Tender For Misc Repair And Day To Day Maintenance Of Bsnl Buildings In Bathinda Oa Under Patiala; 1 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 3 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources ) 4 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : 5 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources ) 6 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 7 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources ) 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth andabove plinth level. 9 Thermo-Mechanically Treated bars of grade Fe-500D or more. 10 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 11 Cement mortar 1:6 (1 cement : 6 coarse sand) 12 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : 13 Cement mortar 1:6 (1 cement : 6 coarse sand) 14 Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 15 20 mm dia (heavy type) 16 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. 17 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 18 250x16 mm 19 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : 20 150x10 mm 21 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete. 22 Twin rubber stopper 23 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 24 In gratings, frames, guard bar, ladder, railings, brackets, gates,grill and similar works. 25 Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc. complete. 26 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i)Single socketed pipes. 27 110 mm diameter 28 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. 29 Single tee with door 30 110x110x110 mm 31 Single tee without door 32 110x110x110 mm 33 Bend 87.5° 34 110 mm bend 35 12 mm cement plaster of mix : 36 1:4 (1 cement: 4 fine sand) 37 15 mm cement plaster on the rough side of single or half brick wall of mix : 38 1:4 (1 cement: 4 fine sand) 39 White washing with lime to give an even shade : 40 Old work (one or more coats) . 41 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 42 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 43 One or more coats on old work. 44 Distempering with 1st quality acrylic washable distemper (ready made) having VOC content less than 50 gm per ltr. of approved brand and manufacturer including addidional coats whereever required to achieve even shade and colour. 45 Old work ( One or more coats ). 46 Finishing walls with water proofing cement paint of required shade : 47 Old work (one or more coats @ 2.20 kg/10 sqm) complete. 48 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. 49 With cement mortar 1:4 (1 cement : 4 fine sand). 50 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: 51 Float glass panes of thickness 4 mm. 52 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) 53 Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. 54 (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. 55 Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. 56 Cleaning and de-silting of gully trap chamber/ floor trap , including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 57 Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial de-silting of manholes and de-chocking of sewer lines. De-chocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm dia for all depth. 58 Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 59 Orissa pattern W.C Pan of size 580x440 mm 60 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 61 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 62 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 63 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. 64 In cement mortar 65 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 66 Of area 3 sq. metres and below 67 Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 68 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 69 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 70 Flexible pipe 71 32 mm dia 72 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 73 10 litre capacity - White 74 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : 75 White solid plastic seat with lid 76 Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : 77 Flat back wash basin of size 550x400 mm. 78 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 79 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 80 20 mm nominal outer dia. Pipes. 81 25 mm nominal outer dia .Pipes. 82 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 83 20 mm nominal outer dia. Pipes. 84 25 mm nominal outer dia. Pipes. 85 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 86 20 mm nominal bore 87 25 mm nominal bore 88 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: 89 15 mm nominal bore. 90 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 91 15mm nominal bore 92 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 93 15 mm nominal bore with 45 cm length. 94 Providing and fixing PTMT bib cock of approved quality and colour. 95 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. 96 Providing and fixing PTMT stop cock of approved quality and colour. 97 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. 98 Providing and fixing PTMT pillar cock of approved quality and colour . 99 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. 100 Providing and fixing PTMT grating of approved quality and colour. 101 Circular type. 102 100 mm nominal dia. 103 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 104 15 mm nominal bore, 105 mm long. Weighing not less than 138 gms. 105 20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 106 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 107 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 108 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. 109 With stainless steel cover plate minimum 1.25 mm thickness. 110 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 111 15mm nominal bore 112 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete. 113 Repairs to existing wooden doors/windows/cupboard shutters by chiseling,cutting etc. wherever required without dismantling all complete as per the directions of Engineer-in-Charge. 114 Providing the Carpenterservicesfor attending any type complaints of carpentary like repair of doors,windows, cupboard shutters ,chowkhats, minow repair of furnitureincl. setting of all type of fittingsin the BSNL Compounds within Bathinda OA etc. all complete as per the direction of E-I-C.The agency shall provide all necessary tools and plants,ladder and scaffolding wherever required including Mobile Phone and instructions to the worker for attending the complaints.(Nothing extra shall be paid on this account. The services for payment are for one Day ie Per Job Per Day.(Note: The material required for Job will be paid separaetly, if required) 115 Repairs to existing steel doors/windows/cupboard shutters wherever required without dismantling and without welding all complete as per the directions of Engineer-in-Charge. 116 Repairs to existing steel doors/windows/cupboard shutters wherever required with welding and with or without dismantling all complete as per the directions of Engineer-in-Charge.Cost includes the transportation of electric/gas welding plant to site. 117 Removal of Plants like Pipal Plant etc. from the roofs,shafts and from other parts of the Building at all heights and removing its roots,And pouring solution of Chlorpyriphos E.C 20% in the root of plants and making good the same complete as per direction of Engineer-in-Charge. 118 Uprooting of plant using scaffolding etc complete at all heights 119 Uprooting of plant without using scaffolding 120 Terrace/floor cleaning including removal of rank vegetations,grass etc. and its disposal outside the compound to a municipal dump all complete as per direction of Engineer-in-Charge. 121 Grouting of terracing covered with tile bricks of clause designation 125 with cement mortar 1:3 (1 Cement : 3 Fine Sand) mixed with 2% of integral water profing compound by weight of cement and finished neat complete as per direction of E-in-Charge 122 Repairing of defective PVC flushing cistern by replacing PVC fittings inside the cistern including providing the required handle etc of approved quality as perthe directions of Engineer-in-Charge. 123 Repairingto defective high level C.I /low level PVC/chinaware flushing cistern from over flowing and set it right in working order by replacing washer etc. complete as per the directions of Engineer-in-Charge. 124 Re-setting of white viterous wash basin/sink of any size or PVC cistern of 10 litres capacity wherever required all complete as per direction of Engineer-in-Charge. 125 Sealing the floor traps/P-traps etc. after cleaning the traps removing all rubbish from the trap, sealing of concrete at joints with polymer and mortar mixed with High Bond-40-and thick coat of High Bond-40 mixed with polymer and cement i/c dismantling and refixing of floor trap grating all complete as per direction of Engineer-in-Charge. 126 Dismantling & refixing the existing G.I. pipe and refixing the same i/c new fittings wherever reqd. as per direction of E-in-C. 127 Dia 15mm to 25mm 128 Providing and fixing PVC pipe 100mm dia of approved make at all height i/c necessary scaffolding ( if rquired) with necessary solvent etc. all complete as per direction of E-in-Charge 129 Providing and fixing gate valve with lever handle of approved quality: 130 15 mm nominal bore 131 Providing and fixing CP brass pillar Cock of approved brand i/c dismantling the existing pillar cock all complete as per direction of Engineer-In-Charge 132 Repairs to over head water storage PVC tanks placedat all floor levels byusing M-seal/PVC welding or other sealing compound on all the joints/cracks to stop the leakage etc. all complete as per direction of Engineer-in-Charge. 133 Providing and fixing G.I fittings in existing GI water supply line to stop the leakage etc. all complete as per direction of Engineer-in-Charge. 134 G.I Nipples ( length up to 150 mm )/socket/elbow/reducer elbow/Tee 135 15mm dia to 25 mm dia 136 32mm to 40mm dia 137 P/F overheadPVCwater storage tank cover of required size & shape with all accessories, at all floor levels complete as per direction of E-I-C. 138 Repairs to SCI rain water/sanitary pipesi/c dismantling from its existing position and refixing the same at all floor levels,i/c necessary scaffoldingif required after making necessary repair by using M-seal or other sealing compound on all the leaked joints/cracks etc. all complete as per direction of Engineer-in-Charge. 139 Up to 100m dia 140 Providing and fixing PVCwastecoupling of approved brand upto 40mm dia to wash basin/urinal/kitchen sink etc. all complete as per directoin of E-in-Charge 141 Repairs to brass bib cock, stop cock,PVC connections ,shower rose , gate valve, ball cockby replacing washers or jumpers etc. all complete as per direction of Engineer-in-Charge. 142 Repairs to C P brass bib cock, pillar cock ,angle valveby replacing brass spindle etc. all complete as per direction of Engineer-in-Charge. 143 Repairing of Water Supply line to remove air from GI Pipe line to have free flow of water i/c dismantling and re-fixing existing G.I. Pipe i/s fittings wherever required as per direction of Engineer-In-Charge 144 15mm dia to 40mm dia 145 Repair/re-setting of existingaluminum door/window shutters , tightening of cleats etc. replacing of pivots or aluminium hinges or rubber gasket/floor spring/door fittingswherever required including steel screws etc. all complete 146 Dismantalling & Refixing existing Aluminium partition including panelling & doors with fittings & fixtures etc. all required for refixing complete as per direction of Engineer-in-Charge.(Note:-The Rate includes all Cleats & screws etc required for refixing the partition but new member/material if required shall be paidextra to the agency. 147 Repair to RCC members such as Column ,Beams, slabs and chajjas etc including cutting the damaged portion as per site conditions and restoring the exposed reinforcement in proper position and applying bonding agent of approved quality and manufacture. Then covering the damaged area with under coat of plaster of mix 1:1:2 ( 1 cement :1 coarse sand:2 gera aggregate)finished rough and top finishing coat of 6mm cement plaster 1:3 ( 1cement : 3 fine sand )complete as per direction of Engineer in charge.( Note :- The item include necessary centering shuttering and scaffolding upto 10m height all complete.) 148 Cleaning of chocked one manhole and adjoining chocked sewer line andfrom one manhole to another manholeincluding removal of blockage with rodding etc complete till free flow of sewer and disposl of rubbish to the approved dumping ground complete as per direction of Engineer - in -charge.( Note :- No.of sewer manholes counted for payment) 149 Cleaning of all office tables, chairs racks,almirahs,doors,windows,dusting of files,switching of lights,fans,locking and unlocking of office,carring office files from one section to another section, from one office to other offices,making arrangement to deliver thr office letters in the post office for registered post/ordinary post,pouring of water in desert coolers in all sections on working days as and when desired by the Engineer -in -charge complete in all respects.(Note:- The services for payment are for one Day ie Per Job Per Day) 150 Credit for old dismantled/unserviceable material received from dismantling: - 151 Old M.S section/old scrap/M.S rolling shutter/M.Stubes/MSbaretc. 152 CI or SCI Pipes 75 to 100mm dia 153 Unserviceable wooden door/window shutter with or without chowkhats fittings 154 G.I. pipes 155 15mm to 20mm nominal bore 156 25mm to 40 mm nominal bore 157 Brass bib cock/stop cock/ball valves/CP bibcock/CP stop cock,C.P angle cock,CP pillar cock,CP shower rose,brassgate valves, CP ring,CP brass towel rail etc. of all dia 158 PVC Bib cock,stop cock,ball cock/WC seat cover, internalfitting of low level PVC cistern etc. 159 PVC water storage tank
