Tender For Supply Of Equipment/Material, Design, Erection, Testing And Commissioning Sop To Jica By Providing 11/0.4Kv, 63Kva Sub Station Twis Kharota A/W 11Kv Ht Line In Electrical Section Sdhatha Uesd Jawali. (Ts No.47/2024-25).-11 KV HT Line 2 11 kV AB Cable [Size: (3x70+95 mm²){additional 1% sagging & wastage) 3 Prov. Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) 4 Prov. Muffs with concerete filling 5 Prov. X-Arm: [Channel Iron (75x40x6 mm), Length : (2340 mm X 4 Nos] for supporting DO fuse unit & GO switch 6 Prov. GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm 7 Prov. Cross Arm: [Channel Iron (100x50x6 mm), Length: 1270 mm i/c tolerance of 100 mm either side) 8 Prov. Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x 8 structures 9 Prov. Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] 10 Prov. & fabrication of Belt Set - MS Angle Iron: 50x50x6, Length :1800 mm & X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm forDoub. Pole Str. i/c clamp (2 No. per set) 11 Prov. X-Arm (Horizontal) - MS Channel Iron: 100X50x6, Length: 2340 mm x 2 No.] Δ Formation 12 Prov. Pin Insulator with GI Pin 13 Prov. Disc Insulator Set cleave & Tounge halicaly formed fitting 14 Prov. GO AB Switch Unit (11kV, 400A,)O/D type 15 Prov. D.O Fuse Unit 16 Prov.Stay set complete HT i/c Egg 17 Prov. Stay Wire (7/3.15 mm) (7.0 kg Per Stay Set) (Prov. By HPSEBL) 18 Prov. HT Earthing set complete 19 Prov. GI Wire 8 SWG. (Prov. By HPSEBL) 20 Prov. Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro structure: 2 No ] 21 Prov. Full clamps: [On Double Pole Dead End structure: 4 No, Single Pole Run Thro structure: 2 No] 22 Prov. Danger Plate (250X200X1.6 mm) 23 Prov. Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more(with flat and spring washers)] 24 Prov. Barbed Wire 25 Prov. Aluminium Paint 26 MS Angle Iron: 50x50x6, Length : 2800 mm for Road crossing 27 Erection of 9 Mtr. ST pole Single structure i.e. digging of pit, fixing of insulator, x-arms,K.B. set, Top clamp, barbed wire, danger plate, drilling of holes and filling of pit + rammingcomplete in all respect. 28 Erection of 9 Mtr. ST pole double structure i.e. digging of pit, fixing of insulator, x-arms,K.B. set, Top clamp, barbed wire, danger plate, drilling of holes and filling of pit + rammingcomplete in all respect. 29 Erection of Stay set HT i.e. digging of pit, fixing of stay road, filling of pit, nozzeling & tightning. 30 Erection of HT Earthing set complete 31 Erection of G.O. switch 400 Amp. Comp. 32 Fixing of jumper 33 Sagging of AB Cable3 x 70+95 mm²i.e. laying, stringing and sagging & binding with insulator (Single wire per KM). 34 Sagging of GI Wire i.e. laying, stringing and sagging & binding(Single wire per KM). 35 Mannual carriage of material 1 KM HT line considering average distance from road to site of work (0.100 Km) 36 63 KVA Trsanformer 37 Prov. Distribution Transformer (Ordinary), 11/0.4 kV,63 KVA 38 Prov. Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) 39 Prov. Muffs with concerete filling 40 Prov. X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incomer line 41 Prov. MS Angle Iron (50X50x6 mm), Length: (2800 mm) x1 Nos for LAs 42 Prov. X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch 43 Prov. Transformer Bed, Belting & Knee Bracing 44 Prov. X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed 45 Prov. X-Arm [Channel Iron (100x50x6 mm), Length : (460mm) x 2 Nos for supporting Main Channel of Transformer] 46 Prov. MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos 47 Prov. MS Angle Iron (35X35x5 mm), Length : (460 ) x 2 Nos 48 Prov. MS Angle Iron (50X50x6 mm), Length : (950 mm) x 2 Nos for Bed Knee Bracing 49 Prov. Transformer LT Distribution Box and GO Switch fixing Assembly 50 Prov. MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos 51 Prov. MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos 52 Prov. GO Switch Handle Supporting: [Channel Iron (75x40x6 mm), Length : 460 mm 53 Prov. GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D type 54 Prov. D.O Fuse Unit 55 Prov. Lighting Arrester, 9 kV Station Class(Porcelain Type) 56 Prov. Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) 57 Prov. Stay set complete 58 Prov. Stay Wire (7/3.15 mm) (6.0 kg Per Stay Set) (Prov. By HPSEBL) 59 Prov. Pipe Earthing Set 60 Prov. LT Distribution Panel Box WithMCCB 100 amp 3P 35kA , ICS =100 % ICU, Kit-Kit 200 Amp 61 Prov. Half Clamp (M.S. Flat 50X6 mm) 62 Prov. Full Clamps (M.S. Flat 50X6 mm) 63 Prov. Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more(with flat and spring washers)] 64 Prov. Aluminium Thimble 65 Prov. Aluminium Thimble 66 Prov. Danger Plate 67 Prov. Barbed Wire 68 Prov. LT Cable (3.5 Core) 95 mm² 69 Prov. Energy Meter 3-ɸ, 4 wire CT operated Static Tri-Vector meter with Box(CT-100-200/5A) (Prov. By HPSEBL) 70 Prov. Aluminum Paint. 71 Prov. Prov. 6/1/3.35, 50mm² 72 Prov. Transformer structure Chain Link fencing , Angle Iron ,Gate etc & Protection plinth (Civil Work as per HPSR) . 73 Erection of 63 KVA S/Stn. i.e. digging of pit for pole & earthing two No. poles & 3 Nos. for earthdrilling of holes in X-arms, preparation of plateform str. Members C.I., A.L. i.e. X-arms & K.B. set, errection of D/P, concreating of RCC muff errection of plateform, errection of X-arms, D.O., L.A., MCCB, Switch LT box, energy meter, errection of transformer, earthing connection to G.O. switch, Transformer L.A. etc., errection of stay set, jumper, pipe earthing 3 Nos set, L.T. cable, barbed wire and painting complete in all respect. 74 Prov. Transportation & Manual Carriage Of Pole Mounted Distribution Sub Stn. Average Distance from road to site of work 75 Prov. GO AB Switch & DO Fuse unit for S/Stn 76 Prov. GO AB Switch Unit (11kV, 400A,)O/D type 77 Prov. D.O Fuse Unit, 11kvO/D type 78 Prov. Prov. X-Arm: [Channel Iron (75x40x6 mm), Length : (2800 mm X 4 Nos] for supporting DO fuse unit & GO switch 79 Prov. X-Bracing Set - MS Angle Iron: 50x50x6, Length: 2125 mm x 2 No 80 Prov. Belt Set - MS Angle Iron: 50x50x6, Length [(1800 x 2 No.] 81 Prov. 11 kV Pin Insulators (Porcelain, 12 kV, 10 kN): 6 No per structure. 82 Prov. Half clamps: [On Double Pole Dead End structure: 4 No; On Run Thro structure: 2 No ] 83 Prov. Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more(with flat and spring washers)] 84 Erection of GO Switch & DO Fuse Unit Complete in all respect 85 Prov. Additional Pole for Ground Clearance 86 Prov. Steel Tubular Poles (9 m, Working Load > 200 kgf/m²) 87 Prov. Muffs with concerete filling 88 Cross Arm: [Channel Iron (100x50x6 mm), Length:1270 mm i/c tolerance of 100 mm either side) x 3 Structure 89 Angle Iron (50x50x6 mm), Length: 750 mm x 2 No. x5 structures 90 Pole Top Bracket [MSCI:100x50x6 mm- 100 mm] 91 Prov. Pin Insulator with GI Pin 92 Erection of 9 Mtr. ST pole Single structure i.e. digging of pit, fixing of insulator, x-arms,K.B. set, Top clamp, barbed wire, danger plate, drilling of holes and filling of pit + rammingcomplete in all respect. 93 Mannual carriage of material 1 KM HT line considering average distance from road to site of work (0.030 Km) 94 Quantities are mentioned above are tentative and Actual Quantity shall be worked out after Check Survey to be carried out by the successful Tender and detailed Engineering and finalization of Tower location Chart.Payment shall be made as per Approved Bill of Material/Actual Quantities measured at site.
