Tender For Repair/Improvement Work In The Office Of The Executive Engineer Construction Division-2, Pwd, Ghaziabad, ghaziabad-Uttar Pradesh

Tender For Repair/Improvement Work In The Office Of The Executive Engineer Construction Division-2, Pwd, Ghaziabad--1 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 2 Finishing walls with Acrylic Smooth exterior paint of required shade 3 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 4 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 5 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade 6 Brick work with common burnt clayF.P.S(non modular) brics of class definination 7.5 in super stractor above plinth level up to floor level in all shape and sizes in 1:6 cement & coarse sand mortar including supply of all material, labour, T&P etc. required for proper completion of the work. 7 12 mm thick plaster with cement and Coarse sand of 1.25 F.M. mortar in 1:4 ratio over brick works including supply of all material, labour & T&P etc. complete. (As per DSR no- 13.4.1) 8 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 9 Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 10 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm 11 Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595mm of approved texture, design and patterns as per CPWD Specification 2019, to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mmthick (galvanized @ 120 grams per sqm including both sides)comprising of main-T runners of size 24x38 mm of length 3000 mm,cross - T of size 24x32 mm of length 1200 mm and secondaryintermediate crossm length and L-shape level adjuster of size 76x25x25x1.6 mm fixed with grid and Z cleat of size 25x37x25x1.6mm thick with precut hole on both 25mm flange to pierce into 12x50mm or even bigger size dash fastener if require, fixed with Glavanised iron perimeter wall angle or size 24x24x0.40 mm of length 3000 mm to be fixed on periphey wall / partition with the help of plastic rawl plugs at 450mm center to center and 40 mm long dry wall S.S screws. The workshall be carried out as per specifications, drawing and as per directionsof the Engineer-in- Charge 12 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge as per DSR 10.31 15 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required. (S.I. no.17.4.1 DSR ) 16 Providing and fixing white Flat back wash basin of size 550x400mm Hundustanware or Equivalent including making all connections but excluding the cost of fitting complete as per direction of Engineer in charge. ( Item no. 17.25.2 of DSR) 17 Providing and fixing ball valve (brass) 15mm nominal bore ISI marked approved quality as per direction of engineer in charge 18 Providing and fixing C.P brass 15 mm nominal bore long body bib cock of approved quality confirming to ISI standards and weighing not less than 690 gms. 19 Providing and fixing brass bib cock 15 mm nominal bore of approved quality confirming to ISI standards. 20 Providing and fixing PTMT 15 mm nominal bore Pillar cock of approved quality confirming to ISI standards. 21 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete 40 mm thick with 20 mm nominal size stone aggregate 22 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 23 Demolishing brick work manually/ by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge in Cement Mortar ]as 24 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead 25 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below

INR 856 /-

INR 145000.0 /-

Refer document

FileName	File Description	File Size
Click here to download tender document	Tender Notice	0 KB
Click here to download tender document	Tender Document	0 KB
Click here to download tender document	Tender Document	0 KB