Tender for renovation work of zone 3 ward 26 civil lines myohol ward office, 1 Dismantling C.C/Brick/Granolithic floors work including stacking of 1 dismantled materials with in 60m distance as directed by Engineer Incharge. (S.I. No. 697) 2 Dismantling door or window including Chaukhat with fasts and including stacking of material with in a distance of 60m. (S.I. No.- 703) 3 Dismantling existing plaster including disposal of refuse within a distance of 60m. (S.I. No-706) 4 Dismantling lime or cement mortar brick work including stacking of dismantled materials with in 60m distance as directed by Engineer Incharge. (S.I. No. 692) 5 Dismantling of old Interlocking... etc compete work stacking of material up to distance of 60m. 6 M-150 Brick work in 1:4 (one cement & four fine sand) of F.M. 1.25 morter in foundation and plinth including supply of all materials, labour & tools & plants etc, required for proper completion of the work. Excluding GST (S.1. No. (305A+310)-5400+304 7 P/A 12mm thick plaster 1:4 cement fine sand mortar including labour, materials, T&P ... ete complete (S.I. No. 5970) 8 P/A 12mm thick plaster 1:4 cement fine sand mortar including labour, materials, T&P....etc complete (S.I. No. 597C+587) 9 Cement concrete with 20 mm gauge approved stone ballast, course sand and cement in proportion of 4:2:1 including supply of all materials, labour, tools & plants etc, required for proper completion of the work. Excluding GST (S.I. No. 279A) 10 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 11 Wall painting (one coat) with plastic Emulsion paint of approved brand & manufacture on decorative wall surface to give an even shade including thoroughly brushing, clean all dirt, grease, loose pieces and prepared smooth. S.I No. (15.15+15.16) New Item. 12 M.S. Iron work as frame work such as Door & Window... etc complete work. (S.I. No. 503A) 13 Providing and laying vitrified floor tiles in Size of Tile 600x600 mm sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of 13 approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. DSR 11.41.2 14 Providing wood work framed & fixed including simple moulding straight works as in window door. S.L. No. 403 15 Renewing panes of glass in door, window & ventilators or fixing in the new work with 4 mm thick glass panes fixed with brads & putty including supply of all materials, labour, T&P etc. required for proper completion of the work. S.I. No. 806(18.03 New Item) 16 Providing & laying 40mm thick ferro cement concrete treatment with 1:1.5:3 cement course sand stone grit water proofing compund with wiremess(Murga Jali) 17 S & F fully panelled commercial 32mm thick plywood ISI mark S & F fully panelled commercial 32mm thick plywood ISI mark. S & F fully panelled commercial 32mm thick plywood ISI mark complete work 18 Oxidized iron fittings with door & windows... etc complete work 19 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge. 20 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistem, including flush pipe, with manually controlled device (handle lever), conforming to IS 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required DSR 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid 21 Providing and fixing wash basin with C.1. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of each fittings and brackets, cutting and making good the walls wherever require:DSR 17.7.3 White Vitreous China Wash basin size 550 400 mm with a pair of 15 mm C.P. brass pillar taps 22 Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. DSR 18.48A 23 Painting or vanishing new work in small areas or new wood work with one coat (upto one sq. mt) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the 1.S.1. No. 103-1950 but one more coat (S.I. No-64+642) 24 Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding 1/2 meter (20) in depth and earth work in embankment to be in 20cm (8) layers, including rumming and dressing the surface to required levels and slopes and also including 1.5m (5) lift and 30m (100) lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m (100) distance as directed by the E/L. Excluding Cost of Royalty. (S.I. No. 253) 25 Supply & laying of Granular sub base (G.S.B.) by providing closed graded materila mising by mix 1 place method including water and compacting with vibratory rollers as per MORT & H specification 401 26 Supply of approved manufactures and fixing of 80mm thick rubber moulded interloking paver block of minumum compressive threnght kg. Per sq.m respectively made of concrete mixture 1:11/2:3 of approved make shape in all of compleat work at per direction of LR.C. in all of the work labours and materials T.N.P etc required for proper completion of the work at site. SI No 1504 27 Cartage/disposal of malwa upto 5km distance from site complete work. 28 Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano typeswitches & ceiling rose / anglebatten holder on 3 mm thick phenolic paminated backelite sheet ete complete in all respects 29 Wiring point for fan with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor 5.000 No 671.000 3355.000 cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, piano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 30 Wiring point for plug with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed 31 Supply and fixing of Gamp to 32 amp SP MCB... etc complete work. 32 Supply and fixing of Ceiling Fans with fan motor of AC permanent insulation cpacitator rating confirming BEE 5 Star rating and IS: 374/79 and Also comply with IS:1709/1984 with latest amendment.The rated voltage 220/240 volts, 50 Hz, 1-PH AC the fan assembled should consist of down rod blades, shakel canopies etc. and with double wall bearing system BEE 5 star rated - 1200 mm sweep SI No. 1501 i 33 Supply and fixing of tubelights including all fittings etc complete 34 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. DSR 14.81 35 Supply & fixing of exhaust fan... etc complete work. 36 Providing and fixing C.P. brass long body bib cock of approved 36 quality conforming to IS standards and weighing not less than 690 gms. 15mm Bore 37 Provision for Miscellaneous work... etc complete work. 38 S/l of full size with 5 shelves almirah.... etc complete work. 39 S/l of center table size 4 x 2.... etc complete work. 40 S/I of visitors chair M-208. etc complete work. 41 Provision for glowing sinage board etc complete work
