Tender For Spl Repair To Certain Bldgs And Minor Work At Naugam Under Ge 969 Ews.; 1 Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering, complete all as specified and as directed. 2 Dismantlingtimber scantling 40 sq cm and over in section in any position framed work, complete all as specified and as directed. 3 Dismantling boarding, any description, fixed in any position with nails, complete all as specified and as directed. 4 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets complete all as specified and directed. 5 M&L second class hard wood clean sawn as in scantling in framedwork, complete all as specified and as directed. 6 All as per above item No. 5 but except timber only 7 S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 8 S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. 9 S&F 2nd Class softwood weather boarding clean swan, plain 20mm thick or feather edges 15mm to 20 mm thick and fixed with 30mm over laps, complete all as specified and as directed. 10 S&F 2nd class soft wood 20 mm thick in faciaboarding fixed with nails in any situation planed one side with butt joints, complete all as specified and as directed. 11 S&F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 6 Sqcm and not exceeding 13 Sq. cm complete all as specified and directed. 12 S&F Second class soft wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cm complete all as specified and directed. 13 M&L for 4 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in partition, walls etc, complete all as specified and as directed. 14 M&L for 4 mm thick veneered decorative Ply wood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work inceiling etc, complete all as specified and as directed. 15 Preparation of old painted surface of wood and wood based surface any description not otherwise described over 10cm width or girthand applying two coat of synthetic enamel paint complete all as specified and as directed. 16 Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paintover a coat of Pink primer complete all as specified and as directed. 17 M&Lpreparing surfaces of wood and wood based materials,new or old of any description and girth, not otherwise described and treated with two coat of creosote, complete all as specified andas directed. 18 Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed. 19 All as per above item No. 18 but exceeding 1.50 sqmbut n. exc 4 Sqm each all as specified and directed. 20 S&F Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleatfor fixing etc.(minimum thickness of powder coating 50 micron) complete all as specified and directed. 21 S&F powder coated aluminium (minimum thickness of powder coating50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required(Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall besmooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel crews all complete as per architectural drawings and the directions ofEngineer-in-charge. 22 S&F 2nd class soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed. 23 S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and as directed. 24 S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed. 25 S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b) 26 S&F Door closer hydraulically regulated cost iron body designation No 1 universal type suitable for door shutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed. 27 S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed. 28 S&F Aluminium anodised, barrel tower bolts 150 mm of extruded section and fixed, complete all as specified and as directed. 29 S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. 30 S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed. 31 S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed. 32 S&F Aluminium handles 100 mm , cast type, anodisedcomplete all as specified and as directed. 33 S&F Aluminium handles 150 mm , cast type, anodised complete all as specified and as directed. 34 S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Complete all as specified and directed. 35 S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 36 S&F 5.5mm thick sheet glass, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane, complete all as specified and as directed. 37 M&L for hardcore of gauge not exceeding 63mm of broken stone, deposited, spread and levelled in layers not exceeding 15cm think, watered and rammed to a true surface complete all as specified. 38 Moorum/red bujri filling in floors or pavings laid in layers n. exc 15cm thick spread, levelled and rammed incl watering, complete all as specified and as directed. 39 M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded agrregate) as insub base of floors, finished even and fair over well/rammed/compacted earth complete all as specified and as directed. 40 M&L machine cut Kota stone slab flooring20-25mm thick over 20 mm thick cement screed base in CM 1:3 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclrubbing, and polshing, complete all as specified and as directed. 41 Demolition of brick work, PCC block masonary,stone masonaryor boulder masonary built in cement mortar, complete all as specified and as directed. 42 M & L Brickwork with sub class B (old size) bricks, straight or curved on plan exceeding 6 M mean radius built in CM (1:4) complete all as specified and as directed. 43 M&L brick work with sub class B bricks straight or curved on planto any radius in half brick thickwalls built inCM (1:4) complete all as specified and as directed. 44 M&L for rendering 10mm thick in cement and sand mortar (1:4) on fair faces of brick work or concrete surfacesincluding finishing the surface even and smooth with using extra cement,complete all as specified and directed. 45 M&L for rendering 15 mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing finished even and smooth with using extra cement in cement mortar1:4using Water Proofing Coumpoud @ 3% by weight of cementcomplete all as specified and directed. Note : WPC shall be measured and paid separately. 46 Preparation of newly plastered surfaces of walls and applying two coats of cement base paintcomplete all as specified and as directed. 47 M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar (1:4)complete all as specified and as directed. 48 M&L for glazed ceramic tiles in vertical surface 450x300x10 mm thick colour and design (as approved) in vertical surfaceand jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over and including 15 mm thick cement plaster using CM (1:4), complete all as specified andas directed. 49 S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedfancy type, chromium plated complete all as specified and as directed. 50 S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed. 51 S&F in repairs for 15 mmbore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule, complete all as specified and as directed. 52 S&F in repair stop valves fancy type chromium plated screwed down high pressure , with crutch or butterfly handle, screwed both ends for iron pipe or for unions 15 mm bore,complete all as specified and as directed. 53 S&F vitreous china squatting pan Orrisa patternsize 630x450 mm white with integral foot rests (excluding flushing cistern) incl flush pipe 60cm long, complete all as specified and as directed. 54 S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed. 55 S&F in repairs PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed, complete all as specified and as directed. 56 S&F PVC connection pipe 15 mm size with PTMT nuts of length 600 mmfixed to GI tubbing, complete all as specified and as directed. 57 S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 cm long between flagescomplete all as specified and as directed. 58 S&Fin repairs curtain rod, mild steel, chromium platedfixing with stainless steelbrackets and funnels stops, rollers etc, complete all as specified and as directed. 59 M&L Brickwork with sub class B (old size) bricks, straight or curved on plan exceeding 6 M mean radius built in CM (1:6) complete all as specified and as directed. 60 M&L Pre-cast cement concrete block masonry Type C1, 1:3 :6 ( using 20 mm graded crushed stone aggregate) with solid blocksexc 10cm in width and setting in CM1:6 complete all as specified and as directed. 61 M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n. exc 0.16 Sqm in floors etcset and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar (1:6) and dismantling old floor hearth or wall tile, complete all as specified and as directed. 62 Dismantling structural steel as in gate door but excluding framed work complete all as specified and as directed. 63 S&F steel work in tubular trusses as in gate post including special shaped washer etc complete using ERW or induction butt welded tubes as in post confirming to Fe-410 W (Gde-E-250) quality-A complete all as specified. 64 S&F in repair Wooden wall panelling with tongued & grooved joint laminated over high quality DHF,8 mm to 10 mm thick fixed to timber frame work,complete all as specified. 65 S&F in repairs 2nd class soft wood (kail) prelaminated wooden flooring as in boarding in floors incl 5mm thick foam, 15mm thick, planed one side and edges tongued and grooved or rebeated as in flooring fixed with nails in floor,Complete all as specified and as directed..Note: Colour and shade of tiles shall be approved by GE and contractor shall not have any claim whatsoever on this account. 66 S&F PVC grating doom 100mm dia with waste hole of PTMT (Min wt 25 gms). 67 S&F fibre reinforced PVC connecting pipe 60cm long with brass check nuts and washer both side. 68 Supply only integral water proofing compound,complete all as specified and as directed. 69 S&F 2nd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together withpinned at joints, complete all as specified and as directed. 70 S&F32mm thick factory madeflush shutter,solid core construction with block board core and plywood face panels,commercial type on both sides, complete all as specified and as directed. 71 M&L 1mm thick Mica for fixing on door with for adhesive (Fevicol) etc all as specified and as directed. 72 M&L 2mm thick door skin, for fixing on door with for adhesive (Fevicol) etc all as specified and as directed. 73 S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (Make Sandhu ISI marked or its equivalent approved make)(g) Making good of wall surface to match with existing surface complete 74 S&F in repair designed looking 5mm thick mirror of selected quality glass, mounted on 6mm thick PVC sheet fixed to wall with wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed. 75 S&F in repairs for Vitreous China urinals, bowl type (back or coner wall type) full stall type, complete including providing and fixing plugs, bedding urinal against wall in CM (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, complete all as specified and as directed. 76 S&F in repair urinalwaste down pipe with all arrangement complete all as specified and as directed. 77 S&F waste coupling of PTMT half or full threaded, suitable for urinals, 32mm dia bore, min wt 45 gms 78 S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60 gms) complete all as specified. 79 M&L for 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. 80 S&F in repair vitreous China wash basin (CAT No CNS WHT 801 and CNS WHT 301, Make Jaguar or equivalent flat black size 650x400x200mmincludingfull pedestal, but including brackets and including cutting for and pinioning in ends of brackets, waste pipe, coupling, and pillar tap complete fittings, complete all as specified and as directed. 81 S&F in repair vitreous China wash down water closet pan (pedestal pattern), (CAT No VGS WHT 81751S and CAT No VGS WHT 81201, Make Jaguar or equivalent includingflushing cistern and flush pipe, including connection to drain or out going pipe and flush pipe with complete fittings, complete all as specified and as directed. 82 Corner sheet glass shelf assembly consisting of 5.5 mm thick sheet glasswith brass chromium plated bracket guard, complete all as specified and as directed. 83 S&F in repair CP health faucet hand held triggered nozzle and delivers a spray of water with 1mtr length of pipe, complete all as specified and as directed. 84 S&F in repair sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long complete all as specified and as directed. 85 S&F in repair CP soap tray fixed to walls with rubber plugs complete all as specified and directed. 86 S&F in repairs steel tubes medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors of 15mm bore, complete all as specified and as directed. 87 S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening complete as per manufacturers specifications and as directed by Engr-in-Charge. 88 S&F factory made solid PVC moulded door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channe having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side& as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cementsupplying and fixing in the frame at site as per specification & drawing including taking down chowkat n. exc 1.5 Sqm without taking off shutters from frame, complete all as specified and as directed 89 S&F Aluminium anodised 100mm long butt hinges with galvanised mild steel screws, complete all as specified and as directed. 90 S&F Aluminium anodisedhandles, cast type anodised 125mm long complete all as specified and as directed. 91 Demolition of cement concrete in ground floor and pavingsn. exc 15 cm thick below or above ground level complete all as specified and as directed. 92 M&L Sand filling under floors or in foundations, including watering and consolidation, complete all as specified and as directed. 93 M&L Machine pressed precast concrete interlocking paver blocks with grey cement and no pigmentin any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, complete all as specified and as directed. 94 M&L for providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stop, rounded or chamfered on edges, complete all as specified and as directed. 95 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc 96 M&L kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid including 15mm thick rendering in cement mortar (1:4)and jointed complete all as specified and directed. 97 S&F Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane 3mm thick Complete all as specified & directed. 98 S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm complete all as specified and directed. 99 Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc. 100 M & L For Rendering 15 mm thick plastering on brick work or concrete surface in CM (1:6) and rendering is to be finished even and smooth w/o using extra cement .complete all as specified and directed. 101 Preparation ofPreparing surfaces plastered New surfaces walls and applying two coat of OBD .complete all as specified and directed. 102 M&L for complete removal of existing treatment of surfaces and applying two coat of oil bound distempering with emulsion on wallsover a coat of Chalk whiting, on plastered surfaces, preparatory to distempering complete all as specified and directed. 103 M&L one coat of synthetic enamel paint including preparation of old steel Surfaces of any description, over 10 cm in width or girth,not otherwise described .complete all as specified and directed. 104 Removing of excavated/ demolished materialnot exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point all as directed by Engr-in-charge. 105 Preparation of New galvanised surfaces (on CGI/PGI roof sheet)of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint overpreparation and applying red oxicecomplete all as specified and as directed by Engr-in-charge. 106 S&F LED luminarie 70W Energy saving, environment friendly & robust Highbay/Mediumbay LED IP65 lumanarie with high efficacy complete all as specified and as directed. 107 S&F 2x1.5 Sqmm+ 1x 1.0 Sqmm earth wire cable Wiring for circuit/subman wiring alongwith earth wire and PVC conduit with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/recessed as require complete all as specified. 108 S&F in repairs MCB DB 4 way sheet metal enclosure SPN 240 Volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common netural link all enclosed in standard sheet flush mounting complete all as specified and as directed. 109 Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface 110 M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casingcaping with allaccessories such as bends, elbow, reducers , junction boxes /MS boxes 1.6 mm thick duly painted /PVC boxfactory made ractangular in shapeas requiredwith top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathedFRLS copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for light and fan point. 111 M&L One light/bell/Fan / 5Amp Same board point controlled by one switch 112 M&L One switch socket combination 5 Amps on independent board 113 All as per item No. 115herein before but with 2.5 Sqmm PVC insulated FRLS and unsheathed copper conductor for switch socket combination 3 pin 15 Amps on independent board with 1.5 Sqmm copper conductor cable as earth lead connected to common earth and dolly. 114 S & FSwitch piano flush type 5 amps single pole one way , complete all asspecified and as directed. 115 S&FSwitch socket combination box type multipurpose 2/3 pin suitable for 5 Amp plug top controlled by one switch complete all asspecified and as directed. 116 S & F switch socket outlettwo in 1 3 Pin, 5 Amp, 230 Volts, complete all asspecified and as directed. 117 S & F Switch socket combination multipurpose 5 pin/15 Amps box type complete all asspecified and as directed. 118 S & F in repair Ceiling rose surface bakelite surface 65x50 mm 3 terminals fixed on wall/ceiling and including PVC block, complete all asspecified and as directed. 119 S&F LED luminarie Basic all purpose surface all mounted LED batten with polycarbonate housing and integrated electronic driver of 1x20W, complete all asspecified and as directed. 120 S&F Air Circulator fans 230 volts single phase oscillating 400mm sweep suitable for wall mounting, complete all asspecified and as directed. 121 S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, Copper winding of sweep 300m, complete all asspecified and as directed. 122 M&L Sub main wiring with two run single core 4 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm diaPVC conduit medium gradeISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed.Note: Two runs of 4 sqmm and one run of 4 sqmm cable and one run of PVC conduitshall be measured as one RM 123 S & Fin repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all asspecified and as directed. 124 S&F in repairs amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of single pole 6 to 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all asspecified and as directed. 125 S&F in repairs amp rating 240V, 10KA C curveminiature circuit breaker (MCB) of SPN 32 Amp and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all asspecified and as directed. 126 M&L for Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspen ded by insulating hangers not more than 1 metre apart including 4mm suspension wire, with two single core cablesflat or circular16 sq. mm 2 core, complete all asspecified and as directed. 127 M&L in repairs for Earthing complete with galvanizedsteel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is ilnclusive of necessary earth work, RFR and removal etc 128 Note:- Schedule of credit Rs 1,07,740.00will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.
