tender for Providing Of Electrical Items In Sanitary Section At Site-B Of Svpnpa, Hyderabad.-1 1.10 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 1.1 1.10.3 Group C 2 1.17 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2.1 1.17.3 3 x 1.5 sq. mm 2.2 1.17.21 3 x 4 sq. mm 3 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 3.1 1.21.1 20mm 3.2 1.21.2 25mm 4 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 4.1 1.24.1 5/6 amps switch 4.2 1.24.4 15/16 amp switch 4.3 1.24.3 3 pin 5/6 amp socket outlet 4.4 1.24.5 6 pin 15/16 amp socket outlet 5 1.27 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 5.1 1.27.4 6 Module (200mmX75mm) 6 Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in surface etc as required. 6.1 MR 6 Module (200mmX75mm) AE(E)(P) / EE(E)-Hyd-I 7 19.1 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise-75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 8 MR Supply Installation Testing and Commissioning of surface mounted LED batten fitting with CRCA / extrude aluminium body having system output not less than 2000 Lumens and wattage not more than 22W and having inbuilt surge protection not less than 2 KV latest LED technology of consistent light output, stable color performance and colour temperature not less than 5700K and energy saving, suitable for use on 230V, 50Hz, A.C supply including making connections with 1.5sq.mm. FRLS PVC insulated copper conductor single core cable as required. 9 MR Supply Installation Testing and Commissioning of SURFACE mounted LED batten fitting having system output not less than 4000 Lumens and wattage not more than 40W having inbuilt surge protection not less than 2 KV latest LED technology of consistent light output, stable color performance and colour temperature not less than 5700K and energy saving, suitable for use on 230V, 50Hz, A.C supply including making connections with 1.5sq.mm. FRLS PVC insulated copper conductor single core cable and etc., complete as required. 10 MR Supply, installation, testing and commissioning of recessed mounted 600mm x 600mm size high efficiency performance decorative LED luminiaries made of CRCA powder coated body with high transmittance diffuser with system lumen not less than 3600 lumens and wattage not more than 36Watts colour temperature not less than 5700K, complete with LED modules, driver unit, built in 2KV surge protector duly wired, duly suspended from the ceiling with Anchor/ Dash fastneres and chain link arrangement, including connections with 1.5 Sq.mm FRLS PVC insulated copper conductor single core cable in flexible metal conduit and earthing etc, as required.
