|
| 1 | PROVIDING AND FIXING MODULAR FURNITURE TO STATE EXCISEDEPARTMENT BUILDINGAT AMRAVATI |
| 2 | CANTEEN TABLE @ 1200LX900DX750H TTABLE TOP :18MM THK HDHMR POSTLAM PB WITH STR EDGE BAND 1200X900. UNDERSTRUCTURE:C type Legs - Verticals Made up of 50x50x1.6 MM thick& Horizontal Connecting member made up of 40x40MM MS pipe finished in Powder coating. Cross members made up of 40x40MM Lip section finished in Powder coatingare connected to Legs with Brackets for table suppo |
| 3 | TABLE 2100WX900DX750HWITHWRAP RETURN STORAGE @ 1050WX460DX750HT. & WRAP BACK STORAGE @ 1350WX460DX750H.2 NOS .FOR SUPERITENDENT CABINWrap cabin table. Supply, Fitting & Fixing of SOS Make Wrap Cabin TableWork Top- Is made up of 37mm thick dual color edge in Sandwich of 25 thk Prelam particle board and 12 mm thk BSL Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section.Understructure –Gable end is made up of 37mm thick dual color edge in Sandwich of 25 thk Prelam particle board and 12 mm thk BSL Prelam particle board confirming to IS 12823: 1990 in slate grey with 2mm & 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Sandwiching is done by using 10x12mm KD and 8x12mm Dowel. Gable end shall be fitted to the ground with M6x25 screw leveler with the height adjustment up to 12mm to 15mm.modesty is made up 18 mm thick Prelam particle board confirming to IS 12823: 1990 in slate grey with 2mm & 0.45mm thick PVC lipping glued with Kliberit-779.6 glue. Sandwiching is done at lower edge of the modesty by adding 18 mm thick Prelam particle board confirming to IS 12823: 1990. |
| 4 | Executive\"s Table @ 1800Lx900Dx750HT Providing & Fixing Of Table @ 1800Lx900Dx750Ht - Top & Gable End To Be Made Of Prelam Finish With Soft Water Fall Edges & Curved Panel & Decorated Anodized Section Modesty Panel To Be Made Of 18 Mm Thick Prelaminated Particle Board WithPvc Edge Band As Per Drawing |
| 5 | Classroom Writing Pad ChairBACKREST:The Back is made up of 12mm thick (7 layers) hot pressed plywood and moulded foamthickness 40 mm upholstered with fabric. 480 mm (H) X 455 mm (W)SEAT:The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foamupholstered with fabric. Seat Size 470 mm (W) X 480 mm (D).SEAT AND BACK FOAM:Foam made out of moulded Polyurethane foam with the following properties:• Density (IS-7888-1976) : 50-55 Kg/m3.• Hardness: 28+/-3 Kgf.• Compression set (IS-7888-1976): 10% Max.• Tensile strength (IS-7888-1976): 0.9-1.2 Kg/cm2• Tear strength(Min) (IS-8067) : 0.6 Kg/cm(min)• Resilience (IS-7888-1976): 40% - 60%• Elongation (IS-7888-1976): 110 %ARM PAD:FIXED ARM : The arm pad is moulded fromBlack polypropylene - size 245mm (L) x 67mm (W). |
| 6 | Executive\"s PRELAM STORAGE @900LX450DX750HT. Supply, Fitting & Fixing ofMake Prelam Storage.Storage Top- Shall be made of 25mm thick Prelam particle board for low height Prelam storage up to 750 Height and above 750mm height 18mm Thick prelamparticle board is used. Both the 25mm and 18mm thick Prelamparticle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Storage top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section. Load carrying capacity of 18mm thick shelf shall be 25kgs UDL.Storage Body- The construction shall be aesthetically appealing completely knock down construction .side panel and back panel is made from 18 mm Prelamparticle board conforming to IS 12823:1990;. All the exposed edges are with 2mm PVC lipping& sealed edges are with 0.8mm thick PVC Lipping. Both the LH & RH side panel and back panel are connected with each other by using fittings such as Minifix & Dowels. Shelf can be made up of 18mm Prelam particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Shelf is mounted on shelf pin and self-height can be adjusted with in the limit.Prelam Shutter- The complete storage shall have two shutters of 18mm thick |
| 7 | (2B+1F) PEDESTAL @ 400LX450DX670HT.PEDESTAL @ 400LX450DX750HT.Pedestal Top- Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section |
| 8 | Public Seating Chair. - 3 SeaterProviding and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. |
| 9 | Medium Height Partition @ 1200HTMedium Height Partition @ 1800/1200HT TILE BASED PARTITION SYSTEMTile based Aluminum partition system of 1800/1200mm ht. made of 60mm thick aluminum frames having two separate race ways for laying electrical & computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machine screw and washer with aluminum post cover. Post cover snap on |
| 10 | Full Height Partition With Glass FinishFull Height Partitions in Glass finish -Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frame construction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way Round Shape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 5mm thk. Non Toughened Glass on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 11 | Full Height Partition in Solid FinishFull Height Partitions in Solid finish - Providing and Fixing 80mm to 85mm thick Full height Double Skin partition up to 3 mtr height with All visible sections in Anodized / Powdercoated finish. Made up of Frames and Tiles. Frameconstruction In combinaton of Aluminium Rails and Bottom ,Center and Top members, Connected with 2 way RoundShape Post , 3way Post , 4 way Post made up of Aluminium Extruded and Tiles in 9mm thk. PrelaminatedParticalBoard of on both side. With all the Joints in the partitions covered with PVC extrusions to provide better sound Proofing. Tiles to be separated 55mm from each other to provide adequate space for drawing cables for electric, data and telephone with proper facility for fixing electrical and data switch plates. as per design and drawing. |
| 12 | Glass Door With Door FrameProviding & fixing of Glass Door & Frame @ 900mm x 2100mm-12mm thk toughened glass door with frame in Anodized Aluminium with rubber gasket on both verticals for better sound proofing and provision for one side opening along Hardware consisting of Floor Spring Dorma/ Equivalent, Patch fitting, Lock, door stopper and Handle, as per design and drawing and instructions of Engineer in charge |
| 13 | OFFICE RECEPTION TABLE @ 1800 x 750 x 1140OFFICE RECEPTION TABLE @ 1800 x 400 x 1140mm ht - For RECEPTION TABLE TABLE TOP: 25 MM thk. Prelaminated Particle Board with 2MM PVC Edge band on all side. Table top at 750MM height from floor level. Cut-out provision for wire manger or Access flap as required.UNDERSTRUCTURE: C type Legs - Verticals Made up of 50x50x1.6 MM thick & Horizontal Connecting member made up of 40x40MM MS pipe finished in Powder coating. Cross members made up of 40x40MM Lip section finished in Powder coating are connected to Legs with Brackets for table support. STORAGE-To be made up of Prelam Particle Board with Pvc edge band on all side. Colour: Decorative add on panel in Persian walnut. All other panels in Everest white |
| 14 | HIGH BACK CHAIR FOR OFFICERHIGH BACK CHAIR SpecificationBackrest High Mid backUpholstery: Backrest : Mesh (Black)Seat: Fabric (Black, Red),Armrest: 1D PU Armrest,Mechanism: Synchro 1P,Gaslift: Class 4, 112mm StrokeBase: Nylon Dia 660mmCastor: Nylon, Dia 60mmLumber: Yes |
| 15 | HIGH BACK CHAIR For Excutive OfficerAdjustable Seat Height, Armrest, Locking Mechanism, Seat Lock, Swivel, Wheels, Head Support W x H : 63 cm x 114 cm Frame Material : Sold Wood Upholstery Type : Cushion Diy : Basic assembly to be done with simple tools by the customer, comes with instructions. |
| 16 | MID BACK REVOLVING CHAIR For StaffProviding & Arrangemnt of MId Back, Normal Syncro Mechanism , Fixed Armrest ,Gaslift for Seat height adjustment, Standard 5-prong/Nylon Base with Leather Upholstery |
| 17 | 2 SEATERSOFA @ 1415LX775DX800HT. OVERALL SIZE - 1415 X 775 X 800 mm (LxDxH) for 2 seater sofa Supply and placing of Host sofa 3/2/1 SEATER over all dimension for 11915 / 1415 / 880 mm length and over all height is 800,over all width is775 mm, seat height is 430 m,seat depth is,550mmunderstructure is made up of Natural Hard wood battens and 12mm THK COMMERCIAL PLYWOOD.High density foam is used for seat and back ,LEATHERITE-ABRASION RESISTANCEin excess of 80,000 cycles, 600 to 650 GSM composition is PVCand color As Per Buyer Choice. |
| 18 | SOFA 3 SEATER /LEATHERETTE FINISH/ SS LEGS / 1900LX750DX880HSpecifications: Frame : The sofa’s frame is made from solid, sustainable wood and commercial ply Upholstery: Fabric / Leatherette upholstered back and seatBase-frame: 40x22x1.6mm thk SS pipe Base frame finish: SS (mirror finish). |
| 19 | SOFA 1 SEATER /LEATHERETTE FINISH/ SS LEGS / 1900LX750DX880HSpecifications: Frame : The sofa’s frame is made from solid, sustainable wood and commercial ply Upholstery: Fabric / Leatherette upholstered back and seatSize:1010Lx900Dx850H mm thk SS pipe Base frame finish: SS (mirror finish) |
| 20 | Corner/ Side Table @ 400LX 400DX 415H Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18mm thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding |
| 21 | Centre Table 900mm X 750mm X 450mm for m.s. ante chamberProviding And Fixing Of Tea Table 900mm X 750mm X 450mm With 12mm ThickColour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18mm ThickWaterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm ThikVeneer Or 1 Mm Thik Mica Etc. |
| 22 | Providing and Fixing Rollar Blinds AMI Make or approved make & shade of 38mm round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) |
| 23 | Alluminium foldable ladder for storeProviding & Fixing Foldable Alluminum Ladder 1500 mm. Ht. |
| 24 | Directional signageFire exit and floor identification signage as per manufacturer\"s specifications, ADA compliant and modular system |
| 25 | Directional signageProviding and fixing SS Braille buttons in the elevator of the approved brand and make to be installed using the specified adhesive and as per the instructions given by the manufacturer |
| 26 | Providing a folding wheelchair of Pioneer Surgicals Brand, model Number PS 809/ equivalent make as per the directions of the engineer in charge. |
| 27 | Wooden Movable PartitionFree Standing Finish Type Natural Burnt Suitable For General Utility Furniture, Bedroom Upholstery IncludedNumber of Panels 3 Foldable Screen Type Decorative Screen Model Series Name Handcrafted 3 Panel Wooden MDF Room Divider Screen With StandIncluded Primary Material Wood Primary Material Subtype Wood Secondary Material Wood Secondary Material Subtype MDF Primary Color Brown Finish Color Brown Dimensions Width 152.4 cm Height 182.88 cm Depth 1.828 cm Other Dimensions Each Panel Length - 20 Inch, Height - 72 Inch |
| 28 | Chair Visitor For CabinFRAME :- MS CROME PLATED CAPSULE PIPE , ARM :- CHROME + CUSHIONED , SAT & BACK :- 15.MM HOT PRESS PLYWOOD & 50.MM FOAM SHEET BACK 40.MM , LEATHRITE UPHOLSTERY , CHAIR FULL HIGHT :-38\" , CHAIR(W):- 23\" , SEAT (W):-20\", SEAT (H):-20\" , BACK (W) :-19\" , SEAT THIK :- 50.MM , BACK THICK:-40.MM , SEAT TO BACK (H):-22\" |
| 29 | Chair For CanteenProvinding and fixing in position Made From Organic Pigments With High Uv Stability For 500 Hours Scratch Resistant Chair Surface Stackable For Better Space Management including all fixtures and fasteners, etc complete as per approved shade and colour. |
| 30 | Free Standing Table @ 1350Lx600Dx750HTProvinding and fixing in position Office Table having top made up of 30mm thick PPB + PVC foiled Strip with PVC Chrome Strip on Modesty and other structure made up of 18mm thick PPB with PVC edgebanding, including all fixtures and fasteners, etc complete as per approved shade and colour |
| 31 | Free Standing Table @ 1200Lx600Dx750HTProvinding and fixing in position Office Table having top made up of 30mm thick PPB + PVC foiled Strip with PVC Chrome Strip on Modesty and other structure made up of 18mm thick PPB with PVC edgebanding, including all fixtures and fasteners, etc complete as per approved shade and colour |
| 32 | WUDMATE chair with arms The seat and back shall be made up of wood veneer with foam back. The chair can also be provided with fixed wooden armrests .The dimensions of back shall be 49 cm (W) X 37 cm (H) and of seat shall be 51 cm (W) X 50.0cm (D). The Seat and Back Inner shall be upholstered with PU foam and fabric and shall be assembled over the seat and back.The chair is made of Rubber wood veneer with thickness of the leg 25 mm and width of the leg at 28mm. Seat Height - 46 cm, Height-83.0cm, Width & Depth of Chair as measured from base - Width-60.0cm and Depth-56.0 cm.Dimensions tolerance / variations shall be within +/- 1 cm. |
| 33 | Provinding and fixing signages of various size as per design of whit 6 mm imported acrylic sheet with laser cut vinyl ltters over acrylic sheet including all lead,lift and necessary fixtures required etc complete. |
| 34 | Provinding and fixing maharashtra government/department logo using wood platic composite or equivalent with exteriror colur and polish in size 6 feet x 4 feet |
| 35 | Provinding and fixing maharashtra government/department logo using wood platic composite or equivalent with exteriror colur and polish in size 6 feet x 2 feet |
| 36 | Slotted Angle RackSupply and installation of slotted angle rackSlotted angle- Slotted angle is made up 2mm thick CRCA sheet confirming the IS grade IS 513:2008 coated with final finish consisting of epoxy polyester powder coat of approved color & shade with a Dry Film Thickness of minimum 50 to 60 microns. Angle length is equivalent to the height of the storage which is approx. 2100mm or 1830mmShelf-Is made up of 0.8mm CRCA sheet confirming the IS grade IS 513:2008. All the four edge is having a bend of 25mm. |
| 37 | Full Height Steel Storage @ 750Lx450Dx2100HProviding and fixing Openable Steel Storage of 750 x 450 x 2100Ht, with 4 adjustable shelves, Complete body & shutter made in0.8 mm thick & Topin 2 mm thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. |
| 38 | Sofa Cum BedProviding & fixing of C3 Make CS - 98 Sofa Cum Bed Size 5 x 6 1/4 with Mattress having main frame made up of 15mm thick Three Layer Pre-laminated Particle Board of Grade IS 12823 with 9mm thick Three Layer Pre-laminated Particle Board of Grade IS 12823 Batten to enhance the look and aesthetics. Main Frame also consist of MS Tubular Frame of pipe 40x25x1.6 mmduly powder coated to make the structure rigid and sturdy. It is fixed with the help of special type of fixtures. The design of HB & FB is made in combinationof 15 & 9mm thick Three Layer Pre-laminated Particle Board of Grade IS 12823 with 1.5mm thick PVC edge banding fixed with the hot melt glue on through feed edge banding machine. The Panels of HB & FB are cut in 45 Degree and joined in the same manner. Side Bar or Handle are made in combination of horizontal and vertical panel of 15mm thick Three Layer Pre-laminated Particle Board of Grade IS 12823 with 1.5mm thick Edge banding fixed with the hot melt glue. The Bottom trolley is having inside storage with 4 wheel castor mounted at the bottom for easy movement of trolley. Foldable Mattress consist of 32 density foam of 95mm & 45mm thickness covered with fabric with the help of Zip & Runner,including all fixtures and fasteners, etc complete as per approved shade and colour.The product should be from a manufacturerhaving ISO 9001:2015,ISO14001: 2015 ISO 45001:2018, ISO 45001: ISO 50001:2018,BIFMA Membership,AIOTA Certificate,IGBC Certificate, DPIIT Certificate, MSME, GreenguardCertificate. |
| 39 | LockersMultiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht.Providing and fixing Multiple Compartment Lockers @ 1140Lx 457D x 1830 mm. Ht. with 12 Compartments , Complete body & shutter made of CRCA Sheet with powder coated finish as per approved color. |
| 40 | PRELAM FREE STANDING TABLE @ 1500LX600DX750HT. WITH 2B+1F PEDESTAL @ 400LX450DX670HT. Supply, Fitting & FixingPrelam Cabin.Work Top- Shall be made up of Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Work top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker sectionUnderstructure- Modesty panel shall be made of 18mm thick Prelam BSL particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Prelam BSL particle board confirming to IS12823: 1990. The construction shall be aesthetically appealing completely knock down construction fitting is done by using the Minifix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top. Standard depth of work top will be 600mm and 750mm.Wire management- Wire manager cap on the table top shall be made of ABS material having Diameter 63.5mm standard.The product must be from a Manufacturer having ISO 9001,ISO 14001,Latest BIFMA 5.1 certificates for few of its products.2B+1F PEDESTAL @ 400LX450DX670HT. SPECIFICATIONS :-Pedestal Top- Shall be made 18mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker section |
| 41 | CONFERENCE TABLE @ 4500LX1500DX750HT.FOR CONFERENCE ROOMSupply, Fitting & Fixing ofConference Table-Work Top - Work top shall be made 25mm thick Prelam (OSL) particle board confirming to IS 12823: 1990 with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Table top is under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric load test by applying 90kg load on weaker sectionUnderstructure - RECTANGULAR LOOP LEG Verticals constructed of 50X50X1.6 mm M.S. pipe confirming IS-Grade 4932 with powder coated finish up 50 to 60 Micron. Horizontal Connecting member made up of 40x40MM MS pipe finished in Powder coating. Cross member shall be made of 40mm X 40mm X 1.6mm MS LIP Section with powder coated finish confirming to IS 4932. Cross members shall be mounted by end brackets. Cross member end bracket shall be made of 3mm thick IS 513: 2008 CRCA sheet with powder coated finish up 50 to 60 Micron.Wire management – Electrical wires shall be carried from 100x100mm vertical duct or Snake (Vertigo), vertical duct shall be made of 0.7mm CRCA sheet confirming to IS 513:2008.Horizontally wire shall float in switch mounted box 400LX174DX125H shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Or Cable tray shall be made of 0.7mm CRCA sheet confirming to IS 513:2008. Switch plate is provided on Switch Mounting Box or cable tray for |
| 42 | ProvidingandFixingof MineralFibreBoardAcousticalSuspendedCeilingSystemwith ultima(BevelledTegular)Edge Tilesofsize 15mm ExposedGRID.The tilesshouldhave Humidity Resistance (RH) of 99%, NRC 0.7, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 20 mm , suitable for Green Building application, with Recycled content of 32%. The tile shall be laid on precoated G.I.channel onXL2 Clip having a web height of 32 mm with15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm anda load carrying capacity of 7.7 Kilograms/M2 andminimum pull out strength of 100 Kilograms.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete. |
| 43 | ACOUSTICAL WALL PANELLING – FABRIC WRAPPED OF SIZE: 600X600/1200X25MMProviding and Fixing of Acoustical Wall Panel with square edges made of fibre glass substrate 25mm thick, wrapped on the front side with an acoustically transparent fabric as per the approved shade (Husk, Copper, Sangria, Sesame, Coffee, Charcoal, Titanium, Flame, Peanut and Shell). The panel shall be classified for Fire Class A, as per ASTM E-84. The Acoustical Wall Panel shall be of sizes 600x600mm (Nominal) or 600x1200mm (Nominal) and shall achieve an NRC of 0.85 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) with 50mm airgap as per ASTM C423 to be fixed to wall on a framework of wooden battens and using Wall panel Impalers (supplied by the manufacturer) or by using construction adhesives (as per the instructions laid down by the manufacturer). The fibre glass substrate shall have a recycle content of 85%. Installation:An appropriate vapour barrier (by others) shall be applied/installed on the vertical surface before the installation to properly seal against entry of any moisture. Vapour barrier (by others) shall be installed as per Manufacturer’s recommendation. Install wooden batten grid (provided by others) of section 50x50mm or as approved by the Architect on the solid wall/partition to provide level and plumb surface. The Impalers shall be fixed to the battens using self-tapping screws, 3 nos. in case of 600x600mm and 4 nos. in case of 600x1200mm. Silica based construction adhesive (by others) to be dabbed on to the projecting elements (spikes) of the Impalers. Wall Panels shall be pierced through the spikes of the Impalers ensuring the line and level of the panels are maintained |
| 44 | CPU TrolleyWidth - 230 - 345mmDepth - 226.0mmHeight - 180mmMetal Tray - Tray is made of 1.0 mm thick MS CRCA Sheet and Side support is made of 0.8 mm thick MS CRCA Sheet.Castor - Lockable/Non-lockable twin wheel castors are injection molded in Black Nylon. |
| 45 | Keyboard Placement TrayOverall Dimensions (mm) - W1 - 522.0mmW2 - 685.0mmD1 - 415.0mmD2 - 645.0mmH min - 90.0mmH max - 110.0mmSPECIFICATIONS: Metal Tray - Tray is made of 0.9 mm thick CRCA\"D\" Grade as per IS-513. (Size-482(W)x280(D)x40(H))Single Extension Ball Slide assembly - 350 mm(long)x11.8mm(Thk) Single extension (Stroke: 230mm) Ball-slideMade of combination of 1.2/1.5mm thk roll-formed CRCA \"D\" Grade as per IS-513.Mouse Tray - Option retrofit mouse tray is provided which could be fitted at right hand or left hand as per user requirement. Mouse tray (size 210 x 210) is made of 0.9 mm thick CRCA \"D\" Grade as per IS-513. |
