S.R. To K.T.W. Asardho Tq. Dharur Dist.Beed - Item No.1. Dismantling the stone Masonary in cement mortar including stacking the material with all lifts etc.Complete. 2 Item No 2 .Excavation in Hard Rock of all toughness by breaker iincluding boulders up to 0.60 m diameter (0.113 cum)minimizing damage to side4 slopes of excavation and placing the excavatedrock neatly in approved ump area including cost of all materials , machinery, labour , leveling bed etc.Completewith Lead 15 m and all lifts as directed.. 3 Item No.3 :- Providing and Fixing in position TMB FE500 barreinforcement of Various diameters for RCC pille caps, footings foundations, slabs, beam , coloumns, canopies, staircase, newels, chajjas, lintels, pardis, copings fins, arches, etc.as per detailed drawing and shedules, includingcutting , bending, hooking the bars , bindings with wires or tack welding and supporting as required complete as directed... 4 Item No. 4 :- Providing and fixing in position M.S. SILL BEAM ISWB 150 x 100 mm size as per detailed design & drawing including one coat of anticorrosive paint with two coats of oil paint etc.Complete all leads and lifts as per specification. 5 Item No. 5. :- Providing and fixing in position M.S.CHANNEL of size 150mm X 100mm , fabricated from8 mm plate including fabrication with 12 mm dia, hooks of 50 cm in length including one coat of anticorrosive paint with two coats of oil paint etc.Complete all leads and lifts as per drawings. 6 ItemNo.6 :- Providing & laying in situ Cement concrete of grade M-15 of trap / granite / quartzite/ gradedmetal for PCC with or without surface reinforcemnet / RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice spilway crest, spilway downstream face, energy dissipating ,structures, intake structures, training walls, picers, abutments etc. with concrete mixer with shuttering and scaffolding, placing compacting, curingwith an initial lead of 1 km & all lift etc Complete as directed.. 7 Item No. 7. Back filling up to ground level behind the structure etc complete with suitable material of approved quality in layers not exceeding 20 cm without disturbing the structure etc. complete as directed. 8 Item No.8. Excavation of Nalla Regardation and deepening in all types of Strata etc. 9 Item No. 9:- Providing and constructing 230 mm thick dry rubble stone pitchingusing stones and stone chips from approved source including cost of all material, labour, hand packing / wedging stone chips, finishing etc complete with lead up to 50 m and all lifts as directed. 10 Item No. 10 :- Manufacturing with QAP & fabrication of KT weir needle gates - staight type size 2.12 X 0.50 M - 98 kg weight as per relevant Indian standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinary charges, 1 km lead charges of Gate parts at site, Inspection & Quality control charges, Sand blasting, Painting with one coat of zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and two coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150 +/- 5 microns per coats as per IS 14177. 11 Item No. 11. :- Providing & Fixing Information Board of 1.2 x 0.75 m prepared on 16 guage M.S. sheet with angle iron frame of size 35 x 35 x 3 mm with cross bracing of size 25 x 25 x 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white background and back side grey store enameled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non peal able crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 x 60 x 75 cm as directed by Engineer - in - charge
