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed. 26 S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. 27 S&F 110mm dia PVC (SWR) pipes single socketed, in any length, laid in trenches or in floors/fixed to walls complete all as specified and directed. 28 S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and directed. 29 S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door complete all as specified and directed. 30 S&F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed. 31 S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed. 32 S&F PVC (SWR) reducers any radius 110mm bore complete all as specified and directed. 33 S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed. 34 S&F 110mm bore PVC (SWR) junction, single (single Y) equal or unequal with door access complete all as specified and directed. 35 PVC (SWR) vent cowl 75mm dia complete all as specified and directed. 36 M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed. 37 M&L for Preparation of newly un treated surfaces and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specified and directed. 38 S&F Stop valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore pipe complete all as specified and directed. 39 S&F Bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferruleof 15mm bore complete all as specified and directed. 40 S&F 500 Ltr capacity PVC water storage tank (cylindrical vertical with closed top) and fixed in position all as specified in SSR Part -I. 41 M&L 150mm dia SGSW pipe laid in trenches and jointed complete all as specified and directed. 42 M&L for concrete bed to drain pipe including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded aggregate) for 150mm bore pipe complete all as specified and directed. 43 Point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded flexible cable (green colour) as earth lead in and including cable 1100 volts grade including casing and capping (ISI marked) for one light/ fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified. 44 All as per item No 43 above but wiring with 1.5 sqmm copper wire (FRLS) and 1.5 sqmm earth wire for switch socket combination 3 pin 5 amps on independent board. 45 All as per item No 43 above but wiring with 2.5 sqmm copper wire (FRLS) and 1.5 sqmm earth wire for switch socket combination 6 pin 15 amps on independent board. 46 S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed. 47 S & F switch socket combination 5 pin 16A, flush type complete all as specified and directed. 48 S & F switch socket combination 3 pin 5A, flush type complete all as specified and directed. 49 S&F sheet metal enclosure for DBs (Single door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. 50 S&F sheet metal enclosure for DBs (Single door type) when MCBs to be used single pole and neutral 2 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed. 51 S&F MCBs single pole 240 volts 6 to 32Amps 10 KA C series, complete all as specified and directed. 52 S&F RCBO, single pole and neutral (SPN) 30mA, 240V, 32 Amp complete all as specified and directed. 53 S&F LED, 20 Watts, 4 ft light fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. 54 Supply and fix ceiling rose with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and directed. 55 M&L house service bracket (hook type) complete with 3 mtr long GI pipe 40 mm dia medium grade two Nos of 90 degree bend, MS hook and guy of stay including dismantling of old unserviceable house service bracket complete all as specified and directed. 56 Supply and Fixing 1100 Volts grade heavy duty cable PVC insulated multistranded aluminium conductor served with PVC tape and overall PVC sheathed in services connections suspended by insulating hanger not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat or circular of size10 Sqmm 2 core complete all as specified and directed. 57 Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below ground level)with top edge lead of the plate not less than 1.5 mtr below normal ground level, connected galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. 58 S&F 09W/10W Bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 59 S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230 V, 50HZ, RPM 1200, Copper winding of sweep 300mm, with 2 years warranty complete all as specified and directed. 60 S&F Single phase Voltage protection relay of trip setting 85 to 500 V AC complete with connecting testing and commissioning complete all as specified and directed.
