Tender For Construction Of Toilet At Ward No 2, Government Boys Higher Secondary School In Thathiengarpet Town Panchayat; 1 Earth work excavation in all classes of soils such as hard stiff clay, stiff black cotton, hard red earth, shales, murram, ordinary earth, earth mix with 50% fair sized boulders etc., with initial lead and lifts including laying, spreading, leveling, sectioning breaking clods etc., includingall incidental charges etc., complete as per standard specification . for FoundationsSS 20B 2 Supply delivery and filling ofStone Dustin layer of not more than 15 cm thick including watering with all layers and consolidation complying with standard specification including cost and conveyence of M Sand to Site and all labour charges and all other incidential charges etc,. complete as per Standard Specification 3 Cement concrete of mix 1:4:8 (One cement four M Sand Eight aggregates) using 40mm gauge hard broken including cost conveyance of all materials to site including labour charges, transporting and placing in position including shoring, strutting forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification. 4 Supplying & Erecting centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ). 5 Without Struttings 6 Column 7 With Struttings 8 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -Footing, Plinth beam, Tie beam/Lintel, Ground Floor Roof beam, salbs, Sloped roof beam and slabs 9 SupplyingandFabrication of Steel and placing in position MS / Ribbed tor steel Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.- 10 Brick work in Cement Mortar in 1:5 ( One cement and Five M Sand ) using best quality of Country bricks of size 8¾x 4 ¼ x 2 ¾ including all cost of materials and labour charges includingCuring charges etc., complete as per Standard Specificationand as directed by department officials. 11 Upto Basement 12 Above Basement 13 Plastering walls with cement mortar 1:5 (One cement five M Sand) 12mm thick in all floors and all exposed surfaces including cost and conveyance of materials to site and all labour charges,Curing etc complete as per standard specification. 14 Special Plasteringwith cement mortar 1:3(One cement three M Sand) 10mm thickincluding cost and conveyance of materials to site and including all labour charges etc complete and as directed by department officiers etc complete as per standard specification. 15 Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no M Sand to be added) over roof slab,the proportion of brick jelly to lime being 32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum 16 Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three M Sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 17 Dadooing sides of walls with Glazed design tiles of size 200 x 200 x 6 mm set in Cement mortar 1:3 _ 20 mm thick and pointed with the same colour cement including cost and conveyence of all materials , labour charges etc complete as per standard specification. 18 Supplying and fixing in position Cement basedhydrualically pressed Anti-Skid tiles (pattern design) 20 mmthick in cement mortar 1:3 - 20mm thick & pointedwith same colour of cement etc., complete as per standard specification 19 Supplying and fixing MS grill windows and ventilators etc. using 20mm x 6mm as directed by the departmental officers inclusive of cost of MS grill and labour charges including one coat of red oxide and fixing in position etc. complete (as per schedule of rates) as per standard specification. 20 Supplying and fixing M.Sdoors, Using MS angles, 20mmx6mm flat, as directed by the departmental officers inclusive of cost of MS grill including one of red oxide and fixing in position etc. complete 21 Supplying fabricating and fixing in position of Alumi,Anodised natural colour matt finished LOUVERED VENTILATOR fixed window with three panels using 62*38*2mm@1.17kg/m and the louvers with moving arrangement will be made with Aluminium channel of size 60*30*4 mm @ 1.27kg/m with necessary glass panes for louvers 4mm thick Aluminium clips , including all materials,labour,power consumption charges required for fabrication if necessary chipping dismantling making necessary holes in RCC coloumns, Beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as drected by the departmental officers The Aluminium surfaces should be anodised with matt finish under electrically conditionin accordance withISspecification 1868/1962 of Anodic thickness of not less than 15 microns (fifteen) complete.All the materials should be got approved by the Engineer incharge before fixing as directed . 22 Supplying and fixing RCC Pre cast slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications., 23 Geophysical Investigation Charges 24 Drilling of 150mm dia Borewell in Hard rock area including 180mm dia pilot bore and labour charges for insertaion of casing pipe in the drilled hole etc., 25 Supply of 150mm OD PVC Casing Pipe including transportaion charges etc., 26 Supply and Delivery of Single Phase Pumpset with motor as per isi 20lpm x 150 m head 27 Conrol Panel Board Consist offollowingvoltmeter &ammeter suitable for above pumpset 28 32 mmUPVC ColumePipe 29 2.5 sq.mm Sub Flat Cable 30 Supply and fixing ofPVC pipe and specials complete complying with standard specifications and as directed by the departmentalofficersetc complete as per standard specification. 31 For 110 mm dia pipe 32 For 110 mm dia PVC Door Elbow 33 For 110 mm dia PVC Tee 34 For32 mm dia pipe 35 For32 mm dia PVC Elbow 36 For 32 mm dia PVC Tee 37 ForCP Towel Rod 38 ForCP Soap Trey 39 For Tap 40 Supplying and fixing in position best Bevelled Edge MIRROR of 6mm thick of size 50cm x 40cm fibre glass shelf type with necessary plywood backing and rubber button, chromium plated screws, teakwood plugs, etc., complete complying with standard specification and as directed by the departmental officers. 41 Supplying and fixing in position of Indian make White glazed earthen ware Flat Back Urinal of approved quality including dismantling masonry if necessary and redoing the same to original condition etc., complete as directed by the departmental officers. 42 Supplying and fixing in position white glazed Indian water closet of size 580 X 440mm of Orissa type of approved quality with P or S trap with M Sand cushion and forming flooring alround the closet using 40mm broken brick jellylime concrete 1:2:5 ; 100mm thick and finishing the top torequired slope and including giving necessary connection to cast iron soil pipes by dismandling masonry / RCC works and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmentalofficersetc complete as per standard specification. 43 Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm dia brass chromium plated piller tap, 32 mm dia C.P. waste coupling, 32 mm dia P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications (the wash hand basin and specials should be got approved by the Executive Engineer before use on works) 44 Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification. 45 Painting new iron works with two coats of approved quality and color of synthetic enamel paint over the existing red oxide primer in all floor etc., complete as per standard specification. 46 Wiring with 2 x 2.5 sq.mm PVC unsheathed Sc.alu. cable of 650V grade in suitable TW Fillets on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour light point and Fan point.SD 16 47 Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for incandescent lamp with 60 W bulb, wire and making good of the concealed portion with suitable colour SD 83 48 Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour SD 42 49 Supply and fixing of 32 Amps DP Switch of 500 V with metal clad with fuse and neutral (Side Handle) on suitable TW Board , with earth connection onlySD 144 50 Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class B GI pipe of dia not less than 32mm complete with necessary masonry work SD 234 51 Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1 x 1/8 Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1 thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD127 52 Supply and delivery and fixing of HDPE tank 1000 litres capacity as per IS 12701/ 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges as directed by departmetal officers.
