Tender for boundary wall elevation and necessary repair work of Zone 2 Ward Office No. 6 Rasulpur (Tulsipur), 1 Dismantling existing plaster including disposal of refuse with in a distance of 60m 2 Dismantling of CC on floor sor sr 17.07 item no 697 3 Dismantling existing damaged RCC slab with all complete work 4 Dismantling of existing damaged brick wall with cement mortar etc all complete work 5 1st class brick work in 1:4 cement mortar with all complete work 6 R.CC work (1:1.5:3) with cement course sand &20mm the stone grit including all complete work (S.I.No.279B) 7 M.S iron work including cutting bending and praper laying all complete work 8 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours andshades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete 9 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by. Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete, DSR 8.31 10 12mm thick plaster cement mortar consisting of 1 part cement and 4 parts of fine sand of 1.25 finerness modulus 11 20mm thick rough cast exterior cement plaster and boundry wall 12 Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 13 Wall painting (two coats) with plastic emulsion paint of first quality approved brand manufacture on undecorated wall surface to give an even shade i/c thoroughly brushing the surface free from mortar droppings and other foreign matter and sand prepared smooth as 14 Fixing of Mild steel or iron work in Angle iron Door window frame including cutting 14 welding & wastage including supply of all material etc required for proper completion of work. 15 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3.15 mm thick M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of read lead paint on all sides and digonal bracing etc complete.As Per- DSR Code 10.5.2Using flats 30x6mm for diagonal braces and central cross plece. D.S.R. 16 2 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturers specifications, This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. DSR 11.4 17 Providing and fixing ISI marked flush door shutters conforming to IS2202 (Part 1) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters DSR 18 9.21.1.135 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 18 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:. DSR 10.30.1 19 S/F of 24 guage Aluminum sheet on toilet 19 door shutters bottom including fixing with aluminum greeves 20 Wiring point for light with 1.5 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable earth continuity wire, piano type switches & ceiling rose/angle/batten holder on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 21 Wiring point for fan with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor 5.000 No 671.000 3355.000cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting.complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire, plano type switch & ceiling rose on 3 mm thick phenolic paminated backelite sheet etc complete in all respects 22 Wiring point for plug with 1.0 sq.mm FRLSH PVC insulated multistrand single core Copper Conductor cable in PVC conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting,complete with 1.5 sq.mm. FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit continuity wire and piano type switches & socket etc., complete in all respects as directed 23 Supply and fixing of 6amp to 32 amp SP MC 24 Supply and fixing of Ceiling Fans with fan motor of AC permanent insulation cpacitator rating confirming BEE 5 Star rating and IS: 374/79 and Also comply with IS 1709/1984 with latest amendment. The rated voltage 220/240 volts, 50 Hz, 1-PH AC the fan assembled should consist of down rod blades, shakel canopies etc. and with double wall bearing system BEE 5 star rated-1200 mm sweep Sl No. 1501 i 25 Supply and fixing of tubelights including all fittings etc complete 26 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete DSR 11.27 27 Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound onforming to 15. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement: 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to 15 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabsAfter two days of proper curing applying asecond coat of cement slurry using 2.75 kg/sqm of cement admised with water proofingcompound conforming to IS: 2645 andapproved by Engineerin-charge.Finishing the surface with 20 mm thickjointless cement mortar of mix 1:4 (1cement:4 coarse sand) admixed with waterproofing compound conforming to IS: 2645and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster, and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge:With average thickness of 120 mm and minimum thickness at khurra as 65 mm. 28 Providing and placing on polythiene Water Supply and Sanitation work Providing and placing on terrace polythlene water storage tank IS: 12701 marked with cover and suitable locking aggangement and making necessary holes for inlet, outlet and overflow pipes but out fitting and baser support tank etc. all complete. 29 P/F EUROPEAN TYPE WC with seat and 10 lit flushing cistern & CP flush bend with fittings & C.I brackets 40mm flush bend etc complete all fittings, as per required 30 P/F INDIAN TYPE WC with seat and 10 lit flushing cistern & CP flush bend with fittings & C.I brackets 40mm flush bend etc complete all fittings, as per required 31 p/F white viterous china wash basin with CI/MS brackests 15 mm CP brass waste of standard pattern 550*400mm with 15 mm cp brass pillar tap. 32 p/F flexible PVC waste pipe for wash basin including waste fittings 32 mm dia 33 Providing & fixing soil, waste and vent pipes.a) 100mm dia centrifugally cast iron S & S pipe. 34 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.15 mm nominal outer dia Pipes 35 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.20 mm nominal outer dia Pipes 36 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.25 mm nominal outer dia Pipes 37 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931a) 15mm nominal bore 38 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931a) 15mm nominal bore
