Tender For Repair To Joinery, Plumbing, Sanitary, Roof, Plastering And Other Connected Bldg Repair Works In Otm-Vii Accn Of Age B/R-I Of Ge (North) Ambala Cantt; 1 Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete, all as specified and as directed. 2 M&L rough cast plaster 15 mm thickin cement motar 1:4 complete as specified in SSR Part–I, clause 14.22 shall consisting of following:– firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete, all as specified and as directed. 3 Material and labour forrendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 and finished even and smoothwithout using extra cement, complete, all as specified and as directed. 4 Material and labour for rendering 15mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 and finished even and smooth without using extra cement, complete, all as specified and as directed. 5 M&Lfor rendering 05 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 andfinished even and smooth without using extra cement complete, all as specified and as directed. 6 M&L for preparation of new plastered /concrete surface of wall applying of two coats of cement base paint over a coat of primer complete, all as specified and as directed. 7 M&L for preparation of new plaster surface on walls and applying two coats of oil bound distemper over a coat of chalk whiting complete, all as specified and as directed. 8 M&L for preparation of new plastered surface of ceilling applying three coat white wash complete, all as specified and as directed. 9 M&L for preparation of old decorated brick/concrete, plastered /unplastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the walls, pillars, cornices etc. up to height of triple storey bldg, including necessary scaffolding etc complete, all as specified and as directed. 10 M&Lfor complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, washing down with water to remove loose particles etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre per 10 Sqm up to height of triple storey bldg, including necessary scaffolding etc complete, all as specified and as directed. 11 M&Lfor preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete, all as specified and as directed. 12 M&Lfor preparation of new steel and iron surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete, all as specified and as directed. 13 M&Lforpreparation of new/old plastered surfaces of wall and applying 1mm thick wall care putty white cement based in two or more coats to achive smooth surface complete, all as specified and as directed. 14 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete, all as specified and as directed. 15 M&Lfor25 mm thick PCC 1:2:4, type B–0 as in sub base floor (using 12.50mm graded crushed stone aggregate), finished even & fair without using extra cement complete, all as specified and as directed. 16 M&L for black granite (of any type) tiles 16–18mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over 15mm thick screed bed in CM 1:6 and including rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations and including making holes for gas pipes or WHB outlet /inlet complete all as specified and directed. 17 M&L non–skid ceramic coloured tiles joint free premium/1st quality (square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including screed bed 15 mm thick in cement mortar (1:6) complete, all as specified and as directed. 18 Material and labour glazed ceramic coloured tiles joint free premium/1st quality in vertical surfaces/ skirtings /dados of size 300 x 450 x 7 mm thick or nearest size as required, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete, all as specified and as directed. 19 Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick (square/rectangular) area of each tile exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6 complete, all as specified and as directed. 20 Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick of same description as of floor tiles as in serial item No 19 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete, all as specified and as directed. 21 Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm and not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed by the Engineer–in–Charge. 22 Material and labour vitrified ceramic light shade tiles premium/1st quality 9-10mm thick of same description as of floor tiles as in serial item No 21 above but 100 to 150mm height as in skirting, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match over and including 10mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 complete all as specified and as directed by the Engineer–in–Charge. 23 M & L machine cut kota stone slab18 to 22 mm thick of size not less than 550mm x 550mm in floor, set and jointedin neat cement slurrywith greycementmixed withpigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 15 mm thick screed bed in CM 1:4 complete, all as specified and as directed. 24 M & L machine cut kota stone slab18 to 22 mm thick ( kota stone shall be cut from size not less than 550mm x 550mm) in skirting , set and jointedin neat cement slurrywith greycementmixed withpigment to match the shade of the slab including rubbing and polishing (granite finish) over and including 10 mm thick renderingin CM 1:4 complete, all as specified and as directed. 25 Demolition of cement concrete (un–reinforced) in ground floors and pavings not exe 15 cm thickness (below or above ground level) complete, all as specified and as directed. 26 M&L 100 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement complete, all as specified and as directed. 27 M&L providing 50 mm thick cement concrete 1:3:6 type C–1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (not exc 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete, all as specified and as directed. 28 Material and labour for 25 mm thick sand stone in chajjas shanshed shelves, cills, landing, plinth protection , cover stone, templatees etc not exc 2mm lengh, punched dressed on face and along expose edge self, faced on other side and set incement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade ofstone over and including 15mm thick rendering in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. 29 M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand with grey cement and no pigments complete, all as specified and as directed. 30 M&L plain cement concrete 1:2:4 type B–1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork for rough finished surfaces of concrete complete, all as specified and as directed. 31 Supply and fixing as in repair, water storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including dismantling of water tanks and removing from site all as specified in SSR Part–I complete, all as specified and as directed. 32 Supply and fixing as in repair, water storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore and including 20mm bore tank nipple & one 20mm GI union at outlet and including dismantling of water tanks and removing from site all as specified in SSR Part–I complete, all as specified and as directed. 33 S & F in repair PTMT grating doom 100 mm dia (Min wt 25 gms) complete, all as specified and as directed. 34 S & F in repair PVC water closet seat cover,white,closed pattern with flat bottom ,mild steel chromium plated or aluminised hinging device complete, all as specified and as directed. 35 M&L cleaning and removing all scale and dirt etc from PVC/RCC tanks and mouths of circulating pipe of capacity exceeding 250 litre and upto and including 1000 litre & writing on the tank with synthetic enamel paint not less than 200mm long and 20mm wide of words in shape like cleaned on : 15.06.2024 complete, all as specified and as directed.NOTE :- unit rate shall be included to make upsmall fittings such as elbow, socket, reducer, tee, union etc . 36 M&L galvanised iron tubing 20mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete, all as specified and as directed. 37 M&L galvanised iron tubing 15 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors as in repair complete, all as specified and as directed. 38 S&F 15mm bore cast copper alloy fancy type,chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, screwed both ends for iron pipe or for unions as in repair, complete, all as specified and as directed. 39 S&F 15mm bore cast copper alloy chromium plated angular stop valves with capstan head, screwed down, high pressure screwed both ends for iron pipe or for unions as in repair , complete, all as specified and as directed. 40 S&F fancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair , complete, all as specified and as directed. 41 S&F bib taps 15mm bore fancy type brass chromium plated with long body, wall flanges and capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair , complete, all as specified and as directed. 42 S&F PVC connections 15 mm size with PTMT nuts of length 450 mm as in repair , complete, all as specified and as directed. 43 S&F vitreous china wash hand basin white, flat back of size 550mm x400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc as in repair , complete, all as specified and as directed. 44 S&F as in repair brass chromium plated shower rose 100mm size swivel type with arm of standard size as per site suitable for 15mm bore pipe, complete, all as specified and as direced. 45 S&F vitreous china squatting pan, Orissa pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe as in repair , complete, all as specified and as directed. 46 Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including water closet pvc seat cover white closed pattern with flat bottom and cover including making connections and fixed in position as in repair , complete, all as specified and as directed. 47 S&F mild steel chromium plated hand shower (health faucet ABS body) suitable for 15mm dia pipe with 8 mm dia 1.25 mtr long flexible tube and ABS wall hook including making connection as in repair , complete, all as specified and as directed. 48 S&F 10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC as in repair , complete, all as specified and as directed. 49 Supply and fixing as in repair vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe) but including brass chromium plated spreader, PVC waste pipe, providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) , complete, all as specified and as directed. 50 S&F 20 mm bore Gun–metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe as in repair , complete, all as specified and as directed. 51 Supply and fixing as in repair, brass chromium plated WHB mixer swan neck for mixing hot & cold water for 15mm bore pipes including all connecting fittings, screwed down for iron pipe and fixed , complete, all as specified and as directed. 52 S&F CP brass wall mixture 3–in–1 system for mixing hot and cold water suitable for 15mm bore pipe complete with 115 mm long bend pipe, connecting legs & wall flange and wall bracket for hand shower as in repair , complete, all as specified and as directed. 53 Supply and fixing as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges , complete, all as specified and as directed. 54 Taking down chowkats or frames with shutter area not exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish , complete, all as specified and as directed. 55 Taking down chowkats or frames with shutter area exceeding 1.50 Square meter and not exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish, complete, all as specified and as directed. 56 Taking down shutters of any description area exc 1 sqm and not exc 2 sqm and removing from site , complete, all as specified and as directed. 57 Taking down shutters of any description area exc 1 sqm and not exc 2 sqm each and refixing in the same opening , complete, all as specified and as directed. 58 M&L rolled mild steel framed work as in chowkats of door or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixingconforming to Fe–410–W (Grade E–250) quality A , complete, all as specified and as directed. 59 Supply and fixing factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated , complete, all as specified and as directed. 60 Supply and fixing factory made 35 mm thick 2nd class hard wood glazed and skeletonshutters, open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) , complete, all as specified and as directed. 61 S&F powder coated aluminium section (minimum thickness of powder coating 50 micron) for frame and shutters of doors, windows (fixed, sliding, hangung) & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws , complete, all as specified and as directed.Note : (a). Glazing shall be measured and paid separately.(b).Weight of aluminium sections shall be as per IS or actual weight which ever less shall be measured.(c). The rates quoted shall be inclusive of neoprene beading, glazing clips, jointing clips, screws, etc as required and the same shall not be measured for arriving the weight.(d). The rates shall be inclusive of locking arrangement including complete packing with silicon gel alround contacting surface of aluminium framework and including matching the existing surface area complete all as specified and directed. 62 S&F anodised aluminium grill (anodized transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to thewindow frame with C.P brass/ stainless steel screws @ 200 mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodized aluminium standard section around the opening, , complete, all as specified and as directed. 63 Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelam sheet andfixed in opening , complete, all as specified and as directed. 64 S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick plain moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing , complete, all as specified and as directed. 65 S&F stainless steel butt hinges 100mm long medium weight , complete, all as specified and as directed. 66 S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed , complete, all as specified and as directed. 67 S&F 100 mm long aluminium anodised barrel tower bolts of extruded section and fixed , complete, all as specified and as directed. 68 S&F 150 mm long aluminium handle fabricated type anodised , complete, all as specified and as directed. 69 S&Ffloor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm , complete, all as specified and as directed. 70 Supply and fixing 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter , complete, all as specified and as directed. 71 S&F aluminium (Diecast) body hydraulically door closer regulated, designation No. 3, universal type, suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg , complete, all as specified and as directed. 72 S&F for 65 mm size long mortice lock vertical type, 2 levers with key in duplicate, mild steel body fixed in shutters with screw , complete, all as specified and as directed. 73 S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty fixed , complete, all as specified and as directed. 74 Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles , complete, all as specified and as directed. 75 M&L brick work with sub class B old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 , complete, all as specified and as directed. 76 All as per serial item No. 75 here in befor but except bricks(old serviceable bricks obtained from serial item No74aboveincluding removing motar, cleaning the bricks with water,shall be used ),complete all as specified and as directed by the Engineer-in-Charge. 77 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds and steel window frame glazed with putty or fixed with beads , complete, all as specified and as directed. 78 M&L sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane , complete, all as specified and as directed. 79 S&F 3mm thick frosted sheet glass ordinary type and glazing with aluminium beading, rubber packing or oil putty in square n exc 0.5 sqm each pane complete all as specified and directed. 80 M&L sheet glass 4.8mm thick tinted quality and glazing with aluminium snap beading, rubber gasket in square not exc 0.5 sqm in each pane , complete, all as specified and as directed. 81 M&L 12mm thick prelaminated particle board interier grade (grade–1) confirming IS 14587 prelaminated both side with decorative choice lamination and fixed to aluminium door shutter with glazing clips, rubber , complete, all as specified and as directed. 82 S&F galvanised mild steel wire cloths 0.56 mm nominal dia of wire and average width of aperature 1.18mm and fixed with tinned tacks or galvanised mild steel wire staple , complete, all as specified and as directed. 83 S&F galvanised mild steel wire cloths 0.56mm nominal dia of wire and average width of aperature 1.18mm and fixed to steel/wooden /aluminium window/ frame with tinned tacks or galvanised mild steel wire staple as in repair , complete, all as specified and as directed. 84 Demolition and breaking up drain pipes and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan–necks, etc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) , complete, all as specified and as directed. 85 S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall , complete, all as specified and as directed. 86 S&F 110mm bore PVC (SWR) bends of any radius , complete, all as specified and as directed. 87 S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor or fixed to wall , complete, all as specified and as directed. 88 S&F 75mm bore PVC (SWR) bends of any radius , complete, all as specified and as directed. 89 M&L 75mm bore PVC (SWR) floor trap with grating including jointing with solvent cement including fixed in cement concrete as in repair complete all as specified and as directed by the Engineer–in–Charge 90 Taking down rolling shutter of any size and any type and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr–in–charge. 91 S & F steel rolling shutters 1.25 mm thickness of laths, with required ball bearing for rolling shutter including shaft, top cover, guide channel, anchoring rod, hasp and staple and one shop coat of primer, erected/fixed asrequired in position complete push pull or manual type complete all as specified and as directed by the Engr-in-charge. 92 S & F Steel rolling shutters 1.25mm thickness of laths, with required ball bearing for rolling shutters, including shaft, top cover, guide channel, anchoring rod, hasp and staple,gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers including one shop coat of primer, erected/fixedin position as required complete all as specified and as directed by the Engr-in-charge. 93 Taking down rolling shutter push pull or manualor gear operated type including taking down accessories like shaft, top cover, guide channel and straightening/ rectify warped/buckled parts, replacing unserviceable components/parts with new with and including cleaning/overhauling, greasing/oiling, make functional rolling shutter in all respect and refixing the same in same opening to walls/RCC members all as directed by the Engineer-in-Charge. 94 S&F asin repair ball bearing for rolling shutters complete all as specified and directed by Engr-in-Charge 95 S&F as in repairsafety lever locks, mild steel with four levers for rolling shutter complete all as specified and directed by Engr-in-Charge 96 Dismantling Brick tiles or terracing tiles, single layer on roofs , complete, all as specified and as directed. 97 Demolition of mud in roofs, any thickness, including plastering and leeping (whethere full thickness removed or only a part thereof) including emoving old tar felt, all loose dirt, cement plaster, cleaning the concrete surface including removal & cleaning of vegetation, fungus, moss, small trees etc from the roof top with wire brush, removing the strips of lightening conductor including refixing the same after repair work complete all as specified and directed by EIC 98 M&L for providing cement concrete 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops, padding, rounded or chamfered on edges including from work where ever required , complete, all as specified and as directed. 99 Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bituminous primer @ 0.40 litre /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temperature and viscosity 70–160 cps over the primer coat with overlap of 100mm at theside and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc. after preparing the surface complete as per standred practice as per manufactures instructions. The vital physical and chemical parameters of the membrane shell be under :–(i) Joint strength in longitudinal and transverse direction at 23 degree centegrate at 650/ 450 N /5 cms(ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d–5147)(iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only, complete, all as specified and as directed.(iv)The work shall be carriout at a height upto 12 metre. 100 M&L cement concrete tiles 20 cm x 20cm x 20 mm thick, machine pressed laid on screed bed and joints grouted flush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 , complete, all as specified and as directed. 101 S&F double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutterfabricated fromfollowing sections :-(a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leafof T – section20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf .(c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mmmade from 1.25 mm thickMS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i)Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf.iii) MS tower bolt stove enamelled150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf (vi)Pintal hinges 12 x 75 mm- 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame .(viii) Two coat of Synthetic enamel paint over one coat ofred oxide primer.(ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter ofwindow with flat iron 15 x 03 mm with steel screws .(x) 3mm thick sheet glass, ordinary quality and with oil putty in square n. exc 0.5sqm in each pane fixed in glass shutter of window.(xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed.Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit.(ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessories as mentioned above.(iii) The window upto1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable.The window more than 1.00 metrewidth shall have two openable leaves onboth outer sidefor gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. 102 S&F 32/40mm dia PVC waste pipe of standard length for wash hand basin /Kitchen sink etc as in repair , complete, all as specified and as directed. 103 S&F as in repair stainless steel curtain rod 25mm dia having wall thickness 1.00mm with and including stainless steel decorative brackets, two lotto for each rod length at both end etc fixed with stainless steel screws , complete, all as specified and as directed. 104 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets and false ceiling frame work, complete, all as specified and as directed. 105 S&F 5mm PVC hollow sheet (the thicknees of inner wall 0.7 to 1.00mm) in wall panelling inclusive of solvent cement and fixing at site with U clip or PVC frame as per specifications and drawing complete all as specified and as directed by the Engineer–in–Charge 106 S & FGI Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paintcomplete for all heights as per specifications including4mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic or equivalent) decorative finish fixed toframe work with holding down clips in false ceiling complete all as specified and as directed 107 Note:-Amount of credit ofRs. 64,725.00 for retrieved materials is mentioned in Schedule of Credit Page No…123 & 124of tender documents in pdf form which will be deducted offline while acceptance of tender.
