}

Tender For 13. Work Of Chakar Tiles And Installing National Flag On 30 Mtr. Pole Inside Gandhi Park At Gandhigram Maharajpur Kanpur Nagar., 1 Supply & Fixing Of 30 Mts. High Mast Pole Of Approved Make With Rising System, Hot Dip Galvanized Inside & Outs, kanpur-Uttar Pradesh

Government Departments has published Tender For 13. Work Of Chakar Tiles And Installing National Flag On 30 Mtr. Pole Inside Gandhi Park At Gandhigram Maharajpur Kanpur Nagar., 1 Supply & Fixing Of 30 Mts. High Mast Pole Of Approved Make With Rising System, Hot Dip Galvanized Inside & Outs. Submission Date for this Tender is 28-09-2024. Uniform Tenders in kanpur Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

45359023
Tender For 13. Work Of Chakar Tiles And Installing National Flag On 30 Mtr. Pole Inside Gandhi Park At Gandhigram Maharajpur Kanpur Nagar., 1 Supply & Fixing Of 30 Mts. High Mast Pole Of Approved Make With Rising System, Hot Dip Galvanized Inside & Outs
Open Tender
Indian
Uttar Pradesh
Kanpur
28-09-2024

Tender Documents

Tender Details

Tender For 13. Work Of Chakar Tiles And Installing National Flag On 30 Mtr. Pole Inside Gandhi Park At Gandhigram Maharajpur Kanpur Nagar., 1 Supply & Fixing of 30 mts. High mast pole of approved make with rising system, hot dip galvanized inside & outside, having pole sheet thickness 4mm, top dia minimum 150mm, bottom dia minimum 500mm, base plate 32mm thick, suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 8-12 luminares & its control gear boxes, 1.5 HP power tool motor, 3 point suspension system with steel wire rope 8mm dia, double drum winch. Including making suitable foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers, anchor plates etc complete in all respect as per direction and satisfaction of Engineer in charge. Electrical schedule sr.no.655 (2018) 2 Supply and fixing of 40 A TPNcapacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. SCh no 807 F 3 Supply and laying of aluminium conductor PVC insulated 16 Sqmm 4 core armoured served sheathed cables 1100 Volts gradeat a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.Sch no 501-i 4 S/W of submain with two nos. of 2.5 sqmm FRPVC insulated 1100 grade single core. Complete in all respected Sch no 1307 C 5 SF of plain pipe type copper tin plated cable leads . Lnsulated with tape and makingh connection etc . Complete in all respect (sch no 504 -e) 6 Supply and Fixing of flag (size : 20X10) (Non Schedule item) 7 Supply and burying of 600mm x 600mm x 6mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG GI wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing (This will apply for earthing of poles also). 8 SF single unit led avitation obstruction light complete with transformer and led spiral etc complete in all respect cat -AAAsch.no 409 ) 9 S/F OF factory wired integral Led flood light luminaires with die cast aluminum housingh buit with drver set suitabl for 170 -200 watt confireming to ip 66 protion complete in all respect Sch no 1455 cat AAA make of bajaj/ havell/surya only compleated in all Respect. 10 S/F of 4 X 2.5 black stone with lettering of signboard fixing on 1800mmx1400mmx200mm bricks wall eith joimting & Plastering 1:4 cement sand …………. Completed (Market rate) 11 e/w in surface excavation not exceding 1.5 m in depth but exceding 1.5 m width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m as directed by the engineer-in-charge 2.1.1 all kind of soil.ref. to DSR 2.80 12 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size DSR 4.1.8 13 Brick work common brunt clay (non modular) bricks of class-150 in foundation and plinth in : Cement mortar 1:6 (1 cement: 6 coursesand )Ref to DSR 6.1.1 14 GranularSub-Basewith Graded Material(Table:-400-1) Construction of granular sub-base by providing close graded material mixing in a mechanical mix plant at OMC,Spreading in uniform layers with motor grader on prepared dsurface and compacting with vibratory power rollerto achieve the desired density, complete as per clause 401.Grarding -I 15 Supply and fixing of chequerred precast cement concrete tiles 22 mm thick in footpath & courtyardjoinnted with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) Light shade pigment using white cement. DSR/PWD 11.20.1 16 1:2:4 (1 cement :2 coarse sand : 4 graded Stone aggregate 20 mm nominal size DSR 4.1.3 17 Steel reianforcement for r.c.c work including straightering,cutting bending placing in position and binding all complete upto plinth level.PWD/DSR5.22 18 Providing and fixing 18 mm thick granite( gang saw cut) miror polished premoulded and prepolished machine cut of kitchen platform vanity counters window sills facias and similar locations of required aize approved shade colour and texture laid over 20 mm thick base cementmortar 1:4 ( 1 cement:4 coarse sand) joints treated with white cement mixed with matching pigment epoxy touch ups including rubbing curing moulding and polishing to edges to give high gloss finish etc. complete at all levels.(slab area upto 0.50 sq.M) DSR/PWD 11.23

Key Value

Document Fees
INR 1180 /-
EMD
INR 10800.0 /-
Tender Value
INR 10.77 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Notice 0 KB
Click here to download tender document Tender Document 0 KB
Click here to download tender document Tender Document 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail