Tender For Machinery Job Work Under Juridication Phed, sikar-Rajasthan

Tender For Machinery Job Work Under Juridication Phed. - Turning of various sizes of CID Joints Class- 10/ 15 Complete set (Labour Charges), The Joints will be supplied by the Junior Engineer concern of Department and carting to workshop and after turning of these joints, firm is liable to transport upto Junior Engineer concerns store own his cost. 2 80mm dia 3 100 mm 4 125mm dia 5 150mm dia 6 200mm dia 7 250mm 8 300mm 9 350mm 10 400mm 11 Threading on GI Pipes different diameter as below (Rate Per Mouth Threading). The Pipes will be supplied by the Department and carting to workshop and after threading of these pipes, firm is liable to transport upto Junior Engineer concerns store own his cost. 12 32mm 13 50mm 14 65mm 15 80mm dia 16 100mm dia 17 125mm dia 18 150mm dia 19 Cutting of GI/MS/CI Pipes of any class as below (Rate per Mouth- One cutting only making two pieces). The Pipes will be supplied by the Department. 20 32mm 21 40mm 22 50mm 23 65mm 24 80mm dia 25 100mm dia 26 125mm dia 27 150mm dia 28 200mm dia 29 250mm 30 Welding on M.S. / G.I./CI Pipes and other material by Electric Welding, this includes all the material like welding rods/ equipment like welding machine/ generater, if required for job. 31 At work shop 32 On site 33 Providing, Fabrication of Mild SteelPlane Ended/ Flanged Specials like Tees, Bends, Reducers, Enlargers, Plugs, Tail Pieces and Blank Flange made from MS pipes, MS sheet strip and MS Sheet of required sizes by welding, cutting and treading as per site conditions and as directed by the Engineer- In- Charge complete in all respect. 34 Making Hole (only labour charges) by drill machine in MS/ CI/ DI Pipes and Specials. per hole rate 35 Upto 12mm dia Hole 36 Above 12mm dia Hole 37 Making of GI Assembly pipe for various sizes including threading, tightening, welding of flange and welding with MS Patti, holes and cable grove making as per required length of 3.00 M/ 6.00 M (Pipse and flangse shall be providedand carting these to workshop by the the department). Length of MS strip will be 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flange. Holes in the flanged will be standard size and above 12 mm dia. in size. After tightening the pipe and flanged, welding will be done at junction of flange and pipe complete in all respect. After preparing of Assembly Pipes, the firm is liable to transport these toconcerns divisional store own his cost. 38 50mm 39 65mm 40 80mm dia 41 100mm dia 42 Supplying of MS Rods for different sizes of sluice valveand should be supplied as according to size of old rods including material and finishing for the following sizes. 43 Sluice Valve Size 80mm 44 Sluice Valve Size 100mm 45 Sluice Valve Size 125mm 46 Sluice Valve Size 150mm 47 Sluice Valve Size 200mm 48 Sluice Valve Size 250mm 49 Sluice Valve Size 300mm 50 Sluice Valve Size 350mm 51 Sluice Valve Size 400mm 52 Supplying of Chuck Nut for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 53 Sluice Valve Size 80mm 54 Sluice Valve Size 100mm 55 Sluice Valve Size 125mm 56 Sluice Valve Size 150mm 57 Sluice Valve Size 200mm 58 Sluice Valve Size250 mm 59 Sluice Valve Size300 mm 60 Sluice Valve Size350 mm 61 Sluice Valve Size400 mm 62 Providing of U Plate (U Stand) for different sizes of sluice valve and should be supplied as according to size of old U Plate including material for the following sizes. 63 Sluice Valve Size 80mm 64 Sluice Valve Size 100mm 65 Sluice Valve Size 125mm 66 Sluice Valve Size 150mm 67 Sluice Valve Size 200mm 68 Sluice Valve Size 250mm 69 Sluice Valve Size 300mm 70 Supplying ofMS Rods and Chuck Nut (Complete Set) for different sizes of sluice valveand should be supplied as according to size of Check Nut including material for the following sizes. 71 Sluice Valve Size 80mm 72 Sluice Valve Size 100mm 73 Sluice Valve Size125 mm 74 Sluice Valve Size 150mm 75 Sluice Valve Size 200mm 76 Sluice Valve Size 250mm 77 Sluice Valve Size 300mm 78 Sluice Valve Size 350mm 79 Sluice Valve Size 400mm 80 Making Direct Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flanged will be standard size and above 15 mm in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material. The Length of Direct Pump Piece will be 30 cm (300 mm). 81 2 dia. Size (50 mm) 82 2 ½ size (65 mm) 83 3 dia size (80 mm) 84 4 dia size (100 mm) 85 Making Reducer Pump Piece with heavy duty pipes (Class- B) and flange (as per table- D)including cutting of pipe, threading welding and MS strip for length - 100 mm, Width- 20 mm and thickness- 6 mm and to be welded around the strip with pipe and flanged. Hole in the flange will be standard size and above 15 mm dia. in size. After tightening the pipe and flanged, welding will be done at junctin of flange and pipe complete in all respect including cost of material (Both the larger and smaller pipe will have equal length making reducer). The Total Length of Reducer Pump Piece will be 30 cm (300 mm). 86 2x2 ½ “ dia size (50 x 65 mm) 87 2 ½ “x 3” dia size (65 x 80 mm) 88 2”x 3” dia size (50 x 80 mm) 89 3”x 4” dia size (80 x 100 mm)

INR 500 /-

INR 10000.0 /-

INR 5 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB