Supply Of Materials Formgnregs Work, Kozhikode-Kerala

Supply of Materials forMGNREGS work-vitrified floor tile 60*60 cm 2 Coarse sand (zone III) 3 Ceramic glazed tile 1 st quality minimum thickness 5mm in all colours shades and design except burgundy , bottle green black 4 Fine sand (zone IV) 5 Vitreous china orisa type w.c pan size 580mm 6 Portland Cement 7 Flushing cistern P.V.C 10 lts capacity (low level )( white)(with fittings,accessories and flush pipe) 8 100 mm S.C.I trap with vent heel 9 P.V.C pipe 20 mm outer dia 12kgf/cm2 10 Quarry Waste 11 Vitreous china flat back wash basin 550*400 12 Polyethylene water storage tank with cover and suitable locking arragement 13 Royalty for good earth 14 15 mm C.P brass tap 15 Stone Aggregate(single size): 10 mm nominal size 16 Stone Aggregate(single size): 40 mm nominal size 17 Stone Aggregate(single size):20 mm nominal size 18 Stone for masonry work 19 hire charges of concrete mixer 0.25 to 0.40 cum with hopper 20 Twisted steel/deformed bars 21 vibrator (needle type 40mm) 22 sundries 23 wall form panel 1250*500mm 24 Corner angle 45*45*5mm 1.50m long 25 100mm channel shoulder 2.5m long 26 double clip (bridge clip) 27 single clip 28 M S tube 40mm dia 29 wall form panel 1250*450mm 30 Corner angle 45*45*5mm 2.5 m long 31 column clap 450*1070 mm 32 prop 2m (2-3.5m) 33 Structural steel such as tees,angles,channels,and RS joist 34 Red oxide zinc chromate primer 35 Adjustable telescopic prop 3m ( 2.02-3.75m) 36 Beam clamp 300-380 mm (450-1070 mm) 37 Adjustable span EOS+SI(2.35-3.40) 38 Laterate stone of size 40*20*15 cm 39 Laterate stone of size 35*20*20cm 40 Factory made door frame size 50*47 mm with all thickness 5mm made of single piece extruded profile 41 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (mat finished) 42 Powder coated M.S butt hinges 100mm*58mm*1.9mm 43 Bright finished or black enameled mild steel screws 40mm 44 Bright finished or black enameled mild steel screws 20mm 45 Mild steel sheet for tanks 46 Iron pintel including welded pin 47 mild steel sheet with bolts and nuts tomrest on pintels 48 Mild steel hooks 49 mild steel round bar above 12mm dia 50 Flats up to 10mm thickness 51 C.P brass waste 32mm 52 C.I bracketfor wash basin and sinks 53 Semi rigid PVC waste pipe for sink an basin 32mm diawith length not less than 700 mm i/c PVC waste fittings 54 PVC pipe 15 mm outer dia 12kgf/cm2 55 PVC bend 63 mm dia 56 PVC socket/coupling 63 mm dia 57 PVC door elbow 110 mm dia 58 PVC bend 110mm dia 59 PVC pipe 63 mm outer dia 4kg/cm2 60 PVC Elbow 63 mm dia 61 PVC Tee 63*63*63mm dia 62 Boulder 50 mm to 200mm dia 63 Gravel 1.5mm to 2 mm 64 Mild steel tubes hot finished welded type 65 White vitreous china 10 Lit (full flush)capacity controlled low level flushing cistern with all fitings 66 Welding by electrict plant 67 Galvanised steel J or L hooks 8mm dia 68 Bitumen washer 69 G.I plain washer thick 70 Precoated Aluminium Trafford sheet 0.450 mm 71 PVC pipe 50 mmouter dia 10 kgf/cm2 72 Solid block of size 40*20*20 cm 73 Hollow block of size 40*20*15 cm

INR 9010 /-

Refer document

INR 50.90 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB