tender for Civil Work Of Establishment Of Oxygen Storage Tank (Lmo) At Autonomous State Medical College, Auraiya Civil Work Of Establishment Of Oxygen Storage Tank Lmo At Autonomous State Medical College Auraiya, Civil work of installation of Oxygen Storage Tank(LMO) at Autonomous State Medical College, Auraiya.Sl. No. Item Description1 Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm en plani, Including dressing of sides and ramming of bottoms, lift upto 1,5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.2 Surface Dressing of ground including removing vegetation and ineqalities not exceeding 15cm deep and disposal of rubbish, lead up to 50m and lift up to 1.5m.3 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete4 Supplying and filling in plinth with sand under floors, Including watering, ramming, consolidating and dressing complete.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:4:8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40 mm nominal size 6 Providing and laying in position specified grade of reinforced cement concrete, excluding; the cost of centering, shuttering, finishing and reinforcement All works upto plinth level Foundation Columns Plinth Beam 7 Centering and shuttering tting, propping etc. for:Foundations, footings, bases of columns, etc. Centering and shuttering including strutting, etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts9 Brick Work with Common burnt Clay (Non Modular) Bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shape and sizes in cement mortar 1:4 (1 Cement : 4 Coarse sand )10 Steel Reinforcement for RCC work including straightning, Cutting, Bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo Mechanically Treated bras of grade Fe- 500D or More.Up to plinth level 11 Providing and fixing 1mm thick MS sheet door with frame of 40x40x6mm angle iron, 3mm MS gusset plates at the junction and corners, all neccessary fitting complete. including applying a priming coat of approved steel primer 10.5.1 In gratings, frame, guard bar,ladder, railings, brackets, gates and 12 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.13 Providing and fixing of angle iron frame of doors, Window and Ventilators of mild steel angle section of size 35X5X5mm or 35X5mm flat piece to the existing T iron frame or to the wall with dash fastener, including fixing of necessary butt hinge and screw and applying a priming coat of aooroved steel primer all complete as per the direction of Engineer in charge.14 15mm Cement plaster in single coat on plinth 1 Cement : 4 Course sand in plinth 15 Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. (16.78.2 With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 ) 16 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 meter lead as per direction of Engineer-in-Charge.17 Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, color and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all completed as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).
