Automatic Motor Circuit Analyzer Up To 6 Kv Along With Necessary Software For Testing & Analysis Of Data With Following Features 1.,,Testing & Measurement 1.1,,Winding Circuit Analysis A),,Inductance B),,Resistance C),,Impedance D),,Capacitance E),,Phase Angle F),,D/Q 1.2 Dc Test A),,Insulation Resistance B),,Dielectric Absorption C),,Polarization Index D),,Step Voltage E),,Hi-Pot Test 1.3 Surge Test Pulse-To-Pulse Error Area Ratio:(P-P Ear) Test Will Calculate The Area Under Waveform Curves For Each Successive Pulse As Voltage Is Increased To The Ieee-Recommended Levels, Then Compare Them To Each Other. If The Frequency Of The Waveforms Moves More Than The Allowable Tolerance, The Unit Shall Automatically Stops The Test. 2.,,Types Of Fault Detection A),,Turn-Turn Short B),,Phase-Phase Shorts C),,Coil- Coils Shorts D),,Open Coils E),,Reversed Coils F),,Unbalanced Phases G),,Dirty Winding H),,Moisture / Feeder Cables I),,Motor Lead Line Connection J),,Ground Wall Insulation Weak Insulation A),,Turn-Turn Short B),,Phase-Phase Short C),,Coil-Coil Testing Features: 1) L-L Ear Ratio,, 2) P-P Ear Ratio For Quickly And Accurately Display Weak Insulation 3) P-P Ear Graph For Automatically Indicate When Weak Insulation Occurs 4) Impedance And Unbalances 5) Phase Angle 6) Impedance D/Q,,,, 7) Frequency Response 8) Capacitance,, 9) Capacitance D/Q,, 10) Impulse Mode For Quickly Applying Voltage To Motor Under Test To Decrease Testing Time 11) Display Up To 200 Waveforms On The Screen 12) Display Coil # Tested On Screen 13) Ear Calculation:,,Method To Calculate The Differences Between The Coils For Accurate Assessment Of Condition 14) Set Ear Ratio Pass Fail Level 15) Ear Ratio Automatic Fail Indicator 16) Display Reference Wave Form 17) Ear Perato Chart Report Dc Motor Testing,, 1) Impulse Mode For Quickly Applying Voltage To Motor Under Test To Decrease Testing Time 2) Display Up To 200 Waveforms On The Screen:,, 3) Display Coil # Tested On Screen 4) Ear Calculation:,,Method To Calculate The Differences Between The Coils For Accurate Assessment Of Condition 5) Set Ear Ratio Pass Fail Level:,, 6) Ear Ratio Automatic Fail Indicator 7) Display Reference Wave Form,, 8) Ear Perato Chart Report,, 9) Compare All Interpole Surge Waveforms On One Screen,, 10) Compare All Field Coil Surge Waveforms On One Screen 3.,,Safety Protection & Indication A),,Safety Monitoring System For Grounding System B),,Internal Protection For Dx Unit & Pp Unit C),,Emergency Stop Button D),,Hv Lead Energies Indication E),,Start, Or Push To Test (Ptt) Button F),,Open Ground Indication G),,Automatic Grounding Test Voltage H),,Hv 3-Phase Lead Energies Indication I),,Ce Mark/Approval 4.,,Accessories A),,Power Supply Chord B),,Hv Test Leads C),,Lv Test Leads D),,Cable For Connecting E),,Earthing Lead F),,Portable Workstation With Standard Features Having Lpt & Com Port, Dvd R/W Drive Which Would Further Facilitate The Usage Of The Same Portable Workstation For Testing And Documentation. G),,Usb For Data Transfer 5.,,Manual In Three Sets In Hardcopy (English) And One Cd In Softcopy A),,Comprehensive Operating Manual For Fault Condition B),,Manual For Maintenance & Trouble Shooting C),,Manual For Software Usage & Operation 6.,,Carrying Case A),,Carrying Bag For Test Leads B),,Carrying Case Transit Cases For All Separate Units C),,High Density Plastic Mould Rugged Transport Cases 7.,,Storing /Analyzing /Reporting A),,Portable Unit For Field-Testing Of Generators, Motors, And Transformers Etc. B),,Automatic Test Report Generation Facility. C),,Waveform Comparison D),,Data Storage E),,High & Low Testing Voltage Capability In One Unit To Test The Motor Circuit And All The Insulation F),,Intuitive Graphical User Interface With Touch Screen. G),,Usb Printer Interface To Quickly Print Results H),,Impulse Mode Allows The Operator To Quickly Apply Voltage When Testing Coils And Dc Motors I),,Fully Test Dc Motors, Including Bar To Bar Armature. J),,Push To Test (Ptt) Lock To Hold Vo
